Is your machinery stopping because of broken wires?
You know the feeling. Your production line is running fast. Then, suddenly, a sensor fails. A robotic arm stops moving. You check the problem. The cable inside the drag chain is cracked. The copper is broken. Or maybe the signal is messy because of noise from other motors. This happens with cheap cables. They are not made for constant movement. They get stiff. They break. You lose money every minute the machine is down. You need a cable that moves like a snake but protects the signal like a fortress. You need a cable that bends millions of times without failing. This is why we bring you the Japan HANSHIN 20-core 0.15mm² twisted pair shielded drag chain cable. It is not just a wire. It is a life-line for your automation equipment.
What makes this cable special?
This cable comes from Japan HANSHIN. They are experts in wire technology. This specific cable is built for “continuous flex.” This means it never stops moving. Inside, you have 20 cores. Each core is 0.15 square millimeters. That is small, but powerful. The wires are made of ultra-fine stranded copper. Think of a rope. A thick rope cracks if you bend it too much. But many thin threads make a strong rope that bends easily. That is what we do here. We use Class 6 fine stranding. The copper is tinned. This stops rust. It fights corrosion. The conductors are oxygen-free. This means the signal is clean. You get no loss of data.
How does the shielding stop noise?
Factories are noisy places. Motors, welders, and VFDs create electromagnetic noise. This noise can mess up your data signals. If your sensor sends a “1” but the noise changes it to a “0,” your machine crashes. This cable solves that. It uses a twisted pair structure. Two wires twist around each other. This cancels out noise. But we go further. We add a shield. It has a mesh of tinned copper wire. It also has aluminum foil. This double shield blocks outside interference. It keeps your signals safe. It is like a armor for your data. This is vital for servo encoders and RS-485 communication. You need precision. This cable gives you precision.
Built for the toughest environments
Your factory floor is dirty. There is oil. There is coolant. There is dust. Standard PVC jackets get sticky. They crack in the cold. They swell in oil. This HANSHIN cable uses special compounds. The outer sheath is PVC or PUR. PUR is tougher. It resists oil. It resists abrasion. It handles -30°C to +80°C. The cable can travel up to 100 meters. It handles tight bends. The bending radius is 5 to 10 times the diameter. It fits in small drag chains. It does not kink. It does not twist into a “corkscrew” shape. This keeps your cable carrier running smooth.
Where should you use this cable?
You can use this cable in many places. The main use is in cable carriers. These are the plastic chains on the side of a machine. But it is also great for robotic arms. The wrist joint moves a lot. This cable handles the twist. It is perfect for CNC machine tools. The axis moves back and forth fast. It works in laser cutters. It works in filling systems. It works in press machinery. Even outside industry, it works in theater stages. Lights move up and down. This cable handles the vertical motion. It is also good for wind turbine loops. It handles slow, constant rotation. If it moves, this cable works.
Technical Specifications You Can Trust
We believe in transparency. Here are the real numbers for this cable:
- Brand Origin: Japan HANSHIN Electric Wire & Cable
- Conductor: Tinned fine-stranded oxygen-free copper (OFC)
- Core Count: 20 Cores (10 Twisted Pairs)
- Cross Section: 0.15 mm² (Approx 26 AWG)
- Shielding: Aluminum Foil + Tinned Copper Braid
- Insulation: Special High-Flex PVC or TPE
- Jacket: Oil-resistant PVC or Abrasion-resistant PUR
- Voltage Rating: 300V / 300V (Low voltage circuits)
- Bending Cycles: Up to 10 Million cycles
- Temperature: -30°C to +80°C (Flexing) / -40°C to +90°C (Fixed)
- Outer Diameter: Custom depending on jacket, but very slim for 20 cores
- Standards: RoHS Compliant, UL Style (UL20276 / UL2464)
Why choose HANSHIN over others?
You see many “drag chain cables” on Alibaba or Amazon. Some are cheap. But they fail fast. A cheap cable might handle 1 million bends. HANSHIN handles 10 million or 20 million. That is a huge difference. A cheap cable might use recycled copper. HANSHIN uses 99.99% pure oxygen-free copper. The stranding is tighter. The pitch length is optimized. This stops the “birdcage” effect where wires splay out. HANSHIN has strict quality control. They make cables for robots. Robots do not forgive mistakes. You get consistency. Every meter is the same high quality. You do not get one good batch and one bad batch.
How to install it right
Even the best cable fails if installed wrong. Keep the cable relaxed. Do not pull it too tight. Let it sit in the middle of the chain. Use the right radius. If the cable is too stiff, it breaks. This cable is very flexible. But do not step on it. Do not crush it with heavy tools. When you strip the end, be careful. Do not cut the shield too deep. Use proper strain relief. Keep the twist as close to the connector as possible. This stops the signal from leaking out. If you follow these simple rules, this cable will last for years. It will outlast the machine it is inside.
Frequently Asked Questions
Can I use this for servo motors?Yes. It is perfect for servo encoder feedback. The shielding stops the noise from the power cables next to it.Is it oil proof?Yes. The jacket resists oil and coolant. It is great for machining centers.How long is the roll?We usually sell 100-meter rolls. But we can cut it to your length. 1 meter, 5 meters, whatever you need.Does it work in cold storage?It works down to -30°C. For colder, we can use special silicone jackets.What is the price?It costs more than a standard wire. But it costs less than the downtime of your factory. It is an investment in reliability.
Ready to stop the downtime?
You have a problem with cable failure. We have the solution. Do not gamble with cheap wires. Use the cable that Japanese engineers trust for their own robots. This 20-core 0.15mm² twisted pair shielded cable is in stock. We can ship it to your country fast. We offer samples. Test it on one machine. Bend it 10 million times. See if it breaks. We are sure it will not.Contact us today. Send us your inquiry. Tell us how many meters you need. Ask for the datasheet. Let us give you a price that beats the big brands but keeps the quality high. Your machines deserve the best. Click the “Get a Quote” button now. Let’s fix your cable problems forever.