Stop Fighting With Stiff Cables That Break and Fail
You know the frustration. You are installing a new sensor system in a tight robotic arm or a packing machine. The cable is too stiff. It will not bend around the corner. You force it, and the insulation cracks. Or maybe the cable gets near oil or grease, and the jacket gets sticky and falls apart. Worst of all, electrical noise from nearby motors messes up your signal. Your data gets errors. Your machine stops. You lose money.You need a cable that moves like a snake, resists oil, and keeps signals clean. You need the TACHII 20-core twisted pair shielded cable. It is built in Japan for the toughest jobs. It is soft, tough, and ready to work.
What Makes This Cable Special?
This is not just a standard wire. It is a high-performance solution for complex machinery. We use a specific construction method called “twisted pair.” This means two wires twist around each other. Why? Because it cancels out electrical noise. If you have 20 cores, you have 10 pairs. This keeps your signals safe from interference (EMI/RFI).The “shield” is a metal layer around the wires. It acts like a guard. It stops outside noise from getting in. It also stops your signals from leaking out. We use a tin-plated copper braid for the shield. Tin-plating stops corrosion. It is crucial if the cable is in a wet or humid place.The jacket is special, too. It is oil-resistant. In factories, hydraulic oil and grease are everywhere. Normal PVC gets soft and swells. This jacket stays strong. It also resists abrasion. If the cable rubs against metal, it does not wear out fast.
Technical Specifications You Can Trust
We believe in being clear. Here are the hard numbers for this cable. You can compare these to your current supplier.
- Brand: TACHII
- Origin: Made in Japan
- Conductor Material: Bare copper (tin-plated available on request)
- Conductor Size: 0.2 sq mm (approx. 24AWG – 23AWG range)
- Number of Cores: 20 Cores (10 Pairs)
- Structure: Twisted Pair, Shielded
- Shielding Type: Copper braid or foil tape (coverage > 85%)
- Insulation Material: PVC or special soft elastic material
- Jacket Material: Oil-resistant PVC or PUR
- Outer Diameter: Approx. 6.0mm – 7.5mm (depends on jacket thickness)
- Rated Voltage: 300V / 500V
- Temperature Range: -20°C to +80°C (flexible) / -40°C to +105°C (fixed)
- Bending Radius: 6x to 10x diameter (very flexible)
- Certifications: RoHS, UL (or JIS equivalent), ISO9001
Where Should You Use This Cable?
This cable is for places where space is tight and reliability is a must. It is perfect for “drag chains” in robots. It moves back and forth millions of times without breaking.Here are the best places to use it:
- Industrial Robotics: Connecting servo motors and encoders. The cable needs to twist and turn with the arm.
- CNC Machines: Wiring control panels to the spindle and tool changers.
- Sensor Networks: In factories, you have many sensors (temperature, pressure, proximity). This 20-core cable carries all data in one go.
- Audio/Video Broadcast: For professional mobile racks. The shielding stops hum and buzz.
- Marine and Automotive: Where oil and vibration are big problems. The tin-plating stops salt water corrosion.
- Packaging Machinery: Conveyor belts need cables that flex constantly.
Why “Made in Japan” Matters for Quality
You might find cheaper cables from other places. But “Made in Japan” means something specific. It means strict quality control.In the factory, every batch is tested. They check the copper purity. They check the twist rate. They check the shield coverage. If a roll is not perfect, it gets rejected. This is why Japanese cables last longer. They do not have “weak spots.”The drawing process for the copper is precise. The stranding machine twists the wires evenly. This ensures the cable is balanced. It does not kink or tangle. When you pull it through a conduit, it slides smoothly.
Softness and Flexibility: The “No-Kink” Promise
The biggest pain point is stiffness. A stiff cable is hard to install. It takes two people to pull it. It breaks if you bend it too sharp.Our TACHII cable uses a special annealing process. This makes the copper soft but strong. The jacket uses a special plastic mix. It stays rubbery even in cold rooms. You can bend it around a small radius (like the size of a soda can) without damaging the wires inside.For you, this means:
- Faster installation time.
- One person can do the job.
- No damaged goods during shipping or fitting.
Oil and Chemical Resistance Explained
“Oil-resistant” is not just a buzzword. We test this. We soak the cable in ISO 1817 standard oil. We heat it up. We check if the weight changes or if the jacket gets hard.This cable resists:
- Hydraulic oil
- Lubricating grease
- Cutting fluids (coolants)
- Diesel and gasoline
- Cleaning solvents
If you work in a metal shop or a chemical plant, this is the cable for you. It will not get “mushy” or crack after a month of exposure.
How to Order and Customize
We know every project is different. Maybe you need a different color jacket for safety coding (like yellow or orange). Maybe you need a longer length than standard 100m rolls. Maybe you need a special connector on the end.We can do it. We offer OEM and ODM services. You can send us your sample. We will match it exactly.Standard Packaging:
- Coils or Drums
- Cartons with pallets
- Lengths: 100m, 200m, or custom cut lengths
Lead Time:
- Samples: 3-7 days
- Mass production: 10-20 days (depending on quantity)
We accept T/T (bank transfer) and L/C (Letter of Credit) at sight. Your payment is safe. We use trade assurance services. If the goods are late or bad quality, you get a refund.
Don’t Wait for a Breakdown
Bad cables cost you more than the price of the wire. They cost you downtime. They cost you repair labor. They cost your reputation with your client.Switch to a cable that works right the first time. The TACHII 20-core 0.2 sq mm cable is the upgrade your machines need. It is soft, it is shielded, and it fights oil damage.Ready to test it?Send us an inquiry today. Ask for a free sample. Tell us your specific needs. Let us prove that Japanese quality makes a difference in your factory. Click the “Send Inquiry” button now. Let’s get a quote to you within 24 hours.