Stop Losing Money on Downtime. Get the Real Japanese Tsubakimoto TM10E10 Gearbox.
Do you have a conveyor belt that stopped moving? Is your automatic gate stuck halfway? Or maybe your packaging machine is making weird noises? You need a part that works right now. You do not have time to wait for cheap copies that break in a month.
We have the Tsubakimoto TM10E10A and TM10E10B in stock. These are real Japanese imports. They are not knock-offs. They are worm gear reducers built for heavy work. We know you need a 1:10 ratio to get the speed just right. We can ship these to you fast. Ask for a quote today. Let us fix your machine so you can get back to work.
What is the TM10E10 Worm Gearbox?
This is a small but strong power tool. It is a right-angle gearbox. This means the input shaft and the output shaft are at 90 degrees. It saves space. You do not need a big area to install it. It turns the high speed of your motor into high torque.
The Tsubakimoto brand is famous in Japan. They have been making these for a long time. The TM10E10 model is a worm gear reducer. It uses a screw-like gear (the worm) to turn a wheel (the worm wheel). This creates a lot of force in a small package. It is perfect for tight spots in your factory.
Key Technical Specs (Data You Need)
We know you need numbers to make a decision. Here is the breakdown for the TM10E10 series:
- Brand: Tsubakimoto (Japan Original)
- Model: TM10E10A / TM10E10B
- Type: Worm Gear Reducer / Gearbox
- Gear Ratio: 1:10 (This is the standard speed reduction)
- Housing Material: Aluminum Alloy (Light but strong)
- Shaft Configuration: Hollow Bore or Solid Shaft (Check your old part)
- Mounting: Flange Mount or Foot Mount
- Efficiency: Around 65% to 70% (Typical for worm gears)
- Protection Level: IP65 (Dust and water resistant)
- Input Power: Usually fits servo motors up to 200W – 400W
- Output Torque: Approx 28 N.m to 35 N.m (Depending on the exact sub-model)
- Backlash: Low (Good for precise positioning)
- Operating Temp: -10°C to +80°C
Why Choose a 1:10 Ratio?
Why do you need exactly 1:10? Most motors spin too fast. They spin at 1000 or 2000 RPM. Your machine does not need that speed. It needs power.
When you use a 1:10 worm gear reducer, you cut the speed by ten. But you multiply the torque by ten. It gives you the “muscle” to move heavy loads.
- Scenario 1: Conveyor Belts. You need the belt to move steady. Not too fast. Not too slow. The 1:10 ratio gives you that control.
- Scenario 2: Lifting Gates. You need safety. Worm gears have a “self-locking” feature. If the power cuts, the gate stays up. It does not fall. This is critical for safety.
- Scenario 3: Packaging Machines. You need to stop exactly at the right spot. The low backlash of the Tsubakimoto TM10E10 helps you position things correctly.
Tsubakimoto Quality vs. Cheap Copies
You see cheap gearboxes online for $50. Do not buy them. They use soft metal. The gears wear out in 6 months. Then your machine breaks. You lose more money than you saved.
Tsubakimoto uses special steel. They heat-treat the gears. This makes them hard. They do not strip. They do not break.
- Real Japanese Engineering: The tolerance is tight. The parts fit perfectly.
- Long Life: These units run for years without oil changes (if sealed).
- Quiet Operation: The grinding is precise. It hums, it does not scream.
- Sealed for Life: The grease inside does not leak out. Dust does not get in. It works in dirty warehouses.
Where to Use This Gearbox?
This worm gear reducer fits many machines. We sell these to the US, UK, and Australia. Here is where we see them used:
- Automatic Doors & Gates: The right angle fits perfectly in the door frame.
- Small Conveyors: For moving boxes or bottles in a factory.
- Elevator Door Motors: For smooth opening and closing.
- Medical Equipment: Where space is small and reliability is a must.
- Solar Trackers: To move heavy solar panels slowly to follow the sun.
- Packaging Machinery: For sealing and cutting operations.
- Agitators: For mixing tanks in chemical or food plants.
If you have a machine that needs a right-angle drive, this is the part.
Installation and Maintenance Tips
You want this to be easy. It is.
- Mounting: Bolts go into the flange. Make sure the holes line up. Do not force it.
- Alignment: Connect the motor shaft to the input. Use a coupler. Keep it straight. If it is crooked, the gearbox will vibrate.
- Lubrication: Most TM10E10 units come pre-filled with synthetic grease. You do not need to add oil. It is maintenance-free.
- Direction: Check the arrow on the housing. Worm gears usually only turn one way (input to output). Do not try to force the output shaft to drive the motor. It will lock up.
Why Buy From Us?
We are not just a trading company. We understand machinery. We know that when your line stops, you lose money every minute.
- Fast Shipping: We ship from our warehouse. No long wait from Japan.
- Genuine Parts: We guarantee it is a real Tsubakimoto. Not a fake.
- Technical Support: If you are not sure if this fits your motor, send us a photo. We will check the shaft size and flange dimensions for you.
- Bulk Pricing: If you need 10 or 50 units for a project, we give you a better price.
- Global Reach: We ship to the USA, Europe, and Asia. We handle the customs paperwork.
Get Your Quote Now
Do not guess. Do not risk your machine with a cheap part. Get the Tsubakimoto TM10E10A or TM10E10B. It is the right choice for reliability.
Send us your inquiry now. Tell us:
- How many units you need.
- Your shipping address (Zip code/Postcode).
- If you need the A or B version (or if you are not sure, just ask).
We will reply within 24 hours with the price and shipping cost. Let’s keep your factory running.
[Inquiry Now] | [Download Datasheet] | [Contact Sales]