Stop Signal Loss and Interference Right Now
You have a big problem. Your equipment is expensive. Your projects are high-tech. But your cables are letting you down. You see noise in the data. The signal drops. The machine stops working because of interference. We know this hurts your business. We know you need a cable that works perfectly, every single time.
We make the Imported silver-plated 10-core shielded signal cable. It is built for engineers who hate problems. It solves EMI issues. It handles weak signals with care. We use high-purity oxygen-free copper. We plate it with real silver. This gives you the best conductivity possible. The structure is special: 4 independent shielded 0.15 square millimeter cores inside a main cable with 60.25 + 40.15 configuration.
Do you need reliable wiring for aerospace, medical gear, or high-end audio? We have it in stock. We can cut it to your length. We strip the ends if you need it. Send us your drawing. We will match it exactly. Ask for a quote today. Let us fix your signal issues forever.
What Makes This Cable Special?
The “Silver-Plated” Advantage
Why do we use silver? Copper is good. But silver is better. Silver has lower resistance. This means less heat. It means the signal travels faster. Our cable uses silver-plated copper clad steel or silver-plated oxygen-free copper. It depends on your need. The silver coating stops oxidation. The cable stays shiny and conductive for years. It is perfect for high-frequency signal transmission. You get clear data. No ghosting. No lag.
Shielding That Actually Works
Interference is everywhere. Motors, radios, and power lines create noise. Our cable fights back. We use a double-shield system. First, we wrap the small cores in aluminum foil or copper mesh. This is the “independent shielded” part. It protects the sensitive 0.15mm² wires. Then, we add a main braid shield around the whole cable. This cover is usually 85% to 95% coverage. It blocks EMI and RFI. Your signal stays clean inside the wire. It does not leak out. Outside noise does not get in.
The Perfect Structure: 6*0.25 + 4*0.15
This is not just a random number. This structure is smart. You get 6 bigger wires (0.25mm²). These carry power or main data. You also get 4 smaller wires (0.15mm²). These are for sensitive signals or control loops. Because they are independent shielded, they do not mess up the big wires. You can send power and data in one cable. This saves space. It saves weight. It makes installation easy. The outer jacket is FEP (Fluorinated Ethylene Propylene) or PTFE (Teflon). These materials resist heat, oil, and chemicals.
Technical Specifications You Can Trust
We do not hide details. Here is exactly what you get. We build to military and industrial standards.
- Product Name: 10-Core Shielded Signal Cable with Independent Shielding
- Conductor Material: Silver-plated Copper (OFC or CCS available)
- Conductor Size: 6 cores of 0.25 mm² + 4 cores of 0.15 mm²
- Insulation Material: PTFE / FEP / PVC (Depends on temperature need)
- Shielding: Aluminum Foil + Tinned Copper Braid (85% min coverage)
- Outer Jacket: PVC, LSZH (Low Smoke Zero Halogen), or FEP
- Voltage Rating: 300V / 600V (Check specific model)
- Temperature Range: -50°C to +200°C (For FEP/PTFE types)
- Impedance: 50 Ohm or 75 Ohm (Customizable)
- Capacitance: Low capacitance for high-speed data
- Outer Diameter: Approx 5.5mm to 8.0mm (Depends on jacket thickness)
- Color: Black, White, Grey, or Custom
- Length: 100m, 305m drums, or custom cut lengths
- Certifications: CE, ISO, RoHS, UL, REACH compliant
Where Do You Use This Cable?
Industrial Automation and Robotics
Factories are noisy places. VFDs (Variable Frequency Drives) create huge interference. Standard cables fail here. Our silver-plated shielded cable connects your PLC to the sensors. It connects servo motors to controllers. The independent shields protect the low-voltage control signals from the high-power motor noise. You get zero downtime. The cable resists oil and bending. It works in drag chains.
Medical and Laboratory Equipment
Precision is life in medicine. You cannot have noise in an MRI machine or a patient monitor. Our cable is perfect for medical monitoring equipment connections. It is biocompatible (if using the right jacket). It is easy to sterilize. The silver plating is anti-bacterial. The small 0.15mm² cores are great for tiny sensors. The shielding ensures the heart monitor reads the beat, not the room lights.
Aerospace and Defense
Weight matters in the sky. Our cable is light but tough. It meets MIL-W-16878 or similar specs. It handles the vibration of a jet engine. It works in extreme cold at high altitude. It is used in aviation systems and communication radios. The FEP jacket does not burn easily. It meets fire safety standards for aircraft.
High-End Audio and Broadcasting
Audiophiles want pure sound. Our silver-plated single conductor cables are used in high-end studios. They connect microphones to preamps. The shielding stops radio stations from bleeding into the recording. The silver gives a “brighter” sound with more detail. It is also used in 5G base stations and radar systems where signal loss is not an option.
Why Buy From Us? We Are Your Factory, Not Just a Trader
You can buy from a distributor. But why pay more? We are the factory. We make the wire. We draw the copper. We plate the silver. We twist the braid. We extrude the jacket.
Quality You Can See
We test every batch. We check the shielding coverage with a sweep test. We check the conductor resistance to make sure it is low. We do a Hi-Pot test (High Potential) to ensure no shorts. We burn the jacket to test flame retardancy. If it does not pass, we do not ship it. We have a zero-defect policy.
Customization is Our Superpower
Need a special color? We can do it. Need a special connector? We can crimp it. Need a printed logo on the jacket? Done. Need Teflon high temperature silver-plated wire for a furnace? We have the extrusion line for it. Need a 2-conductor shielded cable version instead of 10? We can make the tooling fast.
Fast Delivery and Global Shipping
We know projects have deadlines. We keep popular specs in stock. We can ship within 3 days for standard items. For big orders, we ship by sea or air. We handle the paperwork. We do DDP (Delivered Duty Paid) to your door if you want. We have shipped to the USA, Europe, and the Middle East for 10 years.
How to Order and Get a Sample
Do not guess. Do not buy a cheap cable that will break your machine. Buy the best value for your money. Our price is competitive because we are the source.
Step 1: Send us your inquiry. Tell us the core size (0.15mm²), the number of cores (10), and the shielding need.
Step 2: Tell us the jacket material. Do you need PVC for indoor use? Or FEP for high heat?
Step 3: Tell us the length and quantity. Are you building a prototype (small qty) or mass production (pallets)?
Special Offer: We offer free samples for qualified buyers. You pay for shipping. We send you a 1-meter piece. You test it in your lab. You pull it. You bend it. You measure it. If you like it, you order.
Click the “Contact Us” button. Email our sales team. We reply within 12 hours. Let’s build something great together. Get your Imported silver-plated 10-core shielded signal cable quote today. Your equipment deserves the best wire.