Imported German Igus CF140.15.07 7-Core 1.5mm² Shielded Drag Chain Cable – The Ultimate Solution for Your Moving Machinery
Do you have a problem with cables breaking in your moving machines? Do you hate stopping your production line just to replace a wire? We know this pain. Your machines run fast. They move back and forth thousands of times. A bad cable will crack, stop your robot, and cost you money. We have the fix. We offer the Imported German Igus drag chain cable 7G1.5 oil-resistant CF140.15.07. This is not a cheap copy. This is a real German engineering solution. It is built to last. It bends millions of times without failing. Read on to see why this is the best cable for your CNC, robot, or automated warehouse.
Why Your Current Cable is Failing (And Why This One Works)
You might think all cables are the same. They are not. Standard cables are for walls. They sit still. Your cables move. They twist. They rub against the plastic chain. A normal PVC jacket will crack in a week. It gets hard. It breaks. Then your signal drops. Your machine stops.
The Igus Chainflex CF140.15.07 is different. It is a high-flexible control cable. It uses a special PUR (Polyurethane) outer jacket. This material is tough. It resists oil, coolant, and abrasion. It stays soft even when it is cold. Inside, you have 7 cores of 1.5mm² copper wire. Each core is stranded. This means it is made of many tiny wires, not one thick one. This allows the cable to bend easily without breaking the copper.
This specific model, CF140.15.07, is famous in the industry. It has passed millions of bend cycles in Igus labs. It is a shielded cable. This means it has a braided copper mesh around the inner wires. This mesh stops “noise” (EMI) from getting into your signal. If you have sensitive sensors or servo motors, you need this shield. It keeps your data clean.
Technical Specifications: What You Get
When you buy this cable, you get precision. Here are the exact specs for the 7-core 1.5 sq mm shielded German Igus drag chain cable:
- Brand: Igus (Made in Germany / Imported)
- Series: Chainflex CF140
- Model Number: CF140.15.07
- Core Count: 7 Cores (7G)
- Conductor Size: 1.5 mm² (approx. 14 AWG)
- Conductor Material: Bare copper, fine-stranded (Class 5/6)
- Insulation: PVC or special PVC blend (color-coded)
- Outer Sheath (Jacket): PUR (Polyurethane)
- Shielding: Copper braid shield (coverage > 85%)
- Voltage Rating: 600V / 1000V (flexible use)
- Temperature Range: -40°C to +80°C (fixed) / -5°C to +70°C (moving)
- Bending Radius: 8x to 10x cable diameter (dynamic)
- Oil Resistance: Yes (resists mineral oils, grease, and coolants)
- Flame Retardant: Yes (self-extinguishing)
- Certifications: UL, CSA, CE, VDE
This cable is RoHS compliant. It is safe for the environment. It is also halogen-free in many variants, which means it does not produce toxic smoke if it burns.
Real-World Use Cases: Where to Use It
You need a German high-flexibility cable for tough jobs. Here is where the CF140.15.07 shines:
- CNC Machines: Use it for axis control. The machine moves fast. The cable needs to keep up.
- Robotic Arms: The wrist of a robot twists 360 degrees. This cable handles that torque.
- Automated Warehouses: Conveyor belts move all day. Cables get dragged. This one resists abrasion.
- Servo Motors and Drives: Send power and feedback signals without interference. The shield stops the motor noise from messing up the data.
- Packaging Machines: These machines have small, tight spaces. The 7G1.5 cable is thin enough to fit but strong enough to last.
- Outdoor or Wet Environments: The PUR jacket keeps water and dirt out.
If you are building a machine that moves, you need a flexible drag chain cable. Do not use a standard power cord. It will fail. Use the right tool for the job.
The “CF140” Advantage: More Than Just a Wire
The Igus CF140 series is a legend. Why? Because of the testing. Igus tests their cables in their own labs. They bend them. They pull them. They drag them over sharp edges. The CF140.15.07 is designed for “dynamic” applications. This means it is for moving parts.
Compare this to a static cable. A static cable is stiff. If you bend it 100 times, it might break. The Igus CF140 can bend 10 million times. That is a huge difference.
The shielding is also key. In a factory, you have big motors, welders, and VFDs. These create electromagnetic noise. If your signal cable is not shielded, your sensor might read “1” when it should be “0”. This causes errors. The copper braid on this 7-core shielded cable acts like a cage. It blocks the noise. Your signals stay accurate.
Also, the oil resistance is critical. In a factory, floors get oily. Cables sit in oil. Cheap PVC gets sticky and soft. It swells up. PUR does not. PUR stays tough. It wipes clean easily.
Installation and Handling Tips
You want this cable to last 10 years? Follow these simple rules. Even the best German drag chain cable will fail if you install it wrong.
- Check the Bending Radius: Do not bend the cable too sharp. Keep the bend radius at least 8 times the cable diameter. If you bend it too tight, you stress the copper strands.
- Use Cable Clamps: Inside the drag chain, use the right cable clips (CFX series). Do not let the cable twist. The cable should lay flat.
- Avoid Tension: Do not pull the cable tight. It should hang loose inside the chain. The chain carries the weight, not the cable.
- Match the Pair: If you are replacing an old cable, check the outer diameter (OD). The CF140.15.07 has a specific OD. Make sure your chain has enough space.
We can supply the cable by the meter or by the spool. We can also help you find the matching Igus cable clamps and connectors.
Frequently Asked Questions (FAQ)
Is this cable really from Germany?
Yes. We import directly from Igus Germany or their authorized global hubs. You get the genuine “Made in Germany” quality. It is not a cheap copy from other markets.
Can I use this for power and signal in one cable?
Yes, but be careful. This is a control cable. For high power (like 480V main lines), you might need a thicker conductor or a specific power cable like the CF130 or CF30 series. However, for 24V or 110V control power and signals mixed, this 7-core cable is perfect.
How long is the warranty?
Igus cables come with a standard warranty against defects. But honestly, if you install it right, it will outlast your machine. We have seen these cables run for 5+ years in harsh conditions.
Do you have the connectors for this cable?
Yes. We supply the full system. We have Igus connectors, gland fittings, and strain reliefs that fit the CF140 series perfectly. This saves you time hunting for parts.
What is the price compared to local brands?
Yes, it costs more than a generic Chinese cable. But think about the total cost. A cheap cable breaks. You pay for labor to fix it. You lose production time. The Igus CF140 costs more upfront but saves you money in the long run. It is an investment in reliability.
Get Your Quote Today
Stop dealing with cable failures. Your machines are too expensive to stop for a $50 wire. Upgrade to the Imported 7-core 1.5 sq mm shielded German Igus drag chain cable 7G1.5 oil-resistant CF140.15.07.
We are a factory-direct supplier. We can cut this cable to the exact length you need. We ship worldwide. We offer competitive pricing for bulk orders.
Send us an inquiry now. Tell us your length, your voltage needs, and your quantity. We will send you a quote within 24 hours. Let us help you build a machine that never stops.
Click “Contact Supplier” or email us directly. Let’s get your production line moving smoothly with the best cable in the world.