Stop Losing Money on Downtime. Get the Exact Servo Extension Cable You Need.
You run a factory. You know that when a machine stops, you lose money. You are looking for a specific cable: a Disassembled Japanese imported HRS 26-pin connector or an OMRON 9-pin connector XM2S-09 servo driver extension cable. You need it to work perfectly, right now. You don’t want a cheap copy that fails in a week. You need a cable that fits your Omron servo driver or HRS system exactly. We build these cables. We use real Japanese connectors and high-quality wire. We can make them exactly to your drawing. We ship fast. Ask us for a quote today. Let’s fix your machine.
What Makes Our Cables Different?
Most cables online are cheap copies. They use soft plastic that cracks. The pins corrode. The signal gets noise. This causes errors in your CNC or robot. Our cables are different. We use genuine Omron and HRS parts. We build industrial automation cables that last.
We know you need durable servo extension cables. Your factory has oil, heat, and movement. A standard wire will break. We use flexible PVC or PUR jackets. They resist oil and bending. We add good shielding. This stops noise from motors. Your signals stay clean. Your machine runs smooth. We also offer custom wire harness assembly. You tell us the pinout. We build it. No mistakes.
Technical Specs You Can Trust
You need numbers. Here is what we offer for the XM2S-09 and HRS 26-pin series.
H5: Connector Details
- Brand: Omron (Japan) / HRS (Hirose Electric)
- Model: XM2S-09 (9-pin) / HRS-26 (26-pin)
- Housing Material: PBT or Phenolic Resin. High heat resistance.
- Contact Material: Phosphor Bronze. Gold plating. Low resistance.
- Lock Type: Spring-lock or Screw-lock. Secure fit. No vibration loose.
H5: Cable Performance
- Conductor: Tinned Copper. 28AWG to 20AWG. Flexible.
- Insulation: PVC or PE. Color-coded. Easy to check.
- Shielding: Aluminum Foil + Braid. 85% coverage. Stops EMI.
- Voltage: 300V / 500V. Safe for servo power.
- Temperature: -20°C to +80°C (PVC) or +105°C (PUR).
- Bend Life: 5 million cycles. Good for moving parts.
- Certifications: UL, SGS, CE, RoHS, REACH. Safe for export.
Where Do You Use These Cables?
You don’t just buy a cable. You buy a solution for a machine. These cables are for high-precision industrial control.
H5: CNC Machines and Lathes
Your CNC uses servo motors. The servo driver extension cable connects the motor to the controller. If the cable is bad, the axis drifts. You get scrap parts. Our cable keeps the feedback signal strong. Your cuts stay accurate.
H5: Industrial Robots
Robots move fast. The robot arm encoder cable takes a lot of stress. It twists and turns. We use high-flex cable. It does not snap. We also do break-away sensor cables. If the arm hits something, the cable unplugs safely. It saves the expensive port.
H5: Packaging and Printing
Packaging machines run 24/7. They need MIL-spec connectors like the XG4A series. These are rugged. They lock tight. We can make D-Sub cable assemblies for older PLCs too. We replace old wires that crack.
H5: Automotive and Semiconductor
Factories making chips or cars need zero errors. They use HRS 26-pin waterproof connectors. We make these with IP67 ratings. Dust and water do not get in. We also do OBD diagnostic harnesses. We test every wire for continuity.
How We Build Your Cable (Step by Step)
You might worry about quality. Here is our process. It is simple but strict.
First, we check the connector housing. We look for cracks. We make sure the latch works. For the spring-type locking mechanism, we test the force. It must hold the plug tight. But it must not be too hard to unplug.
Second, we prep the wire. We strip the ends. We tin the copper. This stops fraying. We twist the strands tight. This is key for vibration resistance.
Third, we crimp the terminals. We use real Japanese tools. The crimp height is perfect. Too loose and it heats up. Too tight and it breaks. We pull-test every wire. It must hold 5kg to 10kg force.
Fourth, we insert pins. We follow the pin assignment diagram exactly. Pin 1 goes to Pin 1. We do not guess. For RS-232 to RS-422 converter cables, we cross the TX/RX lines correctly.
Fifth, we mold or assemble. We put the wire into the hood. We click the lock. For waterproof types, we add seals. We heat-shrink or overmold for strain relief.
Finally, we test. We do a Hi-Pot test (high voltage). We check for shorts. We check for opens. We send you a test report if you ask.
Why Buy From Us?
You have choices. You can buy from a big distributor. But they are slow. They charge high markups. You can buy cheap from Alibaba. But you get garbage.
We are a factory-direct cable assembly manufacturer. We have stock of Omron XM2S and HRS parts. We can assemble in 2 days. We do small batches (MOQ 10 pcs) or big runs (10k pcs).
We speak English. We understand “Pin 1 is Shield” or “Pin 5 is +24V”. We don’t make mistakes with encoder cable wiring. We know that swapping A+ and A- breaks the system. We double-check the color code.
Our price is fair. We are in China, so labor cost is low. But we use Japanese parts. You get Japan quality at China price. We ship by DHL or FedEx. You get it in 3 to 5 days.
Common Problems We Solve
H5: “My cable is too stiff.”
Standard PVC is hard. It kinks. We use flexible PUR cable. It moves like a snake. Great for robot arms.
H5: “I get noise errors.”
Shielding is bad. We use 2-layer shielding. Foil + Braid. We also ground the drain wire properly. No more ghost signals.
H5: “The connector is loose.”
Cheap copies have weak springs. We use genuine Omron latches. They click. They stay. Even with vibration.
H5: “I need a special length.”
Standard cables are 1m or 2m. You need 3.45m? We cut to length. We add ferrite cores if you need noise suppression.
Ready to Order?
Don’t wait for your machine to break. Get the right OMRON 9-pin connector XM2S-09 servo driver extension cable now.
Send us your drawing. Or send us the part number. Even if it is an old part. We can find it. We make custom wire harnesses for every industry.
Click “Contact Supplier” now. Tell us what you need. We will send a quote in 24 hours. We can send samples first. Test them. If they work, order more.
We are your partner for industrial connectivity. Let’s keep your factory running.