Stop Worrying About Power Failures. Get a Cable That Works Harder Than You Do.
You have a job to do. You need to connect equipment, power a machine, or fix a lighting system. The last thing you want is a cable that breaks, overheats, or causes signal loss. You need something strong. You need something reliable. And you need a price that makes sense for your budget.
We make power cables for export. We know what you need because we build it every day. This is not just a wire. It is a 2-core 2.5 square millimeter power cable. It carries electricity safely. It works for control signals too. Read this page. You will see why our 110 series coded cable is the right choice for your project.
What Exactly Is This 2-Core 2.5mm Cable?
Let’s keep it simple. This cable has two cores. Each core is 2.5 square millimeters thick. That is a standard size. It is not too thick. It is not too thin. It is just right for many jobs.
The “110 series” is our model code. It tells you about the structure. It has a strong outer jacket. Inside, you find two insulated wires. They are twisted or laid parallel. We use high-quality copper. Copper conducts electricity well. It does not get hot easily.
We also call this a “coded cable.” This means we print codes on the jacket. You can see the type, the size, and the voltage. It helps you identify the cable later. You do not need to guess what is inside the wall.
Technical Specs You Can Trust
You need numbers. Here are the real specs for the 1119952 model:
- Conductor: Plain annealed copper wire. Soft and flexible.
- Cross-section: 2 x 2.5 mm².
- Insulation: PVC or XLPE. We can choose based on your need.
- Voltage: Rated for up to 450/750V. Safe for most low-voltage systems.
- Temperature: Works from -30°C to 80°C. It handles heat and cold.
- Color: Black or White. Custom colors are available.
- Length: 100 meters, 500 meters, or custom cuts.
- Certification: ISO, CE, RoHS compliant. Ready for export to the US, UK, or EU.
These numbers matter. A 2.5mm wire can handle about 20 Amps of current. That is enough for heavy-duty lighting or small motors. If you use a smaller wire, it will melt. Ours is built to the exact size. No cheating on the copper thickness.
Where Can You Use This Cable?
This cable is not for one thing. It is for many things. Here are the best places to use it:
For Construction and Building Sites
You need power on a job site. You use it for temporary lighting. You use it for power tools. The ground is rough. Rocks and mud are everywhere. Our cable jacket is tough. It resists abrasion. It does not crack when you drag it over concrete.
For Industrial Control Panels
Factories have machines. Machines need power and signals. This 2-core cable does both. It sends power to the motor. It sends a control signal back to the computer. It keeps the factory running. The “coded” marking helps electricians fix wires fast. They do not waste time tracing lines.
For Outdoor and Landscape Lighting
You bury cables in the ground. Moisture is the enemy. Our insulation blocks water. The copper does not corrode easily. You can use this for garden lights, street lamps, or security cameras. It stands up to rain and UV rays from the sun.
For Audio and Data (Low Voltage)
Sometimes you need a shielded cable. We can add a foil shield. This stops interference. It is good for audio systems or weak signal controls. It keeps the signal clean. No buzzing noise. No data errors.
Why Our Cable Beats the Competition
You can buy cheap cables anywhere. But cheap cables cost you more later. Why? Because they fail.
Real Copper, Not Junk
Some sellers use CCA (Copper Clad Aluminum). It looks like copper. But it breaks easily. It heats up fast. We use 99.9% pure copper. It is heavier. It is stronger. It lasts 10 years longer.
Honest Thickness
A 2.5mm cable must be 2.5mm. Some factories make it 2.3mm to save money. We measure every batch. You get exactly what you pay for. Our quality control is strict. We test every 100 meters.
Flexible in Cold Weather
Cheap PVC gets hard like a rock in winter. If you bend it, it snaps. Our material stays soft. You can install it in freezing weather without breaking it. This saves you time and waste.
Print That Lasts
The “coded” print on our cable does not rub off. You can still read it after installation. This is important for safety checks later.
How We Help You Save Money and Time
We are a factory. We do not have a middleman. You talk directly to us. This cuts the price.
Custom Lengths
Do not pay for 1000 meters if you only need 300. We cut to your exact length. We mark the meterage on the jacket every 1 meter. This helps your workers install it fast.
Fast Shipping
We know you are on a deadline. We pack the cables on strong wooden drums. They do not get tangled. We ship by sea or air. We handle the paperwork. You just wait for the delivery.
Samples First
Not sure? Ask for a sample. We send a short piece. You test it in your lab. You pull it. You bend it. If you like it, we start the big order.
OEM Service
Want your brand on the cable? We can do it. We print your logo on the jacket. We design the packaging box with your name. You look like a pro to your customers.
Don’t Wait. Get a Quote Today.
You have a project. You need cables now. Do not gamble with bad quality. Choose a partner who understands export. Choose a cable that works.
This 1119952 model is in stock. We can also make the 110 series exactly to your spec.
Send us an inquiry now. Tell us:
- How many meters you need.
- The voltage you need.
- If you need a black or white jacket.
We will reply within 12 hours. We give you the best price for a top-tier product. Let’s build something great together.
Click “Contact Supplier” now. Let’s get your power flowing.