Stop Wasting Money on Cheap Cables That Break. Get the Lapp 1119754 4×0.5mm2 Control Cable Direct from Factory.
Are you tired of control cables that crack, short out, or fail in tough environments? Do you need a reliable wire for your machinery, wind turbines, or building automation? We know your pain. You buy cheap cables, they break in a month, and your machines stop working. That costs you more than just the price of the wire.
We are a professional cable factory. We make the Lapp Olflex Classic 110 1119754 cable. It is not just a wire. It is a heavy-duty solution. We sell it to the world. You get factory prices. You get top quality. No middleman fees.
This is the 4 core 0.5 square millimeter pure copper core cable you need. It is flexible. It is strong. It lasts a long time. Read below to see why this is the best choice for your project.
What Exactly is the 1119754 Cable?
This cable is part of the famous Olflex Classic 110 series. It is a standard in the industry. When engineers see “Lapp,” they know it means quality. This specific model, 1119754, is a YY control cable. It has no shield. This makes it easier to install. It is perfect for general control and signal transmission.
It has 4 cores. Each core is 0.5 mm2. The material is bare copper. This means excellent conductivity. You do not lose power over distance. The outer jacket is PVC (Polyvinyl Chloride). It is gray (RAL 7001). This PVC is special. It resists oil. It resists chemicals. It is also flame retardant.
You can use this wire indoors. You can use it outdoors in dry or damp rooms. It handles mechanical stress well. If you need a cable for a conveyor belt, a CNC machine, or a sensor loop, this is it.
Technical Specs You Need to Know
We keep it simple. Here are the hard numbers for the 1119754:
- Manufacturer: LAPP GROUP (We are the distributor/factory source)
- Series: Olflex Classic 110
- Part Number: 1119754 (Also known as 812-4523 in some lists)
- Cores: 4 Cores (4 G / 4 x)
- Cross Section: 0.5 mm2 (AWG 20)
- Conductor: Bare Copper (Class 5 fine-wire stranding)
- Insulation: PVC (LAPP P8/1)
- Sheath: PVC (Gray RAL 7001)
- Voltage: 300/500 V
- Current Rating: 9 Amps (max)
- Temperature: -40°C to +80°C (Flexible use down to -5°C)
- Bending Radius: Fixed: 4x diameter | Moving: 10x diameter
- Oil Resistance: Yes (DIN EN 50290-2-22)
- Flame Test: IEC 60332-1-2
- Length: Usually 50 meters or 100 meters coils (Customizable)
- Shielding: Unshielded (UU)
This cable meets strict standards. It follows VDE rules. It matches the Low Voltage Directive (73/23/EEC). If you sell machines to Europe, this cable helps you pass inspection.
Why Choose 4 Core 0.5mm2 Copper?
Why do you need exactly 4 cores and 0.5 square mm? Let us break it down.
1. Perfect Size for Signals and Power
0.5 mm2 is the “sweet spot.” It is thick enough to carry power for small motors and sensors. It is thin enough to stay flexible. If you go thicker (like 1.0 mm2), the cable gets stiff. It is hard to pull through pipes. If you go thinner (like 0.25 mm2), it might overheat. 0.5 mm2 is just right for most industrial controls.
2. Pure Copper is King
Some cheap cables use Copper Clad Aluminum (CCA). Do not buy that. CCA breaks easily. It has high resistance. Our 1119754 uses pure copper. The resistance is only 39 Ω/km. This means less heat. More power reaches your device. It saves energy costs in the long run.
3. The 4-Core Advantage
You get 4 separate wires in one jacket. You can use 3 for power (3-phase or +/- DC) and 1 for ground. Or 2 for power and 2 for data signals. It saves space. You only need to pull one cable instead of four. This cuts your installation time in half.
Real-World Use Cases: Where Does This Cable Shine?
You might ask, “Where can I actually use this wire?” Here are the top scenarios.
Wind Turbines and Renewable Energy
The Olflex Classic 110 is famous in wind power. It is used for torque applications in the nacelle. It handles the twisting and vibration. It resists the oil and grease found in wind gearboxes. If you are building or fixing wind turbines, this is the standard cable.
Factory Automation and Robotics
In a factory, machines move. Cables get bent. The 1119754 is rated for “occasional bending.” It is perfect for robot arms, CNC machines, and assembly lines. The PVC jacket slides over surfaces without getting stuck. It does not snag on metal parts.
Building Management Systems (BMS)
You need to connect sensors for temperature, humidity, and light. You need to control relays. This cable is great for HVAC systems. It fits in cable trays and conduits easily. Since it is unshielded, you do not need special grounding for the shield. This makes installation faster for electricians.
Outdoor and Damp Environments
Water is the enemy of cables. The PVC sheath on the 1119754 is moisture-resistant. It uses non-hygroscopic fillers. This means it does not absorb water inside. You can use it in wet rooms, basements, or outdoor control boxes (with UV protection add-ons).
Quality That Beats the Competition
There are many “YY cables” on the market. Why is the Lapp 1119754 better?
1. Flame Retardant Safety
Safety comes first. If a fire starts, cheap cables burn fast and create toxic smoke. The Olflex Classic 110 passes IEC 60332-1-2. It does not spread fire easily. It produces low smoke. This is critical for public buildings, hospitals, and schools.
2. Oil and Chemical Proof
Workshops are dirty. There is oil, coolant, and cleaning fluid everywhere. Standard PVC gets soft and sticky in oil. The Lapp compound is special. It stays hard even in oil (TM54 standard). It will not crack if you spill hydraulic fluid on it.
3. Consistent Diameter
Cheap cables have bad tolerance. One meter is 5.0mm, the next is 6.0mm. This causes headaches when putting on cable glands. The 1119754 has a strict outer diameter of 5.7mm. It fits perfectly into standard glands (like SKINTOP MS). You get a tight, waterproof seal every time.
4. Cold Weather Performance
Some cables become like glass in winter. They shatter if you bend them. This cable works down to -40°C. It stays flexible in freezers and cold climates. You can install it in winter without heating it up first.
Buying Guide for Importers
You are a foreign trade buyer. You care about cost, logistics, and compliance. Here is what we offer:
Competitive Factory Pricing
We are the source. We do not just resell. We produce and export. You cut out the local distributor markup. For a 50m or 100m coil of 4×0.5mm2, we offer the best FOB or CIF price. Ask for a quote today. Compare our price with your current supplier. You will be surprised.
Global Shipping & Logistics
We ship worldwide. We know how to pack cables so they do not get crushed. We use strong coils and plastic wrapping. We handle the paperwork. We provide the Certificate of Origin (CO), Commercial Invoice, and Packing List. We help with CE certification questions.
Customization Options
Need a different length? Need black color instead of gray? Need printing on the jacket? We can do it. We also supply accessories. Do you need SKINTOP cable glands or HellermannTyton cable ties? We have them in stock. We can ship the cable and the fittings together. This saves you shipping costs.
Stock Availability
We keep high stock levels. The 1119754 is a fast-mover. You do not wait 30 days for production. We can ship within 3-7 days for small orders. For big projects (like 1000+ meters), we have priority production lines.
Don’t Risk Your Reputation with Bad Cables
Imagine you build a machine. It sells for 50,000.Yousave10 by using a cheap cable. That cable fails. The machine stops. Your client is angry. You lose the contract. You lose more than $10. You lose trust.
The Lapp Olflex Classic 110 1119754 protects your reputation. It is reliable. It is tested. It works the first time, every time. Your clients will see the “LAPP” print on the jacket. They will trust the quality.
We are ready to support your business. Whether you need one coil for a sample or a container for a big project, we treat you right.
Contact us now for a free quotation. Tell us your quantity and destination port. Let us show you why we are the best choice for industrial control cables.
Key Specs Recap for Quick Reference:
- Product: Olflex Classic 110 Control Cable
- Part No: 1119754
- Cores: 4 x 0.5 mm2
- Material: Bare Copper / PVC
- Voltage: 300/500V
- Feature: Oil resistant, Flame retardant, Flexible
- Application: Machinery, Wind power, Automation
Click “Send Inquiry” now. Let’s do business.