ÖLFLEX® CLASSIC 110 1119752: The Ultimate 2×0.5mm² Flexible Control Cable for Your Industrial Needs

Are you looking for a reliable power and signal cable that doesn’t let you down? Do you need a wire that handles constant movement in your machines but also stays tough in fixed installations? You are in the right place. We know that downtime costs money. A bad cable can stop your whole production line. That is why we offer the 1119752 Cable, 2-core 0.5 sq mm power cable/signal control cable. It is built for real-world use. It is flexible, strong, and easy to install. We are a factory direct supplier. We can give you the best price and the best quality. Contact us today for a quote. Let us solve your wiring problems.

What Exactly is the 1119752 Cable?

This cable is part of the famous ÖLFLEX® CLASSIC 110 family. It is a standard industrial cable used all over the world. The model number 1119752 tells you exactly what you get. It has 2 cores (wires inside). Each core has a cross-section of 0.5 square millimeters. The conductor is made of pure copper. This is not cheap aluminum. Copper gives you better power flow and less heat.

The cable uses a special 110 series technology. This means it works perfectly with 110 type connectors and patch panels. You do not need to solder. You just punch the wires in. It saves you hours of labor. The outer sheath is PVC (Polyvinyl Chloride). This material is gray (RAL 7001). It resists oil, acids, and alkalis. It is also flame retardant.

This is a multi-purpose cable. You can use it for power. You can also use it for control signals. It works in dry places. It also works in damp or wet rooms. If you use it outside, you just need a UV protection cover. It is a top choice for machine tools, conveyor systems, and plant engineering.

Technical Specifications You Can Trust

We believe in transparency. Here are the hard numbers for the 2×0.5 sq mm pure copper core cable. These specs ensure it meets international standards like VDE and EN.

• Product Model: 1119752 (ÖLFLEX® CLASSIC 110)
• Conductor Material: Bare Copper (Fine wire stranding, Class 5)
• Number of Cores: 2 Cores
• Cross-Section: 0.5 mm²
• Insulation Material: Special PVC Compound (P8/1 TI2)
• Sheath Material: PVC Compound (TM2)
• Color: Silver Grey (RAL 7001)
• Rated Voltage: 300/500 V (U0/U)
• Test Voltage: 4000 V AC
• Conductor Resistance: Max 39 Ohms/km (at 20°C)
• Current Rating: Approx 9 Amps (depending on installation)
• Temperature Range:
  • Fixed installation: -40°C to +80°C
  • Flexing: -5°C to +70°C
• Bending Radius:
  • Fixed: 4 times cable diameter (approx 19mm)
  • Flexing: 10 times cable diameter (approx 48mm)
• Oil Resistance: Limited (Standard PVC)
• Flame Retardancy: IEC 60332-1-2
• Length: Standard 50m or 100m coils (Custom lengths available)
• Compliance: RoHS, REACH, VDE approved

Why Choose 2-Core 0.5mm² Copper?

You might ask, why this specific size? The 2-core 0.5 sq mm size is the “sweet spot” for many applications. It is not too thick to bend easily. It is not too thin to carry power.

Perfect for Low Voltage Power
This cable handles up to 500 Volts. It is perfect for connecting sensors, actuators, and small motors. It powers your control circuits safely. The pure copper core ensures low voltage drop. This means your equipment gets the power it needs, even over long distances.

Excellent for Signal Transmission
Signals need a clean path. The copper core and the PVC insulation block interference. The 2×0.5mm structure is great for data lines in old 110 systems. It supports voice and basic data signals. It keeps your communication lines clear.

Flexibility is Key
The conductor is made of many thin copper wires twisted together (stranded). This is Class 5 flexibility. You can bend this cable around corners easily. It does not kink. It is great for torsion applications like wind turbine loops or moving robot arms. It resists breaking even after thousands of moves.

Where Can You Use This Cable?

This cable is everywhere in industry. It is a workhorse. Here are the top use cases for the 1119752 signal control cable:

Industrial Machinery
Use it in machine tools and CNC machines. Connect the control panel to the motor. It handles the signals and the power for the solenoids. It resists cooling oils and cutting fluids.

Conveyor and Production Lines
In conveyor systems, cables move with the belt. This cable handles the constant flexing. It connects sensors to the PLC (Programmable Logic Controller). It is tough enough for 24/7 operation.

Building and Plant Engineering
Use it for fixed wiring in walls and conduits. It is safe for indoor wiring in factories. It is also good for damp rooms like basements or washing stations.

Measurement and Control Tech
In data processing systems, you need reliable connections. This cable works with 110 patch panels. It is ideal for testing labs and measurement equipment racks.

Wind Turbines
The cable can handle the torsion inside the nacelle. It moves as the wind turns the blades. It is a cost-effective solution for internal wiring in Wind Turbines (WTG).

Installation Tips for Electricians

Installing this cable is fast. But you need to do it right to get the best life out of it.

Bending Rules
Never bend it too sharp. The minimum bending radius is important. For fixed wiring, don’t bend it tighter than 4 times the diameter (about 19mm). When moving, keep it at 10 times the diameter (about 48mm). If you bend it too much, you damage the copper strands inside.

Temperature Matters
Don’t install it when it is freezing. The minimum installation temperature is -20°C. If it is colder, the PVC gets brittle and might crack. Once installed, it works down to -40°C.

Stripping and Connecting
Use the right tools. Since this is for 110 series use, you likely use IDC (Insulation Displacement Connectors). The blade cuts through the PVC to touch the copper. Make sure you push the wire all the way in. The gray sheath strips easily with standard wire strippers.

Grounding
Always ground the cable properly. Even though it has a PVC sheath, a ground connection prevents static buildup and protects against electric shock.

Why Buy From Us?

We are not just a trader. We are a cable production enterprise doing foreign trade. We understand export. We know what you need for shipping and customs.

Factory Direct Price
Cut out the middleman. We make the cable in our factory. We give you the EXW or FOB price. You save money. Our price is competitive compared to other Chinese suppliers.

Quality Control
We test every batch. We check the conductor resistance. We check the insulation resistance. We do spark tests. We ensure the RoHS compliance. You get a certificate of conformity.

Global Shipping
We ship worldwide. Whether you are in Europe, North America, or Southeast Asia, we handle the logistics. We know the IEC standards and VDE standards. We know the UL standards for the US market if needed.

Customization
Need a different length? Need a different print on the sheath? We can do it. We can also source similar models like 1119752 equivalents if you need a specific brand match.

Get Your Quote Now

Don’t wait. Cable prices change with copper prices. Lock in your price today. We have stock of 1119752 ready to ship. We can also produce a new batch for you in 10 days.

Send us an inquiry now. Tell us your quantity. Tell us your port. We will reply within 24 hours with a detailed quotation. Let’s build a long-term business relationship. We are your reliable partner for power cables and control cables.

Key Features Recap:

• 2 Cores, 0.5mm² Pure Copper
• Flexible PVC Insulation & Sheath
• Rated 300/500V
• VDE & RoHS Approved
• Perfect for 110 Patch Panels
• Oil and Acid Resistant
• Ideal for Machinery & Automation

Click “Contact Supplier” or email us directly. Let’s talk about your next project.