Stop Wasting Money on Cables That Fail. We Have the Exact 1119203 You Need.
Do you run a factory? Do you fix heavy machines? If your cables break, your whole line stops. You lose money every minute. You need a cable that works hard and lasts long. You need the LAPP OLFLEX CLASSIC 110 1119203.
We are a factory direct supplier. We make this exact cable. We know the pain of downtime. We know you hate stiff cables that crack. We have the solution. This is not just a wire. It is a flexible power and signal control cable. It uses pure copper. It handles 300/500 volts easily.
Read this page. See why this 3-core, 1 square millimeter cable is the best choice for your control panels and machines. Then, send us an inquiry. We can cut it to length. We can ship it fast. Let’s fix your cable problems today.
What is the 1119203 Cable? (The Basic Facts)
This is a specific part number from LAPP. It is in the OLFLEX CLASSIC 110 series. It is a classic choice for industrial use. It is famous for being tough and flexible.
Here is the raw data. This is what you get when you buy 1119203:
- Part Number: 1119203 (Also known as 111-91-xxx series)
- Brand: LAPP (Lapp Kabel)
- Series: OLFLEX CLASSIC 110
- Cores: 3 Cores (3G)
- Cross Section: 1 mm² (1 square millimeter)
- American Wire Gauge: 17 AWG
- Conductor: Bare copper, stranded, class 5 flexible
- Insulation: PVC (Polyvinyl Chloride)
- Sheath: PVC, Grey color (RAL 7001)
- Shielding: Unshielded
- Grounding: Yes (Green/Yellow core)
- Rated Voltage: 300/500 V (U0/U)
- Test Voltage: 4000 V
- Outer Diameter: 6.0 mm
- Length: Standard 100 meters (We can cut this)
- Temperature Range: Fixed: -40°C to +80°C. Moving: -5°C to +70°C.
- Bending Radius: Fixed: 4x diameter. Moving: 10x diameter.
- Oil Resistance: Yes (DIN EN 50290-2-22)
- Flame Retardant: IEC 60332-1-2
Why Choose 1mm² 3-Core Copper?
You might ask, why this specific size? Why not bigger? Why not smaller?
1 mm² is the sweet spot. It is thick enough to carry power. It is thin enough to stay flexible.
The Copper Core Matters
We use pure electrolytic copper. Not aluminum. Not cheap mix. Pure copper means low resistance. The resistance is about 19.5 Ohms/km. This means less heat. More efficiency. Your machines get the power they need.
3 Cores for Control and Power
You have 3 cores. Usually, one is for ground (Green/Yellow). The other two carry the signal or power. This is perfect for simple control loops. It works for 24V signals. It works for 230V control power. It is the standard for push-buttons, sensors, and small motors.
Flexibility is Key
The conductor is made of many thin wires (stranded). This is Class 5 flexibility. You can bend it. You can pull it through pipes. It does not snap. It is much better than solid wire.
Where Can You Use This Cable? (Real World Scenes)
This cable is everywhere in industry. You will see it in:
Machine Tools and CNC
Does your factory have CNC machines? Use this cable for the control panel. It connects the computer to the motors. It handles the vibration. It resists the oil splashes.
Paint Shops and Wet Areas
This cable has a special PVC sheath. It resists water and chemicals. It is perfect for painting robots. It does not get sticky. It does not crack when wet.
Power Plants and Stations
Need a reliable cable for low voltage control? This is it. It is rated for 500V. It is flame retardant. If there is a fire, it does not spread the flame. This keeps your plant safe.
Freezing and Cooling Equipment
Do you work with cold storage? The sheath stays flexible at -40°C. It does not become brittle like cheap rubber cables.
Wind Turbines (WTG)
This cable is used inside the nacelle. It connects the cross-over regions. It handles the twisting motion. It lasts for years in harsh weather.
Office and Data Processing
It is also used in server racks and office automation for low voltage power distribution.
Technical Performance You Can Trust
We test our cables. We follow strict rules. Here is what the specs mean for you:
Voltage Safety
The rated voltage is 300/500V. But we test it at 4000V. This is a huge safety margin. You won’t get short circuits. You won’t get shocks.
Temperature Toughness
It works in freezing cold (-40°C). It works in hot factories (+80°C). It does not melt. It does not freeze and crack.
Bending Limits
Don’t bend it too sharp! The minimum bending radius is 4 times the diameter when fixed. That is 24mm. When moving, it is 10 times (60mm). If you bend it sharper, you damage the copper. Follow this rule, and it will last for millions of moves.
Chemical Resistance
Factories are dirty. There is oil, grease, and cleaning fluid. This PVC material resists them. It meets the TM54 standard for oil resistance.
Certifications
It has VDE registration number 7030. It meets CE requirements. It is ECA certified. You can use it in Europe, USA, and Asia without legal issues.
How to Order and Customize
We are not just a trader. We are a factory-style supplier. We can help you save cost.
Standard Package
The standard length is 100 meters per roll. It is packed in a coil. The outer diameter of the roll is manageable.
Cut to Length
Do you need 50 meters? 20 meters? 150 meters? We can cut it. We can put markers on the cable every meter if you need.
Connector Service
Do you need connectors on the ends? We can crimp ferrules. We can attach M12 or RJ45 connectors if you ask. This saves your workers time.
Color Options
The standard is Grey (RAL 7001). This is neutral and professional. If you need a different color for safety coding (like Blue or Red), ask us. We can do small runs.
Price and Lead Time
Because we produce in bulk, our price is competitive. We have stock for common sizes. For 1119203, we can ship within 3 days for small orders. Big orders take 2 weeks.
Frequently Asked Questions (FAQ)
Is this cable shielded?
No. The 1119203 is unshielded. If you need shielding for high noise areas, look at the 1119204 or 1119205 models. But for most motor controls and power, this is fine.
Can I use this outdoors?
Yes, but it needs UV protection if in direct sun. The standard Grey PVC is not UV stable forever. If it sits in the sun, put it in a conduit or use a UV-resistant black sheath version.
What is the difference between OLFLEX CLASSIC 110 and 100?
CLASSIC 110 is the improved version. It has better oil resistance. It has a tighter diameter. It is easier to strip. It is the modern standard. CLASSIC 100 is the older version.
Can I use this for audio?
Technically, yes. But it is not twisted pair. You might get noise. For audio or data, use a twisted pair cable like CAT5 or a bus cable.
Ready to Buy? Get a Quote Now.
You have the specs. You know the quality. You know it fits your machine.
Don’t wait for a breakdown. Stock up now.
Send us an inquiry today.
Tell us:
- The part number: 1119203
- The quantity (e.g., 500 meters, 10 rolls)
- The length you need per piece
- Your destination port
We will reply within 24 hours with a price including shipping. We accept T/T and L/C.
Click the “Contact Us” button. Let’s get your cables shipped. Your machines are waiting.