Stop Signal Loss and Power Failures in Your Machines
You run a business that depends on reliable electrical connections. You need cables that do not break, do not overheat, and carry signals clearly. If you are building control panels, connecting industrial robots, or setting up power supplies, you need a wire that bends easily but stays strong.
We make the 1119003 3-core 0.5 square millimeter power cable. It is part of the ÖLFLEX CLASSIC 110 series. This is not just a wire. It is a flexible, durable solution for power and signal control. We use pure copper and high-quality PVC. It meets European VDE standards. It works hard so your machines do not stop.
Read below to see why this flexible control cable is the right choice for your projects. Then email us for a quote. We ship worldwide.
What Is the 1119003 Cable?
This cable is a multi-purpose line. It carries power and control signals. It has 3 cores (wires inside). Each core has a cross-section of 0.5 square millimeters. This size is perfect for low-voltage power and data logic.
It belongs to the 110 series. This series is famous for being flexible. You can move it, bend it, and twist it. The insulation does not crack. It is built for “dynamic” use. This means it works well in moving parts like robot arms or conveyor belts.
The part number 1119003 identifies the specific type. It is often called LAPP ÖLFLEX CLASSIC 110. But we make compatible versions that fit your budget. We focus on pure copper core wires. This ensures low resistance. Your equipment gets the power it needs without wasting energy.
Technical Specifications You Can Trust
We know you need exact numbers. Here are the specs for this 3-core 0.5mm cable:
- Conductor Material: Bare copper (high purity). We can also do tinned copper for extra corrosion resistance.
- Number of Cores: 3.
- Cross-Sectional Area: 0.5 mm².
- Wire Gauge: 20 AWG.
- Insulation Material: PVC (Polyvinyl Chloride).
- Sheath Material: PVC. Color is usually Grey (RAL 7001).
- Rated Voltage: 300/500 Volt (U0/U).
- Test Voltage: 2000 Volt.
- Outer Diameter: 5.1 mm (approx 0.201 inches).
- Bending Radius: Fixed: 4x diameter. Moving: 10x diameter.
- Temperature Range: -40°C to +80°C.
- Shielding: Unshielded.
- Certifications: VDE, RoHS, CE, ISO.
These specs match the signal control cable standards used in Europe and North America. The 0.5 square millimeter size is small but powerful. It handles up to 9 Amps of current. This is enough for most sensors, actuators, and small motors.
Why Choose a Flexible 3-Core Cable?
Stiff cables are a headache. They break when you pull them. They take up too much space. Our flexible control cable solves this.
Easy Installation in Tight Spaces
Control cabinets are crowded. You have relays, PLCs, and terminal blocks. A stiff wire is hard to route. Our cable uses fine copper strands. It bends around corners easily. You save time during installation. You do not need extra tools to force it into place.
Resists Wear and Tear
In factories, cables get dragged. They rub against metal. They get stepped on. The PVC jacket on our 1119003 cable is tough. It resists abrasion. It also resists oil and chemicals. If you use it in a workshop with coolant or grease, the sheath does not dissolve.
Perfect for Drag Chains
Do you use cable carriers (drag chains)? This cable is designed for it. It cycles thousands of times. It does not twist or kink. This is vital for industrial automation. If the cable fails, the whole production line stops. We build cables that keep moving.
Where to Use This Cable? (Application Scenarios)
You can use this wire in many places. Here are the top scenario words for this product:
Industrial Automation & Robotics
This is the #1 use. Connect servo motors to drives. Link sensors to PLCs. Use it in robotic arms. The 3-core design lets you carry power (L), neutral (N), and ground (PE) or a signal in one go. It keeps the wiring clean.
Building Management Systems (BMS)
Control HVAC systems. Connect fire alarms. Use it for lighting control. The 0.5 square millimeter core is great for 24V or 110V control circuits. It is safe because the PVC is self-extinguishing. If there is a short circuit, it does not spread fire.
Photovoltaic (Solar) Inverters
Solar panels need to talk to the inverter. They use RS485 or CAN bus signals. This signal control cable shields the data from noise. It handles the outdoor UV exposure (if you use the right black PE jacket version).
Medical Equipment & Special Vehicles
Hospital beds and diagnostic machines need reliable power. Special vehicles like forklifts vibrate a lot. A flexible cable absorbs vibration. A stiff cable would snap at the connection point. Our pure copper core ensures stable voltage for sensitive electronics.
Audio and Data Transmission
While it is not a dedicated audio cable, the twisted pair structure (if shielded) reduces interference. You can use it for low-voltage data links. It is also great for CCTV camera power and video (composite).
Quality You Can See and Feel
We do not cut corners. The pure copper core is the heart of the cable. Some cheap sellers use Copper Clad Aluminum (CCA). CCA breaks easily. It has high resistance. It gets hot. Our copper is 99.9% pure. It conducts electricity better. It runs cooler.
The PVC insulation is consistent. We check the wall thickness. It must be even. If it is too thin, it shorts out. If it is too thick, it is too stiff. We hit the perfect balance.
We also test the tensile strength. You should be able to pull the cable without ripping the wires out of the plug. We use strong crimping and soldering standards.
Compare: Standard vs. Premium
You might see cheaper 3-core cables online. Here is why ours is better:
- Copper Quality: We use high-grade electrolytic copper. Cheap ones use recycled scrap copper.
- Stranding: We use more strands per wire. This makes it super flexible. Cheap ones have few strands and break fast.
- Sheath Material: Our PVC is RoHS compliant. It does not smell bad. It stays flexible in the cold. Cheap PVC gets brittle and cracks in winter.
- Length: We sell exact lengths. Some suppliers short you by 5-10%. We guarantee the meter count.
Get Your Quote Today
You need a reliable partner for your export cable business. We are a factory. We can make the 1119003 spec or customize it.
Need a black sheath? We can do it.
Need a longer length? We cut to order.
Need special printing on the jacket? We add your logo.
The market for signal control cables is growing. Do not lose customers because of bad wires. Use a cable that works.
Contact us now. Send us your inquiry. Ask for a free sample. Test it in your lab. Pull it. Bend it. Burn it (safely). You will see the quality.
Email us today. Let’s power your projects together.