Premium 10-Core 22 AWG Double-Shielded Signal Control Cable – Soft, Oil-Resistant & Tin-Plated (300V)

Description

Are you tired of signal interference and stiff cables that break easily?

We know the struggle. You are running complex wiring for a control system, a multi-channel audio setup, or a precision machine. You buy a cheap cable. It looks good on paper. But when you install it, it is stiff like a rock. It kinks. It breaks. Worst of all, you get noise in your signal. Your data is wrong. Your audio has a hum. You have to stop work. You have to rip it out. You waste money and time.This happens because of bad shielding and cheap copper. The cable picks up noise from motors and lights. The jacket cracks when you bend it. The wires corrode when they touch oil or moisture. It is a headache you do not need. You need a cable that works right the first time. You need a cable that is flexible, tough, and quiet.

The Solution: A Cable Built for Tough Jobs and Clean Signals

Our 10-core 22 AWG double-shielded control cable is the answer. We built this for the real world. It is not just a wire. It is a system to keep your signals clean.First, look at the shielding. This is the most important part. We use a double-shield system. Inside, there is a 100% coverage aluminum foil shield. It wraps around the wires tight. This stops high-frequency noise. Then, we add a braided copper shield over the foil. This stops low-frequency interference. We also add a tinned copper drain wire. You can ground this easily. This double layer creates a fortress around your signal. It keeps outside noise out. It keeps your signal strong.Second, the conductor is top quality. We use 22 AWG stranded bare copper. It is tin-plated. Why tin? Because it stops rust. If the cable gets wet or touches chemicals, the copper does not turn green. It stays shiny and conductive. The strands are very fine. This makes the cable extra soft. You can bend it around tight corners. It does not kink. It stays flexible even in cold weather.Third, the jacket is tough. We use a special PVC mix. It is oil-resistant. If you work in a factory with hydraulic oil or grease, this jacket will not melt. It resists abrasion too. It will not scrape off if it rubs against metal. It is also flame retardant. It meets safety standards like FT4. This is crucial for building wiring.

Technical Specifications You Can Trust

We believe in being honest. Here are the real numbers for our 10-core cable:

  • Conductor: 22 AWG (approx. 0.32mm diameter). Stranded tinned copper for flexibility and anti-corrosion.
  • Number of Cores: 10 cores. Perfect for multi-channel control or data.
  • Shielding: Aluminum foil (100% coverage) + Copper braid (high coverage). Double shield for maximum EMI/RFI protection.
  • Drain Wire: 22 AWG tinned copper drain wire included for easy grounding.
  • Insulation: PVC insulation around each core. Color-coded for easy identification (Black, Red, White, Green, etc.).
  • Jacket: Oil-resistant, flame-retardant PVC outer jacket. Black color is standard.
  • Voltage Rating: 300/300V. Safe for most control and signal applications.
  • Temperature Range: Flexible from -20°C to +70°C. Does not get brittle in the cold.
  • Capacitance: Low capacitance (approx. 62 pF/ft) to keep signal distortion low.
  • Resistance: Low DC resistance (approx. 16.7 Ω/km) so you do not lose power over distance.
  • Packaging: Standard 100m or 200m rolls. Custom lengths available.

Where to Use This Cable

This cable fits many jobs. It is a workhorse. Here are the best places to use it:

  • Industrial Automation: Connect PLCs to sensors and motors. The 10 cores let you run power, ground, and multiple control signals in one cable. The oil resistance is perfect for factory floors.
  • Audio and Video Systems: Use it for balanced audio lines or low-voltage video. The double shield stops hum from stage lights or power lines. It is great for patch bays and rack wiring.
  • Robotics and CNC Machines: Robots move a lot. They need flexible cables that do not snap. This cable handles constant motion well. The fine strands resist fatigue.
  • Data and Communication: Good for RS-232, RS-485, or low-speed data networks. It keeps data packets clean in noisy electrical environments.
  • Control Panels: Wire your push buttons, indicator lights, and switches. The soft jacket makes it easy to route inside tight control boxes.
  • Security Systems: Connect cameras, alarms, and access control panels. The shielding protects sensitive video signals.

Why Our Cable Beats the Competition

You see many cables online. They look the same. But they are not the same inside.Some sellers use “CCA” (Copper Clad Aluminum). This is cheap junk. It breaks easily and conducts poorly. We use pure copper. It costs more, but it works better and lasts longer.Some cables have weak shielding. They might have a loose braid or no foil. Our braid is tight. Our foil is 100% coverage. We test our shielding effectiveness. You get real noise reduction.Some jackets are hard plastic. They crack when you install them. Our PVC mix has plasticizers. It stays soft. You can pull it through conduits easily. It saves you installation time.We also follow strict standards. Our cable meets UL, RoHS, and CE requirements. We do not cut corners on safety. You get a product that is legal to use and safe for your customers.

How to Order and Get a Sample

We make buying easy. We are a factory. We can make custom cables. Need a different jacket color? We can do it. Need a different length? We can cut it. Need a special connector? We can help source it.We offer free samples for serious buyers. Test it in your lab. Test it on your machine. Bend it. Pull it. Compare it to your current supplier. We are sure you will like ours better.The price is competitive. We remove the middleman. You buy direct from the production line. We ship worldwide. We pack it well so it does not get damaged in transit.

Ready to Stop Worrying About Bad Cables?

Do not let a bad cable ruin your project. Get the best signal control cable on the market. It is soft. It is shielded. It is oil-resistant. It is ready to work.Contact us now. Send us an email. Tell us what you need. We will send you a quote within 24 hours. Let us build a long-term relationship. Your success is our success.Click here to request a quote or order a sample today!