Tired of Signal Noise and Broken Cables in Your Factory?
You know the feeling. Your production line is running fast. Then, a sensor acts weird. The robot arm stops for no reason. Or the control panel shows errors that are not real. You check the machine, and it is fine. The problem is often hidden in the wires. Cheap cables break easily when they move. They pick up noise from motors and变频器 (VFDs). This messes up your data. It causes downtime. It costs you money every minute. You need a cable that is tough, quiet, and lasts a long time. You need a cable built for the real world, not just a lab. This is where the German LAPP 3 core 0.25mm² shielded control cable comes in. It solves these headaches before they start.
What Makes This Cable Different?
This is not just a standard wire. It is a precision tool for your machines. We use high-quality materials and strict German standards. The core is made of bare copper. It is not just one solid piece. It is many tiny wires twisted together. This makes the cable very flexible. You can bend it around corners without breaking it. The cross-section is 0.25 square millimeters. This size is perfect for control signals and low-power sensors. It fits into tight spaces inside control cabinets.The insulation is PVC (Polyvinyl Chloride). It handles heat well. It resists oil and chemicals. If your factory has coolant or grease on the floor, this cable can handle it. The outer sheath protects the inner wires from physical damage. It is gray (RAL 7001) or black (RAL 9005). You can choose the color that fits your setup. This cable is designed for fixed installation. It is also good for occasional movement. For example, if you need to move a cable a little bit during maintenance, it will not crack.
The Secret to No Interference: Shielding
Electrical noise is everywhere in a factory. Big motors, welders, and power lines create magnetic fields. These fields can induce voltage in your signal wires. This is called electromagnetic interference (EMI). If your cable is not shielded, your PLC might read a “1” when it should be a “0”. This causes errors.This LAPP cable has a shield. It is usually an aluminum foil tape. Sometimes it has a copper braid too. This shield acts like a cage. It catches the noise and sends it to the ground. It keeps your data clean. But here is the trick: the shield must be grounded. If you do not connect the shield to the earth ground, it will not work. It might even make the noise worse. So, when you install it, make sure you connect the drain wire properly. This simple step saves hours of troubleshooting later.
Technical Specifications You Can Trust
We believe in transparency. Here are the hard numbers for this specific model. You can compare these with your current supplier.
- Brand: LAPP (German Quality)
- Series: ÖLFLEX® CLASSIC 110 (The industry standard)
- Conductor Material: Bare Copper (Stranded)
- Number of Cores: 3 (Standard is 3, but we can do 2, 4, 5, or more)
- Cross-Section: 0.25 mm² (AWG 24)
- Insulation Material: PVC
- Sheath Material: PVC or PUR (Polyurethane for high oil resistance)
- Shielding: Yes (Aluminum Foil + Copper Braid option)
- Rated Voltage: 300/500V (U0/U)
- Test Voltage: 2500V
- Temperature Range: -40°C to +70°C (Fixed), -5°C to +70°C (Flexing)
- Bending Radius: 4 times the cable diameter (approx. 18mm)
- Outer Diameter: Approx. 6.0mm to 6.5mm
- Weight: About 45 kg/km
- Standards: VDE, IEC, CE, RoHS
Where Should You Use This Cable?
This cable is a workhorse. It fits in many places. You will see it in control panels for machines. It connects sensors to the PLC. It is great for conveyor belts. It works in HVAC systems for building automation. You can use it in packaging machines. It is also good for simple robotics if the movement is not too extreme.If you have a machine that moves back and forth all day, you might need a special high-flex cable like ÖLFLEX® ROBOT. But for 90% of industrial jobs, this CLASSIC 110 is perfect. It is cost-effective and reliable. It does not crack when you pull it through conduits. It resists moisture. If you are building a new control panel, use this cable. It makes your wiring look professional. It is easy to strip and crimp lugs onto.
Why Buy from a German Brand?
You might find cheaper cables from other places. But cheap cables often cut corners. The copper might be recycled and break easily. The insulation might get brittle in the cold. The shielding might be too thin to work. LAPP has been making cables since 1959. They invented the first flexible control cable. They test their products to destruction. They ensure that every meter meets the spec. When you buy LAPP, you buy peace of mind. You know the cable will work for 10 or 20 years. You avoid the cost of replacing wires later.
How to Order and Install
We sell this cable by the meter or in reels (usually 100 meters). You can cut it to the exact length you need. This reduces waste in your factory. When you install it, use standard cable glands. Make sure the gland grips the outer sheath tightly. This pulls the strain off the wires. For the shield, use a shielded connector. Connect the shield to the metal backplane of your cabinet. Do not “pigtail” the shield if you can avoid it. A solid 360-degree connection is best.
Get Your Quote Today
Do not let bad cables ruin your production. Upgrade to a cable that works as hard as you do. Whether you need 100 meters for a new project or 10,000 meters for mass production, we can supply you. We have the stock in our warehouse. We can ship it to your factory fast.Click the “Inquiry” button now. Send us your requirements. Tell us the core count, the length, and if you need PVC or PUR sheath. We will send you a competitive price within 24 hours. Let us help you build a more reliable machine.