Stop Losing Signals and Wasting Time on Stiff Cables
You know the frustration. You are in the middle of a complex setup in a factory or a lab. The wires are hard to pull through the conduit. They kink the moment you bend them. Worst of all, you get weird errors in your data because of electrical noise from nearby motors. You need a cable that moves easily, blocks interference, and lasts for years. This is not just a wire. It is a solution for your signal problems. We built this cable for engineers who need reliability without the headache. It uses high-quality Japanese Ridai standards to solve your cabling issues.
Why This 30-Core Shielded Cable Is Different
Most cables claim to be flexible, but they break if you bend them too often. Others say they are shielded, but noise still gets through. This product is different. It combines a high strand count with a special ultra-soft jacket. The “twisted pair” design cancels out noise. The shield acts like a guard. It keeps outside interference away from your sensitive data.This cable is specifically for signal control. It is not for high power. It is for your sensors, your control panels, and your data lines. The 30 cores give you plenty of room to grow. You can run multiple signals in one single cable. This saves space and cuts down your installation time. You do not need to pull five different cables when one will do the job.
Technical Specs That Matter to You
We keep things simple. No confusing codes. Just the facts you need to know to make sure it fits your project.
Physical & Electrical Details
- Conductor: 22 AWG (0.34 mm²) stranded copper.
- Plating: Tin-plated. This stops corrosion and makes soldering easy.
- Stranding: Fine strands. This is the secret to the “ultra-soft” feel.
- Core Count: 30 pairs (60 cores total) twisted together.
- Shielding: Overall foil shield with a drain wire + braided shield.
- Jacket Material: PVC or SR-PVC (Semi-Rigid PVC). It resists oil and abrasion.
- Voltage Rating: 300V. Safe for most low-voltage control circuits.
- Temperature Range: -40°C to 105°C. It works in freezers and hot factories.
- Outside Diameter: Approx 0.187 inches (4.75mm) depending on jacket.
Performance Standards
- Insulation Breakdown: Over 3400 volts AC. It is tough.
- Compliance: RoHS compliant, REACH compliant, UL/CSA listed.
- Fire Rating: VW-1 or FT1 flame retardant.
Where to Use This Cable
You can use this wire in many places. Here are the top three spots where it shines.
Industrial Automation & Robotics
Factories are noisy places. VFDs (Variable Frequency Drives) and servo motors create a lot of electrical noise. If your sensor cable is not shielded, your PLC (Programmable Logic Controller) will read wrong numbers. This cable stops that. It is perfect for connecting:
- CNC machines
- Robotic arms
- Conveyor belt sensors
- Process control instrumentation
The ultra-soft jacket makes it great for moving parts. If the cable is in a drag chain, it will flex millions of times without cracking.
Audio/Video and Data Buses
You need clean signals for audio and video. This cable works well for:
- RS-232 and RS-485 data buses
- CCTV camera control (PTZ)
- Alarm and security systems
- Low-voltage lighting controls
The twisted pairs ensure that the data signal stays strong over long distances. You can run this up to 100 meters (328 feet) without needing a repeater for most signal types.
Aerospace and Defense
This cable meets high standards for weight and performance. It is lightweight but strong. The tin-plated copper resists humidity and salt air. It is a good fit for:
- Avionics wiring
- Land vehicle communication systems
- Harsh environment sensors
The “Ultra-Soft” Advantage
Why do we keep saying “ultra-soft”? Because time is money.Imagine you have to wire a control panel with 30 signals. If the cable is stiff, you have to fight it. You need extra hands to hold it in place. You might even need to use cable ties every inch.With this Ridai cable, you can route it around corners easily. It stays where you put it. It reduces strain on the connectors. This means your connectors last longer. You save hours on labor costs during installation.The tin-plated copper also helps. Bare copper oxidizes over time. Tin does not. When you strip the wire, it is bright and shiny. It is ready to crimp or solder immediately. You do not need to clean it.
How to Order and Customize
We know every project is unique. Maybe you need a different jacket color for safety coding. Maybe you need a specific length cut. We can handle it.Standard Options:
- Jacket Color: Grey (custom colors available).
- Length: Cut to length or reels (100m, 500ft, etc.).
- Marking: Sequential foot marking available for easy tracing.
Special Requests:
- Need a different shield coverage? We can do 85% or 95% braid.
- Need a low-smoke zero-halogen (LSZH) jacket for subways or tunnels? Ask us.
- Need specific connector types pre-installed? We can help source them.
Frequently Asked Questions
Is this cable waterproof?The jacket is water-resistant and suitable for wet environments. However, it is not a submersible cable. For direct burial or underwater use, you need an extra outer sheath.Can I use this for Ethernet (Cat5/Cat6)?No. This is for control signals and low-speed data (RS-232/485). It is not rated for high-frequency network data like 100MHz Ethernet.What is the bend radius?Because it is ultra-soft, the minimum bend radius is about 4 times the cable diameter. That is roughly 0.75 inches (19mm). Do not kink it sharply.Do you ship to the US and UK?Yes. We ship globally via DHL, FedEx, or sea freight. We handle all the export paperwork.
Get Your Quote Today
Do not settle for cables that fail. Get a product that works as hard as you do. Whether you need 5 meters for a prototype or 10,000 meters for a factory, we have the stock.Click the “Request Quote” button now. Tell us your core count, AWG size, and length. We will send you a price and a datasheet within 24 hours. Let’s fix your signal problems for good.