Imported Japanese HITACHI 34-Core 0.1mm² Twisted Pair Shielded Wire – Soft, Oil & Dust Resistant Cable for Industrial Automation

Description

Is Your Factory Wiring Failing You? Stop the Downtime Now.

You know the feeling. You are running a high-speed production line or a complex robotic system. Suddenly, a sensor drops out. A robotic arm freezes. You check the wires, and they look fine on the outside. But inside? The insulation is cracked from constant movement. Oil from the machines has eaten through the jacket. Dust and metal shavings have caused a short circuit in the shield.This is not just annoying. It is expensive. Every minute your line is down, you lose money. You need a cable that does not just carry a signal. You need a cable that survives the battlefield of your factory floor. You need something built to Japanese industrial standards.We are talking about the Imported Japanese HITACHI 34-core 0.1 square millimeter twisted pair shielded wire. This is not a generic cable from a bargain bin. This is a precision-engineered solution designed for high-performance vehicles, EVs, and heavy industry. It is soft enough to bend a million times. It is tough enough to resist oil, chemicals, and dust. Let’s look at why this is the exact cable you need.


What Makes This HITACHI Cable Different?

When you buy “imported Japanese” quality, you are buying a legacy. Hitachi Cable (now part of Proterial) started in 1918. They built the first copper wires for electrical use in Japan. Over 100 years, they moved from simple wires to the complex cables that power submarines and space-grade electronics.This specific product uses their advanced manufacturing process. It is designed for EV high-voltage systems and automotive wiring harnesses. If it can handle the heat and vibration of an electric car engine, it can handle your factory.The core pain point for most buyers is stiffness. Stiff cables break when robots move. They are hard to install in tight spaces. This Hitachi cable solves that with a special soft PVC jacket. It has excellent flexibility and torsion resistance. You can twist it, bend it, and route it through drag chains without worrying about internal conductor damage.


Technical Specifications: The Numbers That Matter

You need hard data to make a decision. Here is the breakdown of the 34-core 0.1mm² twisted pair shielded wire based on Hitachi’s strict manufacturing standards (UL and CSA approved).

  • Brand Origin: Imported Japanese HITACHI (Proterial Ltd.)
  • Conductor Type: 34 Cores (17 Pairs)
  • Conductor Size: 0.1 square millimeter (Approx. 28 AWG stranded)
  • Conductor Material: Tinned Copper (Resists corrosion)
  • Insulation Material: Lead-Free PVC / Semi-Rigid PVC (LF)
  • Jacket Material: Flexible PVC (CMG or CMG-LSZH options)
  • Shielding: Dual Shield (Aluminum/Polyester Tape + Tinned Copper Braid)
  • Voltage Rating: 300V (UL Standard)
  • Temperature Range: -20°C to +75°C (Operation), -40°C to +60°C (Storage)
  • Impedance: Controlled for signal integrity (typically 100Ω ± 15Ω for data, but varies by pair count)
  • Flame Rating: UL 758, CSA C22.2, UL 910 (Plenum options available)
  • RoHS Status: Fully Compliant (Lead-Free, Restriction of Hazardous Substances)

The 0.1 square millimeter cross-section is the sweet spot. It is thick enough to carry power and data signals over reasonable distances without voltage drop. But it is thin enough to keep the overall cable diameter small. For a 34-core cable, keeping the outer diameter (O.D.) down is critical for cable management.


Built for Harsh Environments: Oil, Dust, and Heat

Your machines leak oil. Your air is full of metal dust. Your control cabinets get hot. Standard cables crumble under these conditions.This Hitachi wire features superior oil resistance. The PVC compound is formulated not to swell or soften when it touches hydraulic fluid or cutting oil. This is vital for CNC machines and automotive assembly lines.It is also dust-resistant and cut-through resistant. The outer jacket is tough. In mining or oil & gas applications, we see cables getting scraped against rocks. The Hitachi jacket resists abrasion. For general factory use, this means the cable won’t get nicked by sharp cabinet edges or moving parts.The dual shielding is your defense against noise. In a factory with VFDs (Variable Frequency Drives) and heavy motors, electromagnetic interference (EMI) is a nightmare. It corrupts data. This cable uses:

  1. Aluminum/PET Tape: Blocks high-frequency noise.
  2. Tinned Copper Braid (85% coverage): Blocks low-frequency noise and grounds the shield.
  3. Drain Wire: A 28 AWG tinned copper wire inside makes grounding the shield easy and fast.

Where Should You Use This Cable? (Use Cases)

You might be thinking, “34 cores? That is a lot.” But in modern automation, you need many wires in one bundle to save space. Here are the top scenarios for this imported Japanese twisted pair shielded wire:

Robotic Automation Cables

Industrial robots have dozens of sensors in their arms. They need power, ground, and data lines all running up the arm. This cable’s flex life (resistance to bending) is perfect for robotic drag chains. It won’t snap after 100,000 cycles.

SCSI and Data Transmission Systems

Looking at the specs, this matches the Hitachi SCSI Lite family. If you are maintaining legacy industrial servers or high-end test equipment that uses 68-pin (34-pair) connectors, this is the OEM-grade replacement. It supports high-speed data transfer with low crosstalk because the pairs are twisted with different lays (left-hand lay).

EV and Battery Management Systems (BMS)

Because Hitachi makes wires for electric vehicles, this 0.1mm² wire is great for BMS harnesses. It connects battery cells to the control unit. It handles the heat of the battery pack and resists the acid/oil fumes in the engine bay.

Broadcast and Defense Installations

Hitachi supplies the US military and federal agencies. This cable is rugged enough for field use. If you are setting up a mobile broadcast unit or a defense communication trailer, this cable can handle being coiled, uncoiled, and dragged across dirt and gravel.


Why Buy Imported Japanese Hitachi vs. Generic Alternatives?

You can buy cheap shielded wire from local distributors. But here is the truth:

  • Generic Wire: Inconsistent copper purity, jacket cracks in cold, shielding coverage is spotty (60% instead of 85%), and it fails UL flame tests.
  • Hitachi Wire: Every batch is tested. The copper is high-purity for low resistance. The twisting machine ensures exact pair geometry for signal speed. The jacket material is custom-mixed for flexibility.

You are paying for reliability. In a safety-critical system (like a brake-by-wire system or a medical robot), a 0.10savingonawireisnotwortha10,000 repair.Also, this wire is REACH and RoHS compliant. If you export your machinery to Europe or the US, you cannot use lead-based cables. This Hitachi wire is environmentally safe and legal for global trade.


Installation and Handling Tips

To get the most out of this 34-core shielded wire, follow these simple tips:

  1. Bending Radius: Don’t bend it too sharp. Keep the bend radius at least 10 times the cable diameter.
  2. Grounding: Always ground the drain wire and the braid at one end (usually the control panel end) to avoid ground loops.
  3. Stripping: Use the right stripper. The insulation is soft, so a dull blade will nick the copper. Nicked copper leads to corrosion and breaks.
  4. Connectors: For 34-core applications, use high-quality D-Sub or ribbon connectors. Crimp them properly. A bad crimp is worse than no crimp.

Get Your Quote Today

You need a cable that works the first time, every time. You need the durability of Japanese automotive engineering in your factory.We have stock of the Imported Japanese HITACHI 34-core 0.1mm² twisted pair shielded wire ready to ship. Whether you need 100 meters for a prototype or 10,000 meters for a production run, we can supply it.Don’t risk your production line with cheap, stiff wire that will crack in a month. Upgrade to the Hitachi standard.Click “Request Quote” now. Tell us your required length, jacket color (we have gray, black, and custom options), and connector needs. Our engineering team will confirm the exact specs (UL, CSA, VW-1) and get you the best price for this premium industrial cable.Let’s build something reliable together. Send your inquiry today.