Is Your Production Line Stopping Because of Bad Cables?
You know the feeling. You are running a busy factory. Suddenly, a machine stops. The screen shows an error. You check the machine, but it is fine. The problem is the cable. Cheap cables break easily. They get stiff in the cold. They crack when they touch oil. Worst of all, they let in “noise” that messes up your data signals. This costs you money every hour. You need a cable that works hard, stays flexible, and protects your signals. This is not just a wire. It is the lifeline for your precision machinery. We build it to last, even in the toughest places.
What Makes This 10-Core Cable Special?
This is not a standard wire you find at a local shop. It is built for industrial use. We use pure copper, not cheap alloys. The wire has 10 cores inside. Each core is 0.5 square millimeters (about 20 AWG). This size is perfect for control signals and low power. It fits into tight spaces inside control cabinets. But the best part is the shielding.
The Shield Stops Noise
Electrical noise is everywhere. Motors, welders, and other machines create waves. These waves can trick your control system. A “ghost” signal might tell a robot arm to stop when it should go. Our cable has a shield. It is a braided layer of tinned copper wire wrapped around the cores. It acts like a guard. It catches the noise and sends it to the ground. This keeps your data clean. Your machines run smoother. You get fewer errors. This is critical for CNC machines and robot arms.
Super Flexible for Moving Parts
Machines move. Cables move with them. If a cable is stiff, it will snap. We use a special PVC or TPE jacket. It stays soft even when it is cold. You can bend it around corners easily. It resists oil and chemicals. If you work in a food plant, it is safe. It does not have halogens. If there is a fire, it does not make toxic smoke. It is also UV resistant. You can use it outside in the sun without it cracking.
Technical Specs You Need to Know
We believe in being honest. Here are the real numbers for this cable. You can compare them to your current supplier.
| Feature | Specification |
|---|---|
| Conductor | Bare Copper, Stranded (Class 5) |
| Core Size | 0.5 mm² (20 AWG) |
| Number of Cores | 10 Cores |
| Shielding | Tinned Copper Braid (Coverage >85%) |
| Insulation | PVC or TPE (Color coded) |
| Voltage Rating | 300/300V (Up to 600V for fixed wiring) |
| Test Voltage | 2000V to 4000V |
| Temperature | -15°C to +70°C (Flexible use) |
| Bending Radius | 8x Cable Diameter (Fixed) / 12x (Flexing) |
| Outer Diameter | Approx 11.0mm – 13.5mm |
| Weight | Approx 180 – 220 kg/km |
| Standards | UL 1007, UL 1015, CE, RoHS |
The conductor resistance is about 39 Ohms per kilometer. This is low. It means less power loss over long runs. The insulation resistance is very high, over 100 Mega-ohms. This stops current from leaking out.
Where Should You Use This Cable?
You can use this wire in many places. It is a “machine tool wire.” But it is also a “control cable.” Here are the best spots for it.
CNC Machines and Lathes
Computer Numerical Control (CNC) machines need precision. A tiny voltage drop can ruin a part. Use this cable for the control panel to the servo motor. It handles the feedback signals. The shielding stops the motor noise from interfering with the computer data.
Robotics and Automation
Robot arms move constantly. The cables in the “power chain” take a lot of stress. Our cable is flexible. It can handle millions of bends. It is perfect for the teach pendant (the handheld controller) or the internal wiring of the arm.
Building and HVAC Systems
You can use it for sensors in buildings. It works for fire alarms, temperature sensors, and lighting control. Because it is shielded, it works well near big elevators or heavy pumps where there is a lot of electrical noise.
Food and Beverage Industry
The jacket is smooth and non-stick. It is easy to clean. If you use the TPE or PUR version, it resists washdown chemicals. It is also “halogen-free.” This is a strict rule in food plants. You want safety first.
Why Buy From Us?
We are a factory, not just a trader. We make these cables every day. We know what breaks and why. We fix those weak spots.
Real Copper, Real Quality
Some sellers use “copper-clad aluminum” (CCA). It is cheap but breaks easily and heats up. We use 99.9% pure copper. It conducts better. It lasts longer. You save money in the long run because you do not have to replace it.
Custom Lengths and Ends
Do you need 500 meters? Or 10 kilometers? We can cut it to length. We can also add ferrules or connectors if you need them. We pack it on strong reels, not cheap plastic spools that break during shipping.
Fast Shipping and Support
We ship to the US, UK, Australia, and Europe. We know the customs rules. We label the boxes correctly so they clear fast. If you have a technical question, we answer it. We are engineers, not just salespeople.
How to Order and Get a Sample
Do not guess. Let us prove it works. We can send you a free sample cut. You can test it in your machine. Bend it. Pull it. Put it in oil. See if it holds up.We are ready to quote your project. Tell us how many meters you need. Tell us where it is going (indoor, outdoor, wet, dry). We will give you a price that beats the big brands but keeps the quality high.Stop worrying about cable failures. Fix your production line today. Click the button below or email us. Let’s talk about your cable needs. We are waiting for your inquiry.Request a Quote Now