Imported 10-Core 0.25mm² Double-Shielded Signal Control Cable (LIYCY) – High Flexibility & Oil Resistant

Is your production line stopping because of bad cables?

You know the feeling. You set up a new machine or a robot arm. Everything works perfect for a week. Then, suddenly, signals get weird. The robot stops moving right. Sensors give wrong numbers. Or worse, the cable cracks open, and you have a short circuit. This costs you money. Every minute the line stops, you lose profit.Why does this happen? cheap cables break when they move. They get attacked by oil and chemicals. They let electrical noise mess up your data. You need a cable that is tough. It needs to bend millions of times without breaking. It needs to block noise. And it needs to survive in dirty factories.We have the solution. Our imported 10-core 0.25mm² double-shielded signal control cable (LIYCY) is built for the real world. It is not a weak cable. It is a heavy-duty tool for your automation systems. Let’s look at why this is the best choice for you.

Built to stop electrical noise

Electrical noise is the enemy of control signals. In a factory, you have big motors, welders, and variable frequency drives. They all make magnetic fields. These fields can get into your data cables. When this happens, your signals get corrupted. This causes errors in your PLC or CNC machine.Our cable solves this with a double-shield system.First, we use an aluminum foil shield. It wraps around the twisted pairs. This blocks high-frequency noise. It acts like a wall against interference.Second, we add a braided shield made of tinned copper wires. This covers the whole cable. It catches low-frequency magnetic fields. It also grounds the cable.The result? A very high shielding effectiveness. We are talking about 85dB or more at 1GHz. This means your data stays clean. Your 10 signals travel safely without talking to each other. You get zero data loss. This is critical for precise tasks like servo motor control or sensor reading.

Flexibility that lasts forever

In automation, things move. Robot arms swing. CNC machines slide. Cables in drag chains go back and forth all day. If a cable is too stiff, it breaks the connector. Or it snaps inside the sheath.Standard cables might handle 100,000 bends. Our high-flex cable handles much more. We use a special construction for the conductor.The copper wires inside are not solid. They are made of many tiny strands. We use Class 6 flexible copper. The strands are very thin (0.08mm or less). This lets the wire bend easily without metal fatigue.The insulation is also special. We use a material that slides against itself. When the cable bends, the layers move smoothly. They do not stick together. This prevents the cable from twisting and kinking.We test our cables rigorously. They can handle 5 million to 10 million bending cycles. This means you can install it and forget about it for years. It is perfect for dynamic applications where the cable is always in motion.

Tough against oil, chemicals, and water

Factory floors are dirty places. There is cutting oil, hydraulic fluid, coolant, and grease. Standard PVC jackets get soft in oil. They swell up and crack. Then water gets in, and the cable fails.Our imported LIYCY cable uses high-quality sheathes. We offer two main types:PVC (Polyvinyl Chloride): This is great for general use. It is flame retardant (VDE 0332). It resists oil and acids. It works well in dry or slightly damp areas. It is tough but still flexible in cold weather (down to -40°C).PUR (Polyurethane): This is the premium choice. PUR is extremely resistant to oil and chemicals. It does not get sticky or soft. It also resists abrasion. If the cable rubs against metal tracks, the jacket does not wear off. PUR is also hydrolysis resistant. This means water and steam do not destroy it.For underwater or high-moisture areas, we can add water-blocking features. We use a gel or a tape inside the cable. If the outer jacket gets a small cut, water cannot travel along the cable. This protects your expensive electronics.

Easy to install and strip

Time is money. You do not want to spend hours fighting with a stiff cable. Our 0.25mm² cable is slim and easy to route. The outer diameter is small (around 6.8mm to 8mm). This fits into small drag chains and cable carriers. It saves space in your control cabinet.The core wires are color-coded clearly. We follow standard colors (Brown, Black, Blue, etc.). This makes wiring easy for your electricians. They do not need to guess which wire is which. We also include a ground wire (Green/Yellow) for safety.Stripping the cable is simple. The outer sheath cuts cleanly. The inner insulation strips off easily without damaging the copper strands. You can use standard tools like a剥线钳 or automatic stripping machines. The cable holds its shape well during termination.

Technical Specifications

Here are the hard numbers for the engineers. This cable meets European standards (LIYCY / VDE 0816).

Where to use this cable?

This 10-core cable is a workhorse. You can use it for almost any low-voltage signal task.Robotics and CNC: Connect the robot controller to the arm. Send power and data to the end-effector. It handles the constant twisting of the wrist joint.Process Automation: Use it for 4-20mA loops. Connect sensors (pressure, temp, flow) to the PLC. The shielding stops noise from nearby motors.Building Automation: Run it for fire alarms, security cameras, and access control. It fits in walls and ceilings easily.Data and Networks: Use it for RS485 or Modbus networks. The twisted pairs ensure data integrity over long distances (up to 1000m for data).Material Handling: Perfect for conveyor belts, automated storage systems, and AGVs (Automated Guided Vehicles). It survives the vibration and movement.Renewable Energy: Connect solar inverters or wind turbine sensors. It handles the outdoor UV exposure and temperature changes.

Why buy this imported cable?

You might find cheaper local cables. But cheap cables cost more in the long run. They cause downtime. They are hard to install. They break early.Our imported LIYCY cable is consistent. Every meter is tested. The copper is high purity. The shielding coverage is tight. We do not cut corners.We also offer custom lengths and connectors. Need a 10-core cable with M12 connectors on both ends? We can do it. Need a specific color for identification? We can make it.We understand the pain of a factory manager. You need reliability. You need a cable that works today, next month, and next year. This cable delivers that peace of mind.

Get your quote today

Do not wait for your next cable failure. Upgrade your system with the best. Our 10-core 0.25mm² double-shielded cable is in stock and ready to ship.Tell us what you need. How many meters? PVC or PUR jacket? Any special connectors?Send us an inquiry now. We will reply within 24 hours with a competitive price and a technical drawing. Let’s keep your production line running smooth.