Stop Worrying About Cable Failure in Your Machines
You know the feeling. Your production line stops. The CNC machine throws an error. You check the control panel, and you see it—the cable is cracked, stiff, or the insulation is peeling off. Oil leaks from the machine have eaten away at the jacket. Now you have downtime. You have angry customers. You have repair costs.This happens because you are using low-quality generic wire. It cannot handle the movement. It cannot handle the oil. It cannot handle the heat.You need a cable that is built for the real world. You need a cable that bends, twists, and resists oil without breaking down. You need the German standard 9-core 0.75mm² control cable. We call it the 9G 0.75. It is the backbone of modern industrial automation. It works in machine tools, conveyor systems, and even wind turbine generators. It does not fail. It keeps your machines running smooth.This is not just a wire. It is a precision-engineered solution for power and control. It meets the strict VDE standards. It is oil resistant. It is flexible. It is the direct replacement for OLFLEX CLASSIC 110. Let us look at why this specific cable is the best choice for your factory.
What Makes This 9-Core 0.75mm² Cable Special?
This cable is designed for heavy-duty work. It has 9 cores. Eight of them are numbered for control signals. One is a protective earth (ground) wire. The conductor size is 0.75 square millimeters. This is the “sweet spot” for many industrial machines. It carries enough power for sensors and small motors without being too thick to bend.The material is special. The jacket is made from PVC (Polyvinyl Chloride). But this is not cheap plastic. It is VDE-registered oil-resistant PVC. This means if hydraulic oil or cutting fluid spills on it, the cable does not get sticky or brittle. It stays strong. The insulation inside is also PVC. It protects the copper wires from short circuits.The copper itself is high quality. It uses Class 5 fine-wire stranding. This makes the cable very flexible. You can bend it around tight corners in your control cabinet. You can move it in drag chains. It does not snap. It is built for “occasional flexing.” This means it can move, but it is not for constant, high-speed robot motion. For fixed installations or slow movements, it is perfect.
Technical Specifications You Can Trust
We believe in transparency. Here are the hard numbers for the 9G 0.75 control cable:Physical Properties
- Conductor Material: Bare Copper (Fine-wire stranded, Class 5 per VDE 0295)
- Number of Cores: 9 (8 numbered cores + 1 Green/Yellow protective earth)
- Nominal Cross Section: 0.75 mm²
- Insulation Material: PVC (Polyvinyl Chloride)
- Sheath Material: PVC (Oil Resistant)
- Outer Diameter: Approx. 9.4 mm to 11 mm (varies by manufacturer)
- Weight: Approx. 120 kg/km to 140 kg/km
- Color: Grey (RAL 7001) or Black (Customizable)
Electrical Performance
- Voltage Rating: 300/500 V (U0/U)
- Testing Voltage: 4000 V (It can handle high surges)
- Conductor Resistance: Max 26.0 Ω/km at 20°C
- Current Rating: Depends on installation, but safe for control circuits up to 16A in power applications
Temperature & Mechanical Limits
- Operating Temp (Fixed): -40°C to +80°C
- Operating Temp (Moving): -30°C to +70°C
- Minimum Bend Radius (Static): 4 x Cable Diameter
- Minimum Bend Radius (Dynamic): 10 x Cable Diameter
- Tensile Load: Not for heavy pulling. Use in free movement without tension.
Safety & Compliance
- Fire Behavior: Flame Retardant (Self-extinguishing)
- Standards: VDE 0293-334, VDE 0295 Class 5, IEC 60228, IEC 60332-1-2
- Certifications: CE, RoHS 2 (2011/65/EU), REACH (1907/2006)
- Oil Resistance: Yes (CSA AWM 1 & 2, UL AWM 21098)
Where Can You Use This Cable?
This 9-core cable is a workhorse. You will find it in many places. The most common use is in machine tool wiring. This includes CNC lathes, milling machines, and grinders. The cores carry low-voltage signals to the computer and power to the solenoids.It is also great for plant construction. Use it to connect I/O points in your PLC cabinets. It works well in conveyor systems and assembly lines. If the cable is moving, but not millions of times a day, this is the right choice.A special use case is wind turbine generators (WTG). The cable handles the torsional stress inside the loop of the turbine. It resists the oil and vibration found in the nacelle.You can also use it in damp or dry rooms. It handles medium mechanical loads well. If you have a production line where the cable might get stepped on or bumped, the PVC jacket protects it.
Why Choose the “German Standard” Quality?
You might see cheaper cables from other markets. But they often cut corners. They might use recycled copper. The insulation might crack in the cold. They might not pass the VDE oil resistance test.Our 9G 0.75 cable follows the German VDE standards. VDE is one of the strictest testing bodies in the world. If a cable has the VDE mark, it has been tested for safety, durability, and performance.The oil resistance is a big deal. In a factory, oil is everywhere. Cheap cables absorb oil. The insulation swells. The cable gets heavy and stiff. Then it cracks. Our cable repels oil. It stays flexible for years.The flame retardant property is also critical. If there is a short circuit, the cable does not spread fire. It burns slowly and self-extinguishes. This keeps your building safe.
Packaging and Availability
We know you need flexibility for your projects. We do not just sell full reels. We can supply this cable in cut lengths, reels, or drums.
- Standard Reel Lengths: 100 meters, 200 meters, 500 meters, 1000 meters.
- Custom Lengths: We can cut it to 50m, 10m, or whatever you need for a specific machine repair.
- Shipping: Standard export carton with shipping marks. We can add wooden drums for heavy bulk orders.
- Origin: We source from top factories (China or Europe) that meet ISO 9001 quality standards.
Get Your Quote Now
Do not let a bad cable stop your production. You need a reliable partner who understands industrial wiring. We have the 9-core 0.75mm² control cable in stock. It is oil resistant. It is VDE certified. It is ready to ship.Whether you need 100 meters for a prototype or 10,000 meters for a new production line, we can handle it. Our team knows the technical details. We can help you confirm if this is the exact right cable for your voltage and movement needs.Stop searching for “German imported cable” and getting confused results. Come to the expert. We offer the best price for premium quality.Contact us today. Send us your inquiry. Tell us the length you need and the color you want. We will send you a quote within 24 hours. Keep your machines running. Buy the best control cable now.