Stop Worrying About Cable Failures in Your Industrial Projects
You know the feeling. You install a new machine or set up a lighting circuit. Everything works fine at first. But a few months later, the cables get hard. They crack when you move them. Or worse, the insulation fails because of oil leaks from the motor. Suddenly, your production line stops. You lose money. You lose time. And you have to replace the wiring all over again.This happens with cheap cables. They use low-quality copper that breaks easily. The plastic jacket melts when it touches oil or heat. They don’t meet European safety standards. If you are exporting to Germany, the UK, or other strict markets, you cannot use sub-standard wire. You need a cable that bends without breaking. You need a cable that resists oil and chemicals. You need a cable that lasts for years, not months.Our 4-core 1.5mm² power cable solves these problems. It is built for real-world abuse. It uses high-purity copper for maximum power flow. The outer sheath resists oil, diesel, and hydraulic fluid. It is flexible enough to fit in tight spaces but tough enough for heavy industry. This is not just a wire. It is a reliable partner for your electrical systems.
What Makes This 4G 1.5mm² Cable So Special?
Let’s look inside the cable. The most important part is the conductor. We use pure electrolytic copper. It has very low resistance. This means less heat and more power for your motors. The copper is not a single solid rod. It is made of many tiny wires twisted together. We call this “fine-stranded” or “Class 5” construction.Why does this matter? Solid wire breaks if you bend it too often. Our stranded wire moves like a snake. It fits through conduit pipes easily. You can route it around corners without kinking.The insulation is just as important. We use special PVC or PUR (Polyurethane) compounds. Standard PVC gets sticky when it touches oil. Our oil-resistant compound stays strong. It protects the copper from corrosion. We also offer XLPE (Cross-Linked Polyethylene) insulation for higher heat resistance. This cable can handle up to 90°C operating temperature. That is much hotter than standard cables.For sensitive equipment, we add a shield. This is a braided copper mesh wrapped around the cores. It stops electrical noise (EMI) from interfering with your control signals. If you are running data cables next to power cables, this shield is a must-have.
Technical Specifications You Can Trust
We believe in transparency. Here are the exact numbers for our standard 4G 1.5mm² cable:
- Conductor Material: Bare copper, fine-wire stranded (Class 5 IEC 60228)
- Number of Cores: 4 (3 Phase + 1 Earth / Ground)
- Cross-Sectional Area: 1.5 mm² (approx. 16 AWG)
- Insulation Material: PVC, XLPE, or PUR (Oil Resistant options)
- Sheath Material: PVC or PUR (Gray or Black)
- Voltage Rating: 300/500V (up to 450/750V for fixed wiring)
- Test Voltage: 2000V to 4000V
- Current Rating: Approx 15-16 Amps (depending on installation method)
- Resistance: Max 13.7 Ohm/km at 20°C
- Bending Radius: Flexible installation: 4x cable diameter | Fixed installation: 6x cable diameter
- Temperature Range: -20°C to +80°C (PUR versions go higher)
- Certifications: RoHS, VDE 0295, IEC 60228, CE, BASEC Approved
- Flame Retardancy: IEC 60332-1-2
These specs match the high standards required in German machinery and European construction. Whether you need a 0.6/1kV version for heavy power or a 300V version for control panels, we have it.
Where Can You Use This Cable?
This cable is a workhorse. It fits almost any low-voltage application. Here are the top ways our customers use it:##### Motor and Pump ConnectionsThis is the #1 use case. Factory motors vibrate. They get hot. They leak oil. Our oil-resistant 4G 1.5 cable handles this perfectly. It connects variable displacement pumps, direct-drive motors, and sub-plate series machinery. The fine strands resist fatigue from vibration.##### Control Panels and SwitchgearInside a control cabinet, space is tight. You need to bend wires around terminals. Our flexible cable makes wiring easy. It is great for PLC connections, sensor wiring, and interlocking circuits. The black, brown, and grey cores are color-coded clearly. The green/yellow stripe is for the protective earth (ground).##### Lighting and Commercial WiringFor outdoor lighting, jacuzzis, or garden features, you need water and UV resistance. The PUR sheath protects against sunlight and rain. It is also great for residential lighting circuits where you need a dedicated earth wire for safety.##### Data and Instrumentation TraysIn automated factories, you run hundreds of cables together. If you don’t use screened cable, the signals get messy. Our tinned copper braid shield (85% coverage) keeps the signal clean. It is perfect for conveyor systems, assembly lines, and CNC machines.##### Hazardous and Oil-Rich EnvironmentsIf your client works in a mine, a chemical plant, or a shipyard, they need LSZH (Low Smoke Zero Halogen) or heavy-duty PUR cables. We supply cables that resist diesel, hydraulic oil, and even bio-oils. They don’t emit toxic smoke if there is a fire.
Why Buy From Us?
We are not just a trading company. We are a factory with strict quality control. Every batch of copper is tested for conductivity. Every meter of jacket is checked for thickness and oil resistance.We offer customization that big brands can’t match. Need a specific color? We can do it. Need a longer length than 500 meters? We can coil it exactly how you want. Need a special print on the sheath with your logo? We can do that too.Our production capacity is huge. We can ship 3 million meters per month. But we still care about your small order. We treat every inquiry seriously. We know the export rules for Europe and America. We ensure every cable is RoHS compliant and meets REACH regulations. You won’t have your shipment stuck in customs because of bad paperwork.
Get Your Custom Quote Today
Don’t settle for “good enough.” Get the best cable for your project. Whether you need 500 meters for a trial or a full container load, we are ready to supply.Tell us exactly what you need:
- Do you need PVC or PUR (Oil Resistant) sheath?
- Do you need shielding (Screened) or unshielded?
- What is the voltage requirement?
- What is the packing requirement (drums, coils, reels)?
Send us your inquiry now. We will reply within 24 hours with a competitive price and technical drawings. Let’s build something reliable together.Click “Send Inquiry” or “Contact Us” right now to start your order.