Tired of cables that crack, leak, or confuse your electricians?
You run a factory with expensive imported machines. You know that one bad cable can stop the whole line. It is a big headache. You buy cheap cables, and they get hard and crack in the oil. You buy rigid cables, and they are impossible to pull through the drag chains. Your technicians waste hours guessing which wire is which because the colors are wrong. Worst of all, if the cable fails a safety check, you face fines or a fire risk. You need a cable that works as hard as your machines do. You need a cable that is flexible, clear, and built to last in tough industrial environments.
A cable built for real factory floors
This is not just a standard wire. This is a 25-core 1.5mm² power and control cable designed specifically for imported equipment and machine tools. We built it to meet strict German VDE and CE standards. Why does this matter? Because European standards are tough. They demand high quality.The core of this cable is pure copper. We use super-fine stranded copper wire (Class 6 per VDE 0295). This means the wire is very flexible. It can bend and twist thousands of times without breaking. This is perfect for C-tracks, robot arms, and moving machine parts. The conductor resistance is low (about 12.10 ohms per km at 20°C). This means less heat and more power getting to your motors.
Oil-resistant armor for your machines
Factories are dirty places. There is oil, grease, and coolant everywhere. Standard PVC jackets dissolve in oil. They get sticky and fall apart. Our cable uses a special oil-resistant jacket. We use high-quality PUR (Polyurethane) or TPE (Thermoplastic Elastomer).This jacket laughs at oil. It resists diesel, hydraulic oil, synthetic oils, and even bio-oils. It also resists chemicals and abrasion. You can drag it across sharp metal edges, and it won’t tear easily. The temperature range is wide. It works well from -15°C to +80°C for flexing. If fixed, it can handle up to +80°C without issues. This toughness means you do not have to replace the cable every few months.
No more guessing games with wiring
Wiring a 25-core cable is hard. If all the wires are black or blue, your team will make mistakes. Mistakes cost money and time. We solve this with a smart color code.All the main cores are black. But we print clear white numbers on them. You see “1”, “2”, “3”… up to “25”. It is easy to read. You do not need a magnifying glass. We also include a green-and-yellow wire for grounding (GNYE). This follows the JB/OB color code standard. Your electricians can connect the wires fast and right the first time. This speeds up installation and reduces downtime.
Technical Specs at a Glance
Here is the hard data you need for your engineers:
- Conductor: Bare copper, fine-wire stranded (Class 6 / IEC 60228 Class 6).
- Cross-Section: 1.5 mm² (approx. 25 strands of 0.3mm or similar).
- Number of Cores: 25 cores (including ground).
- Insulation: Special PVC or TPE compound (Type Z 7225 or similar).
- Sheath/Jacket: Oil-resistant PUR or TPE, black color, UV resistant.
- Voltage Rating: 300/500V (U0/U).
- Test Voltage: 2000V.
- Bending Radius: Flexing: 12x cable diameter (approx. 150mm). Fixed: 8x cable diameter.
- Weight: Approx. 250-300 kg per km (varies slightly by jacket material).
- Outer Diameter: Approx. 12-14mm (varies).
- Current Rating: In free air, approx. 20-25 Amps per core (depends on grouping).
- Shielding: Optional tinned copper braid available for EMI protection (ask us).
Safety and Certifications You Can Trust
You cannot risk using non-certified cables in your factory. This cable is fully compliant. It has the CE mark. This means it meets the EU Low Voltage Directive and EMC Directive. It is also RoHS compliant. This means no lead, no cadmium, and no harmful heavy metals. It is safe for the environment and your workers.The insulation is flame retardant (VDE 0482-332-1-2). If there is a spark, the cable will not spread the fire. It is also low smoke and halogen-free (LSZH options available). In a fire, it does not release toxic smoke. This is critical for indoor use or in enclosed machine cabinets.
Where to use this cable?
This cable is a workhorse. You can use it almost anywhere you need power and control signals.
- Machine Tools: CNC machines, lathes, milling machines, and grinding machines.
- Robotics: Robot arms, welding robots, and assembly line robots.
- Control Systems: PLC cabinets, control panels, and sensor networks.
- Assembly Lines: Conveyor belts, packaging machines, and sorting systems.
- Data Processing: Server racks and industrial computer setups.
- Outdoor Use: Because the black jacket is UV resistant, you can use it outside in the sun without it cracking.
Why buy from us?
We are a factory, not just a trader. We make these cables every day. We know the details. We can customize the length. We can add connectors if you need them. We can make the jacket PVC if you need it cheaper, or PUR if you need it tough.We sell to Europe, North America, and Asia. Our customers love the clear printing and the flexibility. They tell us our cables last twice as long as the cheap ones from the local market.
Get your custom quote today
Do not let a bad cable stop your production line. You need a reliable partner. We have stock, or we can make fresh batches for you. Tell us exactly what you need. How many meters? Do you need shielding? Do you need a special connector?Send us an email now. Tell us your project details. We will send you a quote within 24 hours. Let us help you keep your machines running smooth. Click the “Inquiry” button or email us directly. Let’s talk about your cable needs.