German Standard 12-Core 0.5 sq mm Shielded Control Cable – ÖLFLEX CLASSIC 110 CY Equivalent with Tinned Copper Braid & Transparent Sheath (PT110CY 12G0.5)

Tired of signal interference, corrosion, and guesswork during installation?

You know the struggle. You buy a cheap cable to save a few dollars. But once it is inside the control panel, you cannot tell which wire is which. The grey jacket looks the same on every meter. You waste hours tracing wires with a multimeter. Then, the machine starts. The motors hum. The sensors glitch. You have electromagnetic interference (EMI) ruining your data. Worst of all, you see green oxidation on the copper wires after a few months in a humid factory. This is not just annoying. It causes downtime. It costs you money in repairs and lost production. You need a cable that solves these problems before they start. You need a cable built like the German standard PT110CY 12G0.5. It is not just a wire. It is a system for reliable power and signal.

What makes this 12-core shielded cable different?

This is not a generic “instrumentation cable” from a local market. This is a precision-engineered control cable. It matches the quality of top German brands like Lapp Kabel. We focus on three things: visibility, protection, and flexibility. The “PT110CY” series is famous for one specific feature: the transparent outer sheath. This changes everything for your technicians.

See inside without cutting the jacket

Most cables use a black or grey PVC outer sheath. You have to strip the insulation to see the cores. That takes time. It risks damaging the wire. With our transparent sheath, you can see the core colors instantly. The cores have white numbers printed on them. You can see the number “1”, “2”, or “3” right through the clear jacket. This makes installation 50% faster. You can check the wiring sequence at a glance. It reduces human error to almost zero.

The Tinned Copper Mesh advantage

Why do we use tinned copper for the shielding mesh? Normal copper corrodes. It turns green when it touches moisture or chemicals. Tinned copper does not. The tin coating acts as a shield against oxidation. This cable is built for harsh environments. It can handle wet areas, oily machine shops, and outdoor UV exposure. The mesh itself is knitted, not just a foil wrap. A braid mesh is flexible. It does not crack when you bend the cable. It provides a “Faraday cage” effect. It keeps outside noise out. It keeps your signal clean inside.

Technical Deep Dive: Inside the Cable

Let us look at the layers. We build this cable to last. Every material has a job. We do not use cheap fillers.

The Conductor: Fine-wire stranded copper

We use Class 5 fine-wire stranding according to IEC 60228. This means the copper is not a solid stiff rod. It is made of many tiny wires twisted together. This makes the cable very flexible. You can route it around tight corners in a robot arm or a CNC machine. It resists metal fatigue. You can move it (flex it) occasionally without breaking the core. The conductor resistance is low. We keep it under 39 Ohms per kilometer. This means less voltage drop. Your equipment gets the power it needs, even over long runs.

Insulation and Sheath: High-grade PVC

The insulation around each core is PVC. The inner sheath under the armor (or braid) is PVC. The outer sheath is also PVC, but it is transparent. This PVC is not the brittle kind. It is formulated for flexibility. It has a temperature range from -40°C to 70°C for flexing. For fixed installations, it can handle up to 80°C. It is oil-resistant. It resists acids and alkalis. If you use this in a chemical plant, the jacket will not dissolve if a drop of acid spills on it.

The Shield: Tinned Copper Braid

The shield is the hero of this product. We use a tinned copper braid with high coverage. The transfer impedance is very low (max 250 Ohm/km at 30 MHz). This is a fancy way of saying it blocks high-frequency noise very well. If you run this cable next to a high-voltage power line, your control signals stay safe. The braid is connected to a drain wire. This makes grounding very easy. You do not need to fiddle with the mesh. Just connect the drain wire to the earth terminal.

Full Technical Specifications Table

Here is the hard data. You can compare this directly with the ÖLFLEX CLASSIC 110 CY datasheet.

Where should you use this cable?

You might ask, “Is this cable right for my project?” If you need reliability, the answer is yes. This cable is a workhorse. It fits many roles.

Industrial Automation and Robotics

This is the home of the 12-core cable. Use it to connect PLCs (Programmable Logic Controllers) to I/O modules. Use it for sensor networks. Use it in robot arms. The flexibility allows the robot to move without the cable snapping. The shield prevents the robot’s motor noise from messing up the sensor data.

Building Management Systems (BMS)

Use this for HVAC control. Connect thermostats, dampers, and actuators. The cable is small (only 9-11mm wide). You can pull it through walls easily. The transparent sheath helps the electrician identify the wires behind the drywall without stripping them first.

Outdoor and Wet Locations

The PVC sheath is water-resistant. The tinned copper shield prevents corrosion from rain or humidity. Use it for outdoor lighting control, security cameras, or irrigation systems. The UV resistance means the sun will not crack the jacket quickly.

Audio and Data (Low Voltage)

While not a dedicated Ethernet cable, the 0.5 sq mm cores can carry data for RS485 or similar protocols. The low capacitance of the shield helps maintain signal integrity over distance.

Why buy this German-standard cable from us?

You have options. You can buy cheap local cable. Or you can buy this premium equivalent. Here is why this choice saves you money in the long run.

Less Downtime

Cheap cables fail. They short out. They corrode. When a cable fails, you stop the line. You pay for labor to find the fault. You pay for a new cable. Our cable is built to VDE standards. It is tested for 5000 torsion cycles. It will not fail in a standard environment.

Faster Installation

Time is money. The numbered cores and transparent sheath cut installation time in half. Your electricians do not need to use tone generators to find wire pairs. They see them. They connect them. They move to the next job.

Compliance and Safety

This cable is flame retardant (IEC 60332-1-2). If a fire starts, the cable does not spread the flame. This is often a requirement for insurance and building codes. It is also RoHS compliant. It does not contain banned hazardous substances. You can sell your machinery globally without worrying about chemical restrictions.

Packaging and Logistics

We know you are a trading company. You need reliable logistics.We pack this cable in sturdy coils or drums. The standard length is 100 meters per coil. This fits perfectly in shipping containers. The total weight is about 20-22 kg per 100 meters. This is light enough for air freight if you need it urgently, but cost-effective for sea freight.We can do OEM. If you want your brand printed on the transparent sheath, we can do it. We can also customize the length. Need 50 meters? 200 meters? Just ask.

Don’t settle for “good enough.” Get the best.

You are looking for a specific product: “Imported 12-core 0.5 sq mm shielded cable with tinned copper mesh and transparent outer sheath, German cable brand, PT110CY 12G0.5.” You know what quality looks like. You know that cheap imitations will cost you more later.We have the stock. We have the specs. We have the quality that matches the German giants but at a price that makes sense for your business. Do not guess on your next project. Use the cable that professionals trust.Ready to get a quote?Send us your inquiry today. Tell us the quantity you need. Tell us where it is going. We will send you a price within 24 hours. Let us build a long-term partnership based on quality and trust. Click the “Request a Quote” button now. Your next installation will be easier, faster, and more reliable.