German Standard 110CY 2×1.5mm² Shielded Control Cable – Flexible Copper Conductor PVC/LSZH Jacket for Industrial Automation & Audio Systems

Description

Is electrical noise killing your equipment efficiency?

You run a factory or a building automation system. Everything looks good on paper. But then, the sensors start acting crazy. The audio system has a buzz. The CCTV screen has lines running through it. You check the connections, and they are tight. The problem is not the connection. It is the invisible enemy: Electromagnetic Interference (EMI).You are using standard cables. They act like antennas. They pick up noise from motors, power lines, and radio waves. This noise corrupts your data. It causes errors in your control systems. It ruins the sound quality in your audio setup. Worst of all, cheap cables crack in the sun or melt in the heat. You end up replacing them every year. That costs money and downtime.You need a cable that fights back. You need the German imported 110CY 2-core 1.5mm² shielded power control cable. This is not just a wire. It is a shield for your signals. It uses high-density copper braiding to block noise. It uses flexible PVC or LSZH jackets to survive harsh environments. This cable is the standard for engineers who refuse to compromise.


What makes the 110CY 2×1.5mm² cable special?

This cable follows the German VDE standard. It is built for tough jobs. Let’s look at the inside.

The Heart: Pure Copper Conductor

The core of the wire is copper. Not aluminum. Not copper-clad steel. We use solid or stranded bare copper according to Class 5 of BS EN 60228. Why? Because copper has low resistance. It lets electricity flow easily. It does not get hot when you push current through it. For a 1.5mm² size, this wire handles power and signals better than thinner cables. It stays flexible even in cold weather. You can bend it around corners without breaking it.

The Armor: EMI Shielding

This is the key feature. The “shielded” part. We wrap the copper cores in a shield. Usually, it is a braid of copper wires plus an aluminum foil. This shield acts like a cage. It catches outside noise and drains it to the ground. It stops the noise from getting into your signal wires. It also stops your signal from leaking out. This is critical for data cables and audio cables. Tests show this setup reduces interference by over 95%. If you have sensitive equipment, this shield is a must-have.

The Skin: Insulation and Jacket

We use two layers of protection.First, the insulation around each copper core. We use PVC (Polyvinyl Chloride). It is flame retardant. If there is a fire, it does not spread easily. We also offer XLPE for higher heat resistance.Second, the outer jacket. This protects against the world. It resists oil, acid, and UV rays. If you use LSZH (Low Smoke Zero Halogen) material, it is safe for indoor use. It does not produce toxic smoke when burned. This is required in hospitals, schools, and subways.


Technical Specifications Table

Here are the hard numbers. You can compare these with your current supplier.

FeatureSpecificationBenefit
Model110CY / Liycy (German Standard)High quality, VDE certified
Cores2 Cores (2×1.5mm²)Perfect for power + signal or stereo audio
ConductorBare Copper (Class 5 Stranded)High flexibility, low resistance
InsulationPVC or XLPEHeat resistant up to 70°C (PVC) or 90°C (XLPE)
ShieldingCopper Braid + Aluminum FoilBlocks electromagnetic interference (EMI)
Voltage Rating300/500V (U0/U)Safe for most low voltage control circuits
Outer JacketPVC, PVC/SWA, or LSZHWaterproof, UV resistant, or Fire safe
TemperatureInstall: 0°C to +50°C / Operate: -30°C to +70°CWorks in freezers or hot attics
Bending Radius12x Cable Diameter (Armored)Easy to route in tight spaces
CertificationsVDE, CE, RoHS, ISO9001Passes European export standards

Where can you use this cable?

This 2-core 1.5mm² cable is a workhorse. It fits many scenes. Here are the top places we see it used.

Industrial Automation and Robotics

Factories are noisy places. Motors and welders create huge magnetic fields. If your control cable is not shielded, the PLC (Programmable Logic Controller) gets wrong data. The robot arm might crash. Using this shielded cable keeps the data clean. It connects sensors, servo motors, and control panels safely. It resists oil and coolant spills on the factory floor.

Building Management Systems (BMS)

Modern buildings are smart. They have cameras, door locks, and fire alarms. All these devices talk to a central computer. This cable is perfect for:

  • CCTV systems: Prevents video signal loss.
  • Access control: Powers the lock and sends the “open” signal.
  • Fire alarms: The shielded version ensures the alarm triggers even with heavy electrical noise nearby.
  • Audio/Intercom: Clear voice quality without buzzing.
Audio and Broadcast Equipment

High-end audio hates noise. A tiny bit of EMI creates a “hum” in the speakers. The 110CY cable is famous in the audio world. It is used for connecting amplifiers to speakers. It is used in recording studios. The tight copper braid shields the delicate analog signals. It keeps the sound crystal clear.

Renewable Energy and Solar

Solar panels need to talk to the inverter. They are outside 24/7. The sun burns standard plastic. Rain gets in. This cable has a UV-resistant jacket. It handles the heat on a roof. It connects the solar charge controller to the battery bank reliably.


Why buy the German Standard 110CY version?

You might see cheaper cables from other markets. But “cheap” often means “no shield” or “aluminum conductor.” Aluminum breaks easily. It corrodes when it touches copper. A cable without a shield is just a noise collector.The German 110CY standard (similar to VDE 0816) is strict. It demands:

  1. Consistent diameter: The cable is round and true. It fits connectors perfectly.
  2. Thick shielding: We do not skimp on the copper braid coverage. It is usually above 85% coverage.
  3. Real copper: We test the conductivity. You get what you pay for.
  4. Safety: The PVC jacket passes the flame test. It self-extinguishes.

When you buy this cable, you are buying peace of mind. You are buying a cable that lasts 10 years, not 1 year. You avoid the cost of troubleshooting “ghost” electrical problems.


Packaging and Shipping Details

We know you need this cable fast and in good shape.

  • Packaging: We use strong wooden drums or coils. For small orders, we use cartons with stretch film.
  • Lengths: Standard coils are 100m, 305m (1000ft), or 500m. We can cut to your exact length.
  • MOQ: For standard types, we accept 1000 meters. For customized colors, we discuss case by case.
  • Shipping: We ship by sea (FCL/LCL) or air for urgent samples. We handle the export paperwork (CE, RoHS, MSDS).

Frequently Asked Questions

Q: Can I use this cable for 240V AC power?A: No. This cable is rated for control circuits, usually up to 300/500V for signals, but it is not designed for main power lines. For power, you need a thicker cable (like 2.5mm² or 4mm²) or a specific power cable.Q: What is the difference between PVC and LSZH jacket?A: PVC is strong and cheap. But when it burns, it makes black smoke and acid gas. LSZH (Low Smoke Zero Halogen) is more expensive. When it burns, it makes very little smoke and no toxic gas. Use LSZH in tunnels, airports, and subways.Q: Do you provide samples?A: Yes. We can send you a 10-meter sample for testing. You pay the freight, but the sample is free if you have a DHL/FedEx account.Q: Can you put my brand name on the cable?A: Yes. We do OEM. We can print your logo on the jacket every meter. We also make custom colors (like blue, red, or yellow) for identification.


Ready to stop the noise?

Don’t let signal interference ruin your project. Get the cable that engineers in Germany and Europe trust. The 110CY 2-core 1.5mm² shielded cable is in stock and ready to ship.We offer competitive prices for bulk orders. Our quality control team tests every drum before it leaves the factory. We guarantee the copper purity and the shielding coverage.Email us today for a free quotation. Tell us your voltage needs, jacket preference (PVC or LSZH), and quantity. We will reply within 12 hours with a detailed offer and datasheet PDF.Click “Send Inquiry” now. Let’s build something reliable together.