Is Your Cable Breaking Down in the Drag Chain?
You know the problem. Your machines run perfectly. But suddenly, the control system stops. You check the wiring, and the cable is cracked. The copper is exposed. Oil has leaked into the insulation. Or the signal is messy because of interference. This causes expensive downtime. You need a cable that moves millions of times without failing. You need a cable that resists oil, cutting fluids, and sharp bends. Our German-engineered 24-core 0.5 square millimeter cable is the solution. It is built for the toughest industrial environments. It uses high-quality PUR material. It is flexible, strong, and ready for work.
Why This 24-Core Cable is Different
This is not a standard wire. It is a specialized high flexibility extension cable. We designed it for drag chain applications. The outer jacket is made from PUR (Polyurethane). PUR is much better than PVC. Why? Because PUR resists oil and grease. It also resists cutting fluids. Many factories use cheap cables that get hard and crack in oil. This cable stays soft. It bends easily. It has a small bending radius. You can fit it into tight spaces inside your machine. The 24G 0.5 oil-resistant and bend-resistant drag chain design means it lasts longer. It handles constant motion without breaking the copper strands inside.
Technical Specifications You Can Trust
We believe in transparency. Here are the hard numbers for this cable:
- Conductor: 24 Cores (pairs or individual wires).
- Cross-Section: 0.5 square millimeters (approx. 20-21 AWG).
- Material: Bare copper or tinned copper (for anti-corrosion).
- Insulation: Special PUR mix for high flexibility.
- Sheath/Jacket: PUR (Purple or Black, depending on batch).
- Shielding: Braided shield (Copper or Aluminum) + Aluminum foil.
- Rated Voltage: 300V / 500V (For control signals, not main power).
- Test Voltage: Up to 2500V.
- Temperature Range: Fixed: -40°C to +70°C. Moving: -20°C to +60°C.
- Bending Radius: Minimum 7.5x to 10x cable diameter (very flexible).
- Bending Cycles: Over 2 million cycles in tests.
- Flame Test: UL VW-1 / FT1 vertical flame test passed.
- Approvals: RoHS compliant, CE, UL style recognized (similar to AWM 20236).
Built for the Harshest Environments
Your factory floor is tough. There is oil, metal chips, and constant vibration. This cable handles it all. The PUR jacket protects against mechanical stress. It is abrasion-resistant. If the cable rubs against the metal chain link, it does not wear out fast. The oil resistance is critical. In hydraulic systems or near motors, oil leaks happen. Standard rubber cables swell up and fail. This cable does not. It keeps its shape. It keeps the signal safe. The shielding is also key. In a factory with many motors and VFDs, there is electromagnetic interference (EMI). Without a shield, your sensor data gets noise. This noise causes errors. Our braided shield blocks the noise. It ensures clean data transmission for your PLC and servo drives.
Where to Use This Cable
You can use this cable in many places. It is perfect for industrial automation. Here are the top use cases:
- Robot Arms: The cable goes inside the robot arm joint. It moves constantly. It needs to be light and flexible.
- CNC Machines: For signal control between the controller and the spindle or tool changer.
- Drag Chains: Specifically for energy chains that move back and forth all day.
- Conveyor Systems: For sensors and limit switches on moving lines.
- Elevators and Lifts: For control signals in the shaft.
- Outdoor/Wet Areas: The PUR jacket is water-resistant and UV stable (for short term exposure).
It is a direct replacement for expensive German brands like Weidmüller SAIH-PB or Helukabel JZ-500 series. You get the same quality at a better price.
Quality You Can See and Feel
We do not cut corners. The copper conductor uses fine wires. This makes the cable very flexible. It is not stiff like a solid wire. The insulation has a smooth finish. It does not snag on the drag chain. The print on the jacket is clear. It shows the core count and size. This helps your technicians install it fast. We test every batch. We check the resistance. We check the insulation strength. We do a bend test. If it does not meet the German standards, we do not ship it. We want you to trust us for your next big project.
Get Your Custom Quote Today
Do not wait for your current cable to fail. Downtime costs more than the cable itself. We have this German imported 24-core 0.5 square millimeter cable in stock. We can cut it to your exact length. We can add connectors if you need them. We ship worldwide. Our team speaks English. We will answer your technical questions fast.Ready to order?Send us an inquiry now. Tell us the length you need. Tell us if you need shielded or unshielded. We will send you a competitive quote within 24 hours. Protect your machines with the best cable. Click the “Contact Supplier” button now. Let’s get your production line running smoothly.