Is Your Machine Cable Failing You? Stop the Downtime Now.
You know the feeling. You are in the middle of a big job. The machines are humming. Then, suddenly, a control cable cracks. The system stops. Your team is waiting. You lose money every minute the line is down.Cheap cables cause big problems. They get stiff in the cold. They crack when they touch oil. They burn too fast in a fire. You need a cable that works as hard as your machines do. You need a cable that bends, twists, and lasts.This is not just a wire. This is the ÖLFLEX® CLASSIC 110. It is built for the real world. It handles oil, water, and rough handling. It is the German-made solution for your power tools and machine tools. Let’s look at why this specific cable, part number 1119804, is the right choice for your factory.
What Exactly is the 1119804 Cable?
This is a 4-core power and control cable. Each core has a cross-section of 0.75 square millimeters. The part number is 1119804. It is part of the Lapp Group’s ÖLFLEX® CLASSIC 110 series.Lapp is a top German brand. They make cables that last. This cable has a grey PVC outer sheath. The color code is RAL 7001. Inside, you have four copper conductors. They are insulated and sheathed in PVC.This cable is VDE registered. That means it meets strict German safety standards. It is also tested for oil resistance. If your machines leak oil or hydraulic fluid, this cable will not rot. It is perfect for fixed installation. It is also great for occasional movement. But do not use it for constant dragging without a chain.
Technical Specs You Need to Know
Here are the hard numbers. We keep it simple so you know exactly what you are buying.
Physical Details
- Part Number: 1119804
- Cores: 4 (4-core)
- Conductor Size: 0.75 mm²
- Outer Diameter: 6.2 mm (about 0.24 inches)
- Weight: 66 kg per kilometer (about 0.15 lbs per foot)
- Sheath Color: Grey (RAL 7001)
- Conductor Color: Black with white numbers
- Grounding: This specific version does NOT have a Green/Yellow protective conductor
Electrical Limits
- Voltage: U0/U is 300/500 Volt
- Test Voltage: 2500 Volt
- Bending Radius: Fixed: 4 times diameter (24.8 mm). Moving: 8 times diameter (49.6 mm)
Temperature Range
- Operating: -40°C to +80°C
- Installation: Minimum -5°C (to avoid cracking)
Why It Beats Cheap Alternatives
You can buy cheap cable from anywhere. But here is why this German-made cable saves you money in the long run.
It Loves Oil (And Hates Water)
Your factory has oil. It has coolant. It has water. Standard PVC cables get soft and mushy when they touch oil. They swell up and fail.The ÖLFLEX® CLASSIC 110 is different. It is oil-resistant according to DIN EN 50290-2-22. It is also tested to UL OIL RES I and UL OIL RES II. You can wash it down. You can wipe off the grease. The cable stays strong.
It Stops Fires
Safety is not a joke. If a short circuit happens, you do not want the cable to burn like a torch. This cable is flame retardant. It meets IEC 60332-1-2 standards. It does not spread fire. This keeps your building and your people safe.
It Stays Flexible in the Cold
Some cables turn into rocks in the winter. If your warehouse gets cold, a stiff cable is hard to route. This cable stays flexible down to -40 degrees Celsius. You can install it in cold storage or outdoor units without worrying about cracks.
Chemical Resistance
Factories use chemicals. Cleaning agents. Acids. Bases. This cable resists most chemicals. It is built for sewage works, composting plants, and the chemical industry. It does not degrade easily.
Where Should You Use This Cable?
This cable is a workhorse. You will see it everywhere in industry. Here are the best spots for it:
Machine Tools and CNC
This is the #1 use. Connect your servo motors, sensors, and control panels. It handles the vibration of the machine. It resists the coolant splashing on it.
Power Tools and DIY Machines
If you build machines, use this cable. It is great for drill presses, saws, and sanders. It is tough enough for daily use.
Household Appliances
You can use it inside washing machines, dryers, and heaters. It handles the heat and the movement inside the device.
Damp and Wet Rooms
Do you have a basement workshop? A wet room? This cable is suitable for damp places. It is not fully waterproof for direct burial, but it handles humidity very well.
Public Buildings and Airports
Because it is flame retardant and low-smoke, it is used in airports, stations, and hospitals. It meets strict building codes.
How to Order and Handle
We sell this cable in practical lengths. It is not always a 1000-meter drum.
- Cut to Length: You can order 10 meters, 20 meters, or 100 meters.
- Packaging: We ship it in coils or drums to prevent kinks.
- Storage: Keep it in a dry place. Avoid direct sunlight for long periods.
- Installation: Use standard cable glands. Make sure the bending radius is not too tight. Give it room to move if it is a moving part.
The Bottom Line: Why Buy This?
You have a choice. You can buy a generic cable that might fail in six months. Or you can buy the Lapp 1119804.This cable is consistent. Every meter is tested in Germany. You get the same quality from the first meter to the last. It has a copper index of 28.8 kg/km. That means you are getting real copper, not cheap aluminum mixed with copper.It is certified. It has the VDE mark. It passes the tough tests. When you install this, you install it once and forget about it. It just works.
Get Your Quote Today
Do not wait for your cables to fail. Upgrade to the best. We have stock of the 1119804 part number ready to ship.Whether you need 10 meters for a prototype or 1000 meters for production, we can help. Send us your inquiry now. Tell us the length you need. We will give you a competitive price with fast shipping.Click the “Request Quote” button. Let’s get your machines running smoothly with the right cable.