Is Your Production Line Stopping Because of Cheap Cables?
You know the feeling. It is 2 PM on a Tuesday. Your CNC machine is running a complex part. Suddenly, the screen goes black. The spindle stops. You check the connections and see the cable has cracked again. The oil on the floor confirms it. The cheap cable you bought could not handle the environment. Now you are looking at hours of downtime. You are losing money every minute the machine is silent. Your maintenance team is tired of fixing the same wire over and over. You need a cable that works as hard as you do. You need a cable that resists oil, moves freely, and carries power without failing. This is not just a wire. It is the lifeline of your machine.
What Makes This 12-Core Cable Special?
This cable is built for the real world of a factory floor. It is not a standard wire you find in a local shop. This is a German-engineered machine tool control cable. The part number 1119862 identifies a specific high-quality standard. It has 12 cores inside. Each core is 1 square millimeter in size. This size is perfect for carrying control signals and low-voltage power. The “12×1” marking means it has twelve conductors, each with a 1mm² cross-section.The material is key. We use high-purity soft copper for the core. Why soft copper? Because it is flexible. Hard copper breaks when you bend it. Soft copper bends thousands of times without snapping. This is vital for moving parts like drag chains on a CNC machine. The outer jacket is a special PVC or PUR compound. It is designed to be oil-resistant. Machine oil, cutting fluid, and coolant will not eat through this jacket. It also resists abrasion. If the cable rubs against the steel machine bed, it will not wear down quickly.
Technical Specifications You Can Trust
We believe in being honest about what we sell. Here are the real numbers for this cable. You can compare these to your current supplier.
Electrical and Physical Data
- Conductor Material: Annealed fine copper wire (soft copper)
- Conductor Size: 1.0 mm² (12 cores)
- Number of Cores: 12
- Conductor Resistance: Less than 19.5 Ohm/km (at 20°C)
- Insulation Material: PVC or PUR (Polyurethane)
- Sheath Material: Oil-resistant PVC/PUR blend
- Color Code: Black cores with white numbering (0-9) and Green/Yellow for ground
- Rated Voltage: 300V / 500V (For control circuits)
- Test Voltage: 2000V
- Temperature Range: Fixed: -40°C to +70°C | Moving: -5°C to +70°C
- Bending Radius: 6 times the cable diameter (fixed) / 10 times (moving)
- Oil Resistance: Resistant to mineral oils, coolants, and cutting fluids
- Flame Retardant: Self-extinguishing (IEC 60332-1)
- Certification: CE, RoHS, ISO 9001 compliant
Where Should You Use This Cable?
This wire is not for your house lighting. It is for heavy industry. Specifically, it shines in CNC (Computer Numerical Control) environments.
CNC Machine Tools
If you have a lathe, a milling machine, or a machining center, this is the perfect fit. The model VMC-1270DL3 mentioned in industry catalogs uses cables just like this. It connects the control panel to the servo motors and sensors. The 12 cores allow you to send power and multiple control signals through one single wire. This keeps your machine wiring clean and organized.
Robot Arms and Automation
Industrial robot arms move constantly. Their cables face millions of bending cycles. Standard wires crack under this stress. This soft-core cable is designed for “high flex” applications. It can move inside cable carriers (drag chains) without breaking the copper inside.
Semi-Conductor and Food Processing
In clean rooms or food processing, you need cables that do not leak and are easy to clean. The smooth, oil-resistant jacket prevents dirt from sticking. It is also resistant to chemicals used for cleaning.
Why Buy German Imported Quality?
You might see cheaper cables from other markets. But “cheap” often costs more in the long run. German engineering focuses on longevity and precision.
Consistency is King
When you buy this cable, every meter is the same. The copper purity is consistent. The insulation thickness is exact. This means your electrical resistance is predictable. Your machine controller will not get confused by voltage drops. Cheap cables have “hot spots” where the copper is thin. This causes overheating.
Real Oil Resistance
We tested this. We soaked samples in hydraulic oil and heated them. Cheap cables got sticky and cracked. This cable stayed flexible. The jacket did not swell or peel. In a shop where oil mist is in the air, this is the only way to survive.
Better Shielding Against Noise
Factories are noisy places electrically. Motors and welders create electromagnetic interference (EMI). If your control cable is not shielded well, your machine might glitch. It might move when it should stop. While this specific model focuses on power and control, the twisted pair construction (in similar variants) helps cancel out noise. It ensures the signal from the controller reaches the motor perfectly.
How to Install and Maintain
You do not need a PhD to install this, but you should follow basic rules to get the 10-year lifespan we promise.
Bending Rules
Never bend the cable sharper than its radius. If the cable is 10mm thick, do not bend it in a 5mm curve. Use cable guides to support the wire when it moves. Let it hang in a “U” shape, not a “V” shape. This reduces stress on the core.
Stripping and Connecting
Use proper wire strippers. Do not nick the copper strands. If you cut even 10% of the strands, the cable might overheat. Use ferrules (cord ends) on the tips. This keeps the strands together and makes a solid connection in the terminal block.
Storage
Keep the cable reels in a cool, dry place. Do not leave them in the hot sun. UV rays can damage the black jacket over time. If the cable is cold (below 0°C), let it warm up before installing. It becomes brittle when frozen.
Frequently Asked Questions
Can I use this for high-speed data like Ethernet?
No. This cable is for power (24V or 110V) and low-speed control signals (sensors, relays). It is not a Cat5 or Cat6 data cable. For high-speed internet or Profinet, you need a shielded twisted pair data cable.
Is the ground wire included?
Yes. In a 12-core cable, usually one core is Green/Yellow. This is the Protective Earth (PE). Always connect this to the machine chassis for safety.
How long is the delivery time?
Since this is a specialized import, we usually ship within 30 days after payment. We keep stock of common lengths, but custom lengths need time for production and testing.
What is the minimum order quantity?
For stock items, we can do small orders (even 1 piece). For custom printing or specific lengths, the MOQ might be 100 meters. Contact us for details.
Don’t Let a Bad Cable Ruin Your Day
Imagine your machines running smoothly for years. No surprise stops. No emergency calls to the electrician at 2 AM. You get this peace of mind by using the right parts. This German imported 12-core 1mm cable is that part. It is the difference between a frustrating shift and a productive one.We have sold thousands of meters of this cable to factories in Europe and North America. They come back because it works. It is soft enough to bend, tough enough to resist oil, and reliable enough to power your most expensive machines.You have the specs. You know the pain of failure. Now make the smart choice.Ready to upgrade your wiring? Send us an inquiry today. Tell us the length you need and your destination port. We will send you a competitive quote within 24 hours. Do not wait for the next breakdown. Fix it before it happens.Inquiry Now & Get a Sample!Email: mailto:sales@yourcompany.comWhatsApp: +86-185-xxxx-xxxx