Is Your Production Line Stopping Because of Broken Cables?
You know the feeling. The machine stops. The alarm rings. You check the control cabinet and find a cracked cable. Oil has leaked onto the wires. The copper is stiff and broken from moving back and forth. This costs you money every minute. You need a cable that moves like a snake but is tough like armor. You need a cable that does not get hard in oil. You need the German 12-core 0.5mm² flexible control cable from the 110 series. It is built for the toughest jobs. It bends millions of times. It resists oil and chemicals. It keeps your factory running smooth.
What Makes This 12-Core Cable Special?
This is not a standard wire you buy at a local shop. This is a precision German engineering product. The part number 1119012 identifies a specific high-performance cable. It has 12 cores inside. Each core is 0.5 square millimeters. This size is perfect for control signals, sensor data, and low-voltage power.The “110 series” means it is designed for high flexibility. We call this “Class 5” flexible copper. The wires are made of many tiny thin strands twisted together. This makes the cable very soft. You can bend it in tight spaces. It does not break when you twist it. It is ideal for moving parts.
Technical Specs You Need to Know
Here are the hard numbers for your engineer:
- Cores: 12 Cores (12 x 0.5 mm²)
- Voltage: 300/500 Volts (0.6/1 kV)
- Conductor: Bare copper, Class 5 flexible stranding (EN 60228)
- Insulation: PVC or PUR (Polyurethane) options
- Sheath: PVC or PUR, oil-resistant
- Temperature: Fixed -40°C to +80°C / Moving -5°C to +80°C
- Bending Radius: 6x to 10x cable diameter (very flexible)
- Standards: ISO 9001, CE, RoHS, VDE tested
- Application: Drag chains, CNC machines, robot arms, conveyor belts
Why “Oil-Resistant” Matters for Your Machine
You work in a factory. There is oil, grease, and coolant everywhere. Standard PVC cables get sticky in oil. The plastic swells. The insulation fails. Then you get a short circuit.This cable uses special PUR or high-grade PVC. We use materials that laugh at oil. The sheath does not absorb oil. It stays flexible even when covered in grease. This is critical for CNC machine tools and hydraulic systems. If your cable is in a wet or oily place, this 110 series cable is the right choice. It resists micro-organisms too. It will not rot in dirty environments.
Perfect for Drag Chains and Moving Parts
Does your cable move? If yes, you need a “high flex” cable. Standard cables crack after 100,000 moves. This German cable lasts for millions of cycles. It is designed for cable carriers (drag chains).Imagine a robot arm moving all day. The cable at the elbow bends 100 times a minute. A stiff cable breaks in a week. This flexible cable moves with the arm. It does not fight the movement. It has a high tensile strength. The drag chain pulls it, but it does not stretch or snap. It is also lightweight. This reduces the load on your servo motors.
Compare with Cheap Alternatives
You can buy cheap Chinese cables for half the price. But let’s look at the real cost.Cheap cables use recycled copper. They break easily. They have no shielding. They cause signal errors. Your machine stops. You pay a technician 100anhourtofixit.Thecheapcablecost50. The downtime cost $1000.Our German 110 series cable costs more upfront. But it works for 5 years without stopping. It has better shielding against noise. Your sensors work correctly. Your machine runs faster. You save money in the long run. It is an investment, not just a cost.
Where to Use This Cable (Real Scenarios)
You can use this wire in many places. Here are examples:
- CNC Machines: Connect the control panel to the spindle.
- Robotics: Wiring for the gripper and sensors.
- Conveyor Belts: Power and signal for the motor.
- Packaging Machines: For the moving heads and cutters.
- Elevators and Lifts: For the car control signals.
- Renewable Energy: Solar tracker systems that move with the sun.
If you have a moving part that needs 12 signals or power lines, this is the cable.
We Have Stock and We Ship Fast
We know you need this cable now. You do not want to wait 4 weeks for shipping from Germany. We have a warehouse with over 33,000 products. This 12-core 0.5mm cable is in stock.We ship worldwide. We use DHL, FedEx, or air freight. We pack the cable on wooden drums or strong coils. It will not get damaged in transit. We can cut it to the exact length you need. Do you need 50 meters or 5000 meters? We handle both.
How to Order and Get a Quote
Do not guess the price. Prices change with copper market rates. Send us an inquiry today. Tell us:
- The length you need (in meters or feet).
- The jacket material (PVC for general use, PUR for heavy oil/outdoor).
- Your shipping address.
We will send you a quote in 24 hours. We offer a warranty. If the cable is defective, we replace it. We are a trading company in Shanghai, but we source directly from the German factory. You get German quality with Chinese service speed.Ready to stop cable failures? Click “Send Inquiry” now. Let’s get your machines running smoothly with the best cable in the world.