Tired of hum, buzz, and signal loss in your audio setup?
You know the feeling. You buy cheap cable to save money. But then you hear it. That annoying low-frequency hum. Or maybe high-pitched static when you move the wire. It ruins your recording. It kills the vibe in your live sound setup. And if the cable is stiff like a rock, it is a nightmare to route through tight spaces in a studio wall or a car dashboard.We fix this. We build a cable that fights noise. It stays flexible even in cold weather. And it carries your signal clean from point A to point B. No ghosts. No buzz. Just pure sound.
What makes this cable different?
This is not just a piece of wire. It is a system designed to protect your audio signal. We use a twisted pair structure. This means two wires twist around each other. Why? Because this simple trick cancels out electromagnetic interference (EMI) and radio frequency interference (RFI).But we do not stop there. We add a shield. We wrap the twisted pair in an aluminum mylar foil. This foil acts like a armor. It blocks outside noise from hitting your signal wires. We also add a tinned copper drain wire. This wire connects the shield to the ground. It drains away the noise so it does not affect your sound.The conductor is tinned copper. Why tinned? Because bare copper oxidizes over time. Oxidation creates resistance. Resistance kills high frequencies. Tin plating stops this. It keeps the connection crisp and clear for years. The conductor size is 28 AWG or 26 AWG. This is the sweet spot. It is thin enough to be flexible, but thick enough to carry the signal without loss over long distances (up to 50 meters in open air).The jacket is PVC, but we use a special mix. It is soft to the touch. You can bend it, twist it, and coil it up. It will not crack. It is perfect for patch bays, pedal boards, and tight studio racks.
Technical Specs You Can Trust
We believe in transparency. Here are the hard numbers for our standard dual-channel audio cable:
- Conductor Material: Tinned Copper (OFC available on request)
- Conductor Size: 28 AWG (7×36 strands) or 26 AWG (7×32 strands)
- Cross-Sectional Area: 0.14 mm² (approx 26 AWG) or 0.1 mm² (approx 28 AWG)
- Number of Cores: 2 Cores (Dual Channel)
- Structure: Twisted Pair with Overall Shield
- Shielding: Aluminum Mylar Foil + Tinned Copper Braid (Optional)
- Drain Wire: 26 AWG Tinned Copper
- Insulation: PE or PVC (Low noise dielectric)
- Jacket Material: Flexible PVC (CMG/FT4 rated available)
- Jacket Color: Black, White, Grey, or Custom
- Outer Diameter: Approx 3.0mm – 4.0mm (depends on jacket thickness)
- Impedance: 55 Ohms (typical for audio)
- Capacitance: < 45 pF/ft (conductor to shield)
- Temperature Range: -20°C to +75°C
- Voltage Rating: 300V
- Packaging: 100m, 305m (1000ft) reels or custom cut lengths
Where to use this cable?
This cable works hard. You will find it in places where signal quality matters most.Studio and RecordingConnect your microphones to the preamp. Run your balanced line-level signals between outboard gear. The twisted pair design stops crosstalk. This means your vocal mic won’t pick up the noise from the drum machine cable next to it.Live Sound and BroadcastOn stage, there is a lot of electrical noise. Dimmer packs, LED screens, and Wi-Fi signals are everywhere. Our shield blocks this out. It keeps your audio clean even in a messy RF environment. It is also lightweight, which is great for touring rigs where every ounce counts.Home Hi-Fi and Car AudioYou want your music to sound right. Not muddy. This cable preserves the dynamic range. In car audio, it resists the heat and vibration. The flexible jacket makes it easy to snake through door jambs and dashboards without kinking.Instrument Cables (DIY)Many guitarists and bassists build their own pedal boards. They need bulk cable to make custom patch cables. Our 2-core cable is perfect for this. It is easy to solder (thanks to the tinned copper) and it handles the mechanical stress of being stomped on.
Why buy from us?
We are a factory, not just a trader. We control the quality from the copper wire draw to the final jacket extrusion.Strict Quality ControlEvery batch gets tested. We check the conductor resistance. We test the shield coverage. We make sure the twist pitch is consistent. If it does not meet our spec, we reject it.Customization is EasyNeed a different color? We can do that. Need a special jacket material like Low Smoke Zero Halogen (LSZH) for public buildings? We can source it. Need a different AWG size? We have the machines to make it. We can even print your logo on the jacket.Fast Shipping, No HassleWe know you need this cable for your production line. We keep stock of popular specs. We can ship via air or sea. We handle the export paperwork so you do not have to.Competitive PricingBecause we make it ourselves, we cut out the middleman. You get a factory-direct price. This gives you a better margin when you sell it to your customers.
Ready to upgrade your cable game?
Do not let bad cables ruin your reputation. Give your customers the sound quality they deserve. Whether you need 100 meters for a project or 10,000 meters for a container, we can handle it.Send us an inquiry today. Tell us your specs. We will send you a quote within 24 hours. Let us build the perfect audio cable for you.Click “Send Inquiry” now and let’s get started.