Stop Losing Video Signal Because of Cheap Cables
You know the feeling. You set up a camera, connect it to a monitor, and the screen looks fuzzy. There are “ghost” images, or the color looks washed out. Maybe you see black bars rolling across the screen. This happens because your cable is not good enough. Cheap cables let noise in. They lose signal over distance. If you are doing professional work, you cannot use cheap wire. You need a cable that keeps the signal strong from the camera to the screen. You need a cable that works the first time, every time. This is where the CANARE L-3D2V comes in. It is built for real work. It stops interference. It gives you a clear, sharp picture without ghosting or noise.
What is the CANARE L-3D2V Cable?
The CANARE L-3D2V is a professional 75-ohm coaxial cable. It is made in Japan with high standards. “75 ohm” is the magic number for video signals. It matches the impedance of almost all video gear. This means the signal travels smoothly without bouncing back. The “L-3D2V” name tells you about the build. It has a solid copper core. It has good shielding. This stops outside noise like lights or motors from messing up your video. We pre-assemble this cable with BNC connectors on both ends. You get a 3-meter cable ready to plug in. No crimping tools needed. No soldering needed. Just plug and play. It is perfect for standard definition (SD) and high definition (HD) video. It handles SDI signals very well for short to medium runs.
Technical Specs You Need to Know
Here are the hard numbers for the engineers and techs. This cable is built to last and perform.
- Product Name: CANARE L-3D2V
- Cable Type: 75 Ohm Coaxial Cable
- Length: 3 Meters (approx. 9.8 feet)
- Connector A: BNC Male (Crimp Type)
- Connector B: BNC Male (Crimp Type)
- Impedance: 75 Ohms (Strict tolerance)
- Center Conductor: Solid Copper (High conductivity)
- Shielding: Double Shield (Foil + Braid)
- Jacket Material: PVC (Durable and flexible)
- Jacket Color: Black (Standard)
- Frequency Range: Works up to 3 GHz (Great for HD-SDI)
- Return Loss: Better than 20 dB (Low signal reflection)
- Operating Temp: -20°C to +60°C
Why Use BNC Connectors?
BNC is the king of video connectors. You see them in TV studios, hospitals, and security centers. Why? Because they lock in place. You twist the collar, and the cable stays put. It does not fall out if someone bumps the wire. This is a “crimp” type connector. We use special tools to squeeze the metal onto the cable. It creates a cold weld. This is stronger than soldering. It resists vibration. It resists pulling. The CANARE BNC plugs have gold pins. Gold does not rust. Even if you plug and unplug it 100 times, the connection stays tight. The metal body is nickel-plated. It looks good and fights corrosion. This is not a cheap connector that breaks in your hand. It is a professional tool.
Where Should You Use This 3-Meter Cable?
This cable is the perfect length for many setups. 3 meters is about 10 feet. It is long enough to reach from a desk to a floor, or across a small room. Here are the best places to use it:
- CCTV Security: Connect an analog camera to a DVR. Connect an HD-TVI or AHD camera to a monitor.
- Broadcast Studios: Patch between a camera and a viewfinder. Connect a video server to a switcher.
- Live Events: Link a projector to a video feed. Use it for confidence monitors on stage.
- Medical Imaging: Connect ultrasound machines or endoscopy cameras to screens.
- Education: Wire a classroom projector to a document camera or PC.
- House of Worship: Run video from a camera in the back to the projection booth.
In these places, you cannot afford a bad connection. This cable ensures the video is clean. It ensures the audio (if embedded) is in sync.
The “Pre-Assembled” Advantage
Making a coax cable is hard. You need to strip the jacket perfectly. You need to fold the braid back. If you make a mistake, the cable is trash. When you buy this pre-assembled cable, you skip the hard work. Our factory technicians build it. They use the CANARE TC-D5 crimp tool. This tool is made specifically for these connectors. It applies the exact right pressure. The result is a perfect connection every time. The strain relief boot protects the cable where it meets the plug. This stops the cable from snapping if it gets pulled. You save time. You save money on tools. You get a product that works out of the box.
Built to Survive Rough Use
Cables live a hard life. They get dragged through doors. They get stepped on. They get coiled tight. The CANARE L-3D2V jacket is tough. It is flexible in the cold. It does not get sticky in the heat. The connectors are metal, not plastic. Plastic cracks under stress. Metal bends but holds the pin in place. The shielding is 95% coverage. This means even if you run the cable next to a power cable, you won’t see “hum” bars on your video. It is a robust cable for a rough world.
Why Choose CANARE?
CANARE is not a budget brand. They are a top-tier Japanese manufacturer. They have been making cables for decades. Broadcasters trust them. The US military trusts them. Hospitals trust them. When you buy CANARE, you are buying peace of mind. You know the cable was tested. You know the materials are real copper, not cheap alloys. You know the specs are true. A cheap cable might say “75 ohm” but actually be 50 or 100 ohms. That ruins your signal. CANARE hits the spec every time.
Ready to Order? Get a Quote Today
We have this cable in stock. We can ship it fast. If you need 10 cables or 1000, we can handle it. We offer competitive pricing for bulk orders. Do not risk your project with a $2 generic cable. Use the gear the pros use.Click the “Get a Quote” button now. Tell us how many you need. We will send you a price within 24 hours. If you need a different length, like 5 meters or 10 meters, ask us. We can make custom lengths for you. Let’s get your video signal running perfectly.