Tired of hearing hum, buzz, and static in your professional audio setup?
You have expensive microphones, high-end preamps, and digital mixers. But if your cable is cheap, your sound gets ruined. Cheap cables let in radio interference and electrical noise. The sound becomes muddy. The highs disappear. You hear a “ground loop” hum that ruins the take. In a live show, a bad cable means dropouts and embarrassment. You need a cable that protects the signal. You need a cable built like a tank. You need the Brillion 1800B.
What makes the Brillion 1800B special?
This is not a generic patch cord. This is a professional digital audio cable designed for the real world. It is made in the USA. It uses a strict 110 Ohm impedance standard. This matches the AES/EBU standard perfectly. Why does this matter? Because when impedance matches, the signal travels clean. No reflections. No ghosting. Just pure audio data.The cable uses 24 AWG stranded tinned copper. “Tinned” means it resists corrosion. It lasts for decades. The conductor is solid but flexible. It does not break easily when you coil it up for storage.
The secret is in the shielding and insulation
Let’s look inside the jacket. You see a 100% aluminum foil shield. It covers the conductors completely. This is your force field against noise. It blocks RFI (Radio Frequency Interference) and EMI (Electromagnetic Interference). Whether you are on a busy stage or in a room full of Wi-Fi routers, your audio stays clean.The insulation is not cheap PVC plastic. It is cellular polyethylene foam. This sounds technical, but it is simple. Foam insulation keeps the capacitance low. Low capacitance means the cable can run long distances without losing the high frequencies. You can run this cable 100 meters or more and still get crystal clear sound at the other end. The jacket is PVC, but it is tough. It resists abrasion. It is safe for in-wall installation (CMR rated). It won’t crack in the cold or melt in the heat.
Perfect for AES/EBU and Digital Microphones
This cable is the industry standard for balanced digital audio. It is perfect for AES/EBU connections between your microphone and the preamp. It is also great for connecting digital mixers to speakers. If you use digital microphones that need phantom power, this cable handles it. The balanced design cancels out noise. If a noise source hits both wires equally, the receiver cancels it out. Silence is golden in audio. This cable gives you that silence.
Technical Specifications (The Nitty Gritty)
Here are the hard numbers. We don’t hide anything.
- Product: Brillion 1800B Digital Audio Cable
- Impedance: 110 Ohm (Nominal) – Matches AES/EBU standard
- Conductor: 24 AWG, 7 strands of 32, Tinned Copper
- Insulation: Cellular Polyethylene (Foam) – 0.022 inch thickness
- Shield: 100% Aluminum Foil + 24 AWG Tinned Copper Drain Wire
- Jacket: PVC, 0.023 inch thickness
- Outside Diameter: 0.185 inch (4.70 mm)
- Capacitance: 12 pF/ft (Conductor to Conductor)
- Velocity of Propagation: 76%
- Max Current: 3.8 Amps per conductor
- Voltage Rating: 300V
- Temperature: -30°C to +60°C
- Fire Rating: CMR / Riser (UL 1666)
- Origin: Made in the USA
Where should you use this cable?
You can use this cable anywhere you need professional digital audio.Studio Recording: Connect your high-end condenser mics to your audio interface. Get that “warm” analog sound but with digital clarity. The low noise floor means you can hear the room tone without hiss.Live Sound Reinforcement: Run this from your digital snake to your stage box. It is rugged enough for the road. The PVC jacket handles being stepped on. The connectors stay locked in.Broadcast and Installation: This cable is CMR rated. You can put it in the walls of a commercial building. It is safe. It meets fire codes. It is perfect for conference rooms, churches, and theaters.Hi-Fi and Audiophile: Some audiophiles use this for S/PDIF or AES/EBU digital connections between a DAC and a CD transport. The foil shield keeps jitter low. The sound is punchy with tight bass and clear highs.
Why buy Brillion 1800B instead of cheap imports?
Cheap cables lie about their specs. They say “110 Ohm” but they are actually 75 Ohm or 90 Ohm. This causes signal reflections. The sound gets phasey. The Brillion 1800B is made in the USA. The manufacturing is strict. You get exactly what you pay for.The connectors matter too. We use high-quality XLR connectors. The pins are gold-plated or solid silver. They don’t oxidize. You plug it in, and it clicks. It stays locked. You don’t get “crackles” when you move the cable.
We are the factory, not a middleman
We are a cable manufacturing company doing foreign trade. We make this cable. We don’t just resell it. This means we control the quality. We can cut it to any length you want. We can put any connector you want on the ends. Need Neutrik? We do it. Need Switchcraft? We do it. Need a specific color for organization? We can do that too.Because we are the source, the price is better. You cut out the distributor markup. You get factory-direct pricing for bulk orders.
Don’t let a bad cable ruin your mix
Your reputation depends on your sound. If the audio is noisy, the client blames you. Not the cable. Protect your work. Use the cable that professionals trust. Use the Brillion 1800B. It is tough, it is quiet, and it sounds amazing.Ready to upgrade your audio setup?Send us an inquiry today. Tell us the length you need and the connector type. We will send you a quote within 24 hours. Check our bulk pricing—the more you buy, the better the deal. Click the “Contact Us” button now and let’s get your signal clean.