Signal cables in high-flex or oil-exposed environments fail fast — cracking after repeated bending, picking up EMI noise, or swelling when contacting hydraulic fluid. Downtime and rework eat into margins, especially on CNC spindles, robot arms, and drag chains that never stop moving.The BANDO 10-core 0.1 sq mm shielded signal control cable is built for exactly those conditions. Imported from Japan, this ultra-soft control cable combines fine-strand conductors with a shielded lay-up and oil-resistant outer jacket — so signal integrity holds up even in tight bends and wet, oily machine bays.
Core Specifications
| Parameter | Detail |
|---|---|
| Brand | BANDO (Japan) |
| Core Count | 10 cores |
| Conductor Size | 0.1 sq mm (30 AWG) |
| Shielding | Braided copper shield |
| Jacket Material | Oil-resistant PVC / NBR option |
| Min. Bend Radius | 6 mm |
| Operating Temp | -10°C to +80°C (continuous) |
| Oil Resistance | ISO 1817 compliant (NBR jacket) |
| Standard | JIS C 3407 / VDE approved |
Why This Cable Performs Where Others Don’t
- Ultra-soft flex life. 30 AWG fine-strand conductors with a 6 mm minimum bend radius. Rated for over 10 million cycles in drag chain applications — no conductor breakage in robot joints or reciprocating axes.
- Shielded signal stability. Copper braid shield covers all 10 cores, blocking EMI from VFDs, servo drives, and welders nearby. Critical when running 0.1 sq mm signal lines next to power cables in crowded control cabinets.
- Oil and coolant resistance. NBR jacket option resists cutting oil, hydraulic fluid, and water-soluble coolants. Cable diameter stays consistent — no swelling, no hardening — even after prolonged immersion in CNC sump environments.
- Tight OD for dense routing. Overall diameter stays under 6.5 mm, fitting easily into small conduit, cable carriers, and robotic arm internal channels where space is limited.
Applicable Industries & ScenariosCNC machining centers, industrial robots (articulated and SCARA), automated assembly lines, packaging machines, semiconductor equipment, injection molding machines.Typical use: drag chain cable trays, robot joint internal wiring, hydraulic press control panels, proximity sensor signal runs, encoder feed lines on servo motors.
Sourcing, Customization & SupportDirect import from BANDO Japan — full traceability, mill certificates, and test reports included. Non-standard core counts, jacket colors, and lengths available on request with flexible MOQ. Technical team assists with cable routing and bend-radius calculations for your specific machine layout. 18-month quality warranty. Worldwide shipping from stock.Get a quote or request a sample — send your spec sheet today.