Signal interference and cable breakage from repeated flexing are top complaints in instrumentation and control wiring. Cheap PVC-jacketed wires crack under vibration, and unshielded conductors pick up EMI that corrupts sensor data. The Baitong RVVP 3-core 0.1 sq mm shielded wire solves both problems — built with tin-plated oxygen-free copper and a braided shield that stays flexible even after thousands of bend cycles.What You GetThis is a 3-core RVVP cable, 0.1 sq mm (28 AWG) per conductor, with an overall shielded construction. Each strand is tin-plated OFC for corrosion resistance and reliable solderability. The jacket is PVC, RoHS-compliant, and rated for indoor fixed or mobile installation where mechanical stress is moderate to high. It is not a power cable — it is built for low-voltage signal transmission where noise rejection and flexibility matter most.Core Specifications
| Parameter | Value |
|---|---|
| Conductor | Tin-plated oxygen-free copper (OFC) |
| Core count | 3 cores |
| Cross-section | 0.1 sq mm (28 AWG) |
| Cable type | RVVP — shielded, PVC jacket |
| Shield | Tinned copper braid |
| Jacket material | PVC, RoHS compliant |
| Operating temp | -15°C to +70°C |
| Rated voltage | 300V / 300V |
| Min. bend radius | 6× overall diameter |
| Stranding | 7/0.16 mm per conductor |
Why It Performs in Tough Conditions
- Flex life under vibration — The 28 AWG stranded OFC conductor bends to a 6 mm radius without work-hardening. Tested in conveyor-mounted sensor loops running 8+ hours/day, no conductor fatigue after 500k cycles.
- Shield integrity stays intact — Tinned copper braid resists oxidation in humid workshops. Shield coverage exceeds 85%, giving consistent EMI rejection across 10 kHz–1 GHz — critical near VFDs and servo drives.
- Tin plating, not bare copper — Prevents green corrosion in coastal or chemical-adjacent plants. Solder joints stay clean; no flux-heavy rework needed during field termination.
- Lightweight, easy to route — At roughly 12 kg/km, this cable pulls through tight conduit bundles and drag chains without snagging. Saves labor time on panel build-outs.
Where It Is Used
- PLC and DCS signal wiring in automation panels
- Sensor and transducer leads (temperature, pressure, proximity)
- Audio, intercom, and CCTV video signal runs
- Building management systems (BMS) and fire alarm loops
- CNC machine tool internal wiring and robot teach pendant cables
Baitong Factory Direct — No MiddlemanWe produce this RVVP wire in-house with continuous extrusion and braid-winding lines. Minimum order starts from 100 meters; custom core counts, jacket colors, and shielding rates are available within 10–15 working days. Every shipment includes a mill test report and RoHS/REACH declaration.Need a quote for a project run? Send us your spec sheet or cable list — we respond within 24 hours with pricing and lead time.