Electromagnetic interference in control circuits causes signal loss, equipment misoperation, and unplanned downtime — especially in factories with heavy motors, VFDs, and welding equipment running nearby. The AVVS-BS shielded control cable is built to eliminate that problem at the cable level.This is an imported-spec 3-core control cable with 1.25 mm² copper conductors, overall shield, and flexible PVC jacket. Designed for low-voltage signal transmission and power control in electrically noisy industrial settings. The tinned copper braid shield blocks EMI/RFI without adding bulk, while the fine-strand copper core keeps the cable supple enough for repeated bending in drag chains and cable carriers.Core Parameters
| Parameter | Specification |
|---|---|
| Model | AVVS-BS |
| Conductor | Tinned copper, fine-stranded, Class 5 |
| Cores | 3 |
| Cross-section | 1.25 mm² per core |
| Shield | Copper braid, coverage ≥ 85% |
| Jacket | PVC, black (RAL 9005) |
| Rated voltage | 300/500 V |
| Operating temp | -15°C to +70°C (fixed), -5°C to +70°C (flexing) |
| Min. bending radius | 6× cable OD (fixed), 10× cable OD (flexing) |
| Standard | VDE 0250 / IEC 60228 |
| Weight | Approx. 95 kg/km |
Why It Performs Where Standard Cables Fail
- Shield holds up in drag chains. The 85% copper braid resists abrasion inside energy chains on CNC machines and robotic arms — no shield breakage after 5 million flex cycles.
- Fine-strand core survives tight routing. 0.2 mm strand diameter means the cable bends to 10× OD without conductor fatigue, critical for control cabinets with dense wire bundles.
- EMI rejection tested near VFDs. Installed within 300 mm of 7.5 kW variable frequency drives, signal deviation stays below 2% — verified in automotive stamping lines.
- Oil and coolant resistant jacket. PVC compound resists mineral oil, cutting fluid splashes, and mild chemicals common in machining centers and press lines.
Typical ApplicationsCNC machine tool controls, robotic cell signal wiring, conveyor sensor cabling, PLC I/O connections, welding equipment control circuits, packaging machine power-signal combo runs, HVAC actuator wiring, and any low-voltage circuit exposed to motor-generated noise.Factory Direct — We Engineer to Your SpecWe produce AVVS-BS and equivalent shielded control cables in-house with MOQ from 500 meters. Custom core counts (2–37), cross-sections (0.5–10 mm²), jacket colors, and screen types (braid, foil, or combo) available. Lead time 7–12 days for standard stock, 18–25 days for custom runs. Every batch ships with a test report and 18-month quality guarantee. Send your cable spec or drawing — we reply with pricing within 4 hours.