Signal loss and cable failure in noisy factory floors cost manufacturers thousands in unplanned downtime. EMI from VFDs, servo motors, and welders corrupts data lines in control cabinets. Standard cables crack under vibration, swell in oil, and lose connections in humid shops.The Model 20276 is an imported 8-core 0.15mm² shielded twisted pair tin-plated signal transmission control cable built for these conditions. Each pair is twisted to cancel crosstalk. An overall braid shield blocks external EMI. Tin-plated copper conductors resist oxidation and maintain low contact resistance through years of plug-unplug cycles. This cable carries clean sensor and data signals where reliability is non-negotiable.Core Parameters
| Spec | Value |
|---|---|
| Core Count | 8 |
| Conductor Size | 0.15 mm² |
| Construction | Twisted pair |
| Shield Type | Braided + foil (overall) |
| Conductor Material | Tin-plated copper |
| Insulation | PVC |
| Outer Jacket | PVC / PUR (optional) |
| Operating Temperature | -20°C to +80°C |
| Rated Voltage | 300V |
| Model Number | 20276 |
| Compliance | CE, RoHS |
Why This Cable Performs in Tough Conditions
- EMI rejection in high-noise zones. The dual-layer shield maintains signal integrity even when routed alongside 400V power cables or inside VFD panels. Tested stable within 0.5m of 3-phase motor leads.
- Flex life under constant motion. The 0.15mm² tinned copper strands survive millions of bend cycles in drag chains, robotic arms, and cable carriers. No conductor fatigue cracking at bend radii down to 5× cable OD.
- Oil and chemical resistance. PVC jacket resists cutting fluid, hydraulic oil, and coolant splashes. Holds up inside CNC enclosures and stamping presses where standard jacketing swells and cracks within weeks.
- Stable termination over time. Tin plating prevents surface oxidation on stripped conductors. Crimp and solder connections stay below 10mΩ resistance through thermal cycling from -20°C to +80°C, even in unheated outdoor cabinets.
Applicable Industries & Use CasesIndustrial automation, CNC machine tools, robotic welding cells, packaging lines, conveyor control systems, PLC and DCS I/O wiring. Typical applications include encoder feedback cables, sensor signal runs, device-net and profibus data links, and panel-to-panel interconnects in automated production lines.Custom Orders & SupportWe cut custom lengths, offer PUR or LSZH jacket options, and adjust shielding per your EMC requirements. MOQ applies for non-stock configurations. Lead times start at 5 business days for standard rolls. Need a sample or a project quote? Send your spec sheet or drawing — our engineering team responds within 24 hours.