Tired of signal interference ruining your expensive equipment?
You spent a lot of money on sensors, cameras, and control systems. But if your cable is cheap, your whole setup fails. We see this all the time. Noise creates ghost images on CCTV screens. Voltage drops make motors run hot and stop working. Water gets in and rusts the copper wire from the inside out. It is frustrating. You need a cable that protects the signal and lasts for years, even in bad weather. You need a cable built for the real world, not just a lab. This product solves these headaches. It uses high-quality materials to stop noise, resist corrosion, and handle tough environments.
What makes this 4-core shielded cable special?
This is not a standard wire. It is a professional-grade extension cord designed for heavy-duty use. The core structure uses 4 conductors, each at 1.5 square millimeters (which equals 16AWG). This size is the “sweet spot.” It is thick enough to carry power for big machines but thin enough to bend easily during installation.The “double shielded” part is the key. We wrap the inner wires in foil first. This blocks high-frequency noise from things like LED lights or radio waves. Then, we add a braided copper mesh over the foil. This mesh catches low-frequency interference and protects the foil from physical damage. It acts like a fortress for your data and power.We also use tin-plated copper. Why? Because bare copper gets dirty and green over time. Tin plating stops oxidation. If you use this cable outside or in a humid factory, the wires stay shiny and conductive for much longer. It is a small detail that saves you big money on maintenance later.
Technical specs you can trust
We believe in being honest about what we sell. Here are the exact numbers you need to know:
- Conductor: 4 Cores (4 wires inside plus the shield drain wire)
- Wire Gauge: 16 AWG / 1.5 mm²
- Material: Stranded bare copper with tin plating
- Shielding: Aluminum foil + Braided copper mesh (Double shield)
- Voltage Rating: 600V / 0.6-1KV (Safe for most low and medium voltage systems)
- Insulation: PVC or XLPE (Cross-linked Polyethylene) options available
- Temperature: -20°C to 90°C (Handles heat and cold well)
- Packaging: 305 meters (1000 feet) per wooden drum or coil
- Certifications: CE, RoHS, ISO9001, UL style options
The 1.5mm² cross-section gives low resistance. This means less heat and more power reaches the end of the line. For audio or data, the low capacitance keeps the sound crisp and the data fast.
Where should you use this cable?
This wire is a chameleon. It fits into many different jobs because it is tough and flexible. Here are the top places we see our clients use it:
Industrial Automation and Robotics
Factories are full of electric noise. Welding machines and big motors create magnetic fields that mess up control signals. This shielded cable keeps the communication between the PLC and the machines clear. It prevents errors and stops the production line from crashing.
CCTV and Security Systems
If you run video cables near power lines, you get “hum bars” on the screen. The double shield stops this. It ensures your security footage is clear, day or night. It is perfect for long runs from the camera to the recorder.
Outdoor and Landscape Lighting
Burying cable in the ground is hard work. You do not want to dig it up again. The sunlight-resistant PVC jacket stops the sun from cracking the insulation. The water-blocking design keeps moisture out. It works great for 12V or 24V garden lights and smart home sensors outside the house.
Marine and Automotive
Boats and cars vibrate a lot. Standard wires break or short out. The stranded copper core is flexible, so it handles vibration without snapping. The tin plating protects against saltwater corrosion. It is great for wiring navigation lights, bilge pumps, or audio systems.
Why buy this specific 8-reel pack?
You might ask, “Why 8 reels?” Buying in bulk is smart for big projects. When you order 8 rolls at once, you save on shipping costs per meter. You also ensure color consistency. All 8 rolls come from the same production batch. This means the insulation color looks the same, which makes labeling and troubleshooting easier for your electricians.We pack each roll tightly on a drum. This prevents kinks and twists during the long ocean freight. When it arrives at your port, the cable is ready to pull, not full of tangles. We know logistics is a pain. We try to make the arrival part easy for you.
How to install it without stress
Don’t worry if you are not an expert. This cable is designed for easy installation. Because it is stranded, you can bend it around corners without using special tools. You do not need to force it through conduits.For the shielding to work best, you must ground the drain wire. Connect the bare copper wire from the shield to the earth ground at one end only (usually the control panel side). This drains away the noise. If you ground both ends, you might create a loop that causes new problems. Just remember: one end for the ground wire.If you are burying it, use a conduit for extra safety. If it is going directly into the ground, make sure you have the “Direct Burial” rated version with the thicker PE jacket.
Frequently asked questions about this cable
Is 16AWG thick enough for a 10-amp load?Yes. For runs under 30 meters, 16AWG (1.5mm²) can safely handle 10 to 13 amps. If your run is very long (over 50 meters), you might see a voltage drop. In that case, we recommend using 12AWG or 10AWG, or boosting the voltage at the source.Can I use this for audio speakers?Technically, yes, but it is overkill for home stereo. It is perfect for high-power outdoor speakers or professional 100V line audio systems where you need to run power and signal in the same cable.What is the difference between PVC and XLPE insulation?PVC is softer and cheaper. It is great for indoor use or short outdoor runs. XLPE is harder. It resists heat better (up to 90°C) and is tougher against scratches. If your environment is hot or rough, choose XLPE.
Ready to stop the noise and secure your power?
You have seen the specs. You know it stops interference. You know it resists rust and water. Now it is time to see if it fits your project.We are a factory, not just a trader. We can customize the length, the jacket color, or even the connector types if you need a large order. We ship worldwide, and we handle the export paperwork so you don’t have to.Don’t gamble with cheap wire that will fail in a year. Invest in quality that lasts a decade.Send us an inquiry right now. Tell us your voltage needs and how many meters you require. We will send you a competitive quote within 24 hours. Let’s get your project powered up correctly.