Is Your Signal Weak or Does the Screen Keep Glitching? We Fix That.
You know the feeling. You install a new camera system or audio setup, and the video keeps freezing. The sound has static noise. Or worse, after a few months in a damp environment, the connectors turn green and stop working. This is not just annoying. It costs you money in repairs and lost customers.The problem is usually the wire. Cheap copper rusts easily. Poor shielding lets in noise from motors and lights. Stiff cables are a nightmare to thread through tight walls. You need a cable that fights back. You need a cable that conducts power and data perfectly, even in tough spots. Our 28 AWG tinned copper shielded signal cable is the answer. It is built for stability, flexibility, and long life. We make it for engineers who hate callbacks.
Core Specs: What You Get in Every Meter
We do not hide behind vague words. Here are the hard numbers for our 0.1/0.14 sq mm single-core shielded cable. You can compare this to any datasheet from Belden or Allied Wire.
Conductor Details
- Material: High-purity Oxygen-Free Copper (OFC). We plate it with Tin (Sn).
- Why Tin? It stops oxidation. The copper stays shiny and conductive, even in wet or salty air.
- Size: 28 AWG (approx 0.14 sq mm / 0.00014 sq in).
- Stranding: 7 strands of 36 AWG. This makes the wire super flexible. It breaks less when you bend it.
- Resistance: Very low. We keep it under tight control to ensure your signal goes far without losing power.
Insulation & Shielding
- Insulation: PVC (Polyvinyl Chloride) or FEP/Silicone (for high heat).
- Voltage Rating: 300V. Safe for most low-voltage power and signal mixing.
- Shield Type: Foil Shield (Aluminum/Polyester) + Drain Wire.
- Coverage: 100% coverage. This is critical. It blocks EMI (Electromagnetic Interference) from nearby power lines.
- Jacket: PVC outer jacket. Black or Grey. It resists oil, acid, and abrasion.
Electrical & Physical Data
- Capacitance: Low capacitance is key for high-speed data. Ours is typically under 55 pF/ft.
- Temperature Range:
- PVC: -10°C to +105°C (14°F to 221°F).
- Silicone: -60°C to +200°C (-76°F to 392°F).
- Bend Radius: Very small. You can bend it around corners easily without kinking.
Why “Tinned” and “Shielded” Matters for Your Business
You might ask, “Why pay extra for tinned wire?” or “Do I really need shielding?” Here is the simple truth.
Fight Corrosion like a Pro
If you sell cables to the marine, automotive, or outdoor security market, rust is the enemy. Bare copper turns into copper oxide, which is a poor conductor. Our tinned connector cables solve this. The tin plating acts as a shield. Even if the jacket gets scratched, the tin protects the core. This means your installations last 5 years, not 6 months.
Stop the Noise (EMI/RFI)
Imagine a factory floor with big motors running. Or a car audio system with an alternator whine. These create “noise” in the wire. Without a shield, this noise shows up as lines on a video monitor or buzz in a speaker. Our shielded video cable wraps the signal core in a foil blanket. The drain wire catches the noise and sends it to the ground. The result? Crystal clear video and pure audio.
Flexibility Saves Installation Time
Solid wire is cheap, but it is hard to route. You have to pull it straight. If you twist it, it kinks and breaks. Our multi-strand tinned video cable is like a rope. You can pull it through conduit, around door hinges, and inside tight equipment racks. It saves your installers hours of frustration.
Where to Use This Cable (Real World Scenarios)
This wire is not just for one thing. It is a workhorse. Here is how our clients use it:
CCTV & Security Systems
- Use Case: Connecting IP cameras to NVRs.
- Why: It handles PoE (Power over Ethernet) and video signals in one run. The shielding stops the video from “jittering” when the camera moves.
- Spec fit: 26 AWG for power, 28 AWG for data.
Internal Wiring of Electronics
- Use Case: Inside a control box or a PCB connection.
- Why: The 0.14 sq mm size fits through small grommets. The tinned ends solder easily to circuit boards.
- Spec fit: High strand count for vibration resistance.
Audio & Intercoms
- Use Case: Connecting microphones to mixers or doorbells to main units.
- Why: Low capacitance preserves the high-frequency sounds (treble). The shield stops “hum” from AC power lines.
- Spec fit: Low noise, flexible jacket.
Automotive & DIY Projects
- Use Case: Arduino/Raspberry Pi sensors or car reverse cameras.
- Why: Cars get hot and cold. Our PVC and Silicone options handle the heat. The tinned copper handles the moisture from car washes.
- Spec fit: 28 AWG is standard for hobbyist electronics.
Quality Control: We Test So You Don’t Have To
We do not just make the wire and ship it. We test it. Every batch goes through checks that match international standards.
The Tests We Run
- Conductor Resistance: We measure the Ohms per 100m. If it is too high, we reject it.
- Insulation Resistance: We apply high voltage to ensure the jacket doesn’t leak.
- Hi-Pot Test: We test if the wire can handle spikes in voltage.
- Flame Test: Our PVC is UL94 V-0 rated. It self-extinguishes. It won’t burn your building down.
- RoHS & REACH: No lead, no cadmium. Safe for the environment and your workers.
Certifications
- UL Style: UL AWM 2464 or UL 2651.
- ISO: ISO/IEC 11801 for structured cabling.
- TLC: We provide TLC certificates for specific projects.
Packaging & Customization
We know logistics matter. We pack this wire so it arrives ready to use.
- Standard Packing: 305 meters (1000 feet) per easy-pull box. Coils are labeled clearly with specs.
- Custom Lengths: Need 50cm jumpers? Or 200m spools? We can cut and strip to your exact length.
- Connectors: We can crimp JST, Molex, or RCA connectors on both ends. Just send us the drawing.
- Colors: Black is standard, but we do Red, Blue, White, Yellow for power coding.
Why Buy From Us?
You have many choices in China. Here is why smart buyers choose us:
- Real Factory: We own the drawing frame machines and the extrusion lines. We control the copper quality. No OEM stickers.
- Fast Samples: We send free samples via DHL/FedEx in 3 days.
- Engineering Support: Confused about AWG sizes? We help you calculate the right diameter for your current load.
- Warranty: We guarantee the specs. If the DC resistance is wrong, we replace the goods.
Ready to Upgrade Your Cable Quality?
Stop dealing with returns and complaints about bad signals. Give your customers a product that works the first time, every time. Our 0.1/0.14 sq mm tinned shielded cable is in stock and ready to ship.Send us your inquiry today. Tell us the AWG size, the jacket material you need, and the quantity. We will send you a competitive quote within 24 hours. Let’s build something reliable together.Click “Send Inquiry” now to get a free sample and a detailed quotation!