Tired of Wires That Break, Rust, or Cause Signal Loss?
You know the feeling. You are building a custom device, fixing a sensor, or setting up a new control panel. You use a cheap wire. It looks fine at first. But then, the signal gets weak. The device acts crazy. Or worse, the wire snaps when you try to bend it just a little.Rust is another big problem. Old copper wires turn green and stop working well. This happens fast in humid places. You need a wire that stays shiny and conducts power perfectly every time.We have the solution. Our 26 AWG tinned copper jumper wire is built for exactly these problems. It is not just a piece of metal. It is a high-quality tool for your work. The 0.13 sq mm single-core multi-strand design makes it super soft. It does not break. The tin coating stops rust. It works great for PCB jumper projects, sensor connections, and audio equipment.
What Makes This 26 AWG Wire Special?
This is not standard wire. It is made for precision work. Let’s look at the details.
The “RV” Standard Means Quality
In China and international markets, “RV” means flexible copper wire with PVC insulation. It is the go-to choice for internal wiring of electronic gear. Our wire follows the strict JB/T8734.5-2016 standard. This means you get consistent quality in every meter.
Tinned Copper: The Anti-Rust Shield
Why do we use tin? Bare copper gets dirty and rusty (oxidation) when it touches air. Tin is a shield. Our tinned copper wire keeps the copper bright and clean. This makes soldering very easy. The solder flows smooth. You get a strong connection fast. It also resists acid and alkali. This is vital for industrial sensors.
Multi-Strand for Flexibility
Solid wire is stiff. It breaks if you bend it too much. Our wire uses many tiny copper strands twisted together. This is multi-strand copper wire. You can bend it thousands of times. It will not snap. It is perfect for tight spaces inside a machine or a small electronic box.
Technical Specifications You Can Trust
We believe in being clear. Here are the hard numbers for our 0.14 sq mm extension cable:
- AWG Size: 26 AWG (American Wire Gauge)
- Metric Size: 0.13 sq mm to 0.14 sq mm (Nominal Cross Section)
- Conductor: Bare or Tinned Copper (Annealed)
- Stranding: 7 strands of 0.10mm or 7/0.15 (Fine strands for softness)
- Insulation Material: PVC (Polyvinyl Chloride)
- Insulation Color: Red, Black, Yellow, Green, Blue, White, etc. (Customizable)
- Rated Voltage: 300/300V (Safe for low voltage electronics)
- Temperature Range: -15°C to +70°C (Standard use)
- Outer Diameter: Approx 1.0mm – 1.2mm (Very slim)
- Resistance: Low DC resistance for long runs (approx 130-140 Ohm/km)
- Bending Radius: Very small (4 times the cable diameter)
- Flame Retardant: Self-extinguishing (Does not burn easily)
Where to Use This Flexible Cable?
This wire is a chameleon. It fits in many places. Here are the best uses:
PCB and Breadboard Jumpers
If you are an engineer or a hobbyist, you need PCB jumper wire. It connects pins on a circuit board. The 0.13 sq mm size fits perfectly into breadboard holes. It does not widen the hole. You can use it for Arduino or Raspberry Pi projects.
Internal Wiring of Equipment
Big machines have small wires inside. Our RV single core wire is used in:
- Fire alarm systems
- Intelligent automation systems
- Automatic meter reading
- Communication equipmentIt handles data signals well. The PVC sheath protects against interference.
Audio and Video Gear
For microphones, speakers, and camera modules, you need a quiet wire. Our shielded and non-shielded versions stop noise. The flexible cable is easy to route inside tight speaker housings.
Sensor and Control Systems
In factories, sensors move and vibrate. A stiff wire will crack. Our multi-strand wire moves with the machine. It is great for:
- Temperature sensors
- Proximity switches
- Robot arm cabling
Why Choose Our Factory?
You have many choices. Why pick us?
We Control the Quality
We are a real manufacturer, not just a trader. We have two big factories in Henan, China. The area is over 300,000 square meters. We check every step. From the copper rod to the final PVC jacket. We have ISO9001, CE, CCC, and RoHS certificates.
Best Price for Bulk
We make a lot of wire—10,000 meters per day. This means we can give you a great price. The MOQ (Minimum Order Quantity) is flexible. We can do 100 meters for samples. Or 100,000 meters for big orders.
Fast Delivery
We are near the Lian Huo highway and Qingdao port. Shipping is fast. We can send samples in 3 days. Big orders take 15-20 days. We use strong package: rolls, drums, or coils. The wire will not get crushed in transit.
Custom Service
Need a special color? Need a specific print on the wire? We can do it. We have 630 staff. 65 are technical experts. They can solve your special cable problems.
How to Order and Get a Quote
Buying cable should be easy. Do not waste time searching “RV wire near me” or “26 AWG jumper wire price”. Just talk to us.We offer OEM and ODM services. You can use your brand name. We handle the rest.Ready to start?
- Tell us the AWG size (26 AWG).
- Tell us the length you need per roll (e.g., 50m, 100m, 500m).
- Tell us the color (Red, Black, etc.).
- Tell us the quantity.
We will send you a quote in 24 hours. Our sales team speaks good English. We will answer all your questions about the 0.13 sq mm single-core wire.Don’t settle for bad connections. Power your projects with the best flexible copper wire.Send Inquiry Now for Free Samples!