Stop Losing Signals and Wasting Money on Bad Cables
You know the frustration. You have a high-end machine or a complex control system. But the signals keep dropping. The data gets messy. You see “noise” on your screens. Or worse, the cable jacket cracks after a few months of movement. You have to stop the production line to fix the wiring. This costs you time and money.Most cheap cables cut corners. They use bare copper that rusts easily. They have weak shielding that lets electrical noise get in. They are stiff and hard to pull through tight spaces. You need a cable that works hard so you don’t have to.Our 15-core 0.2mm² shielded cable solves these problems. It is built for real-world use. It has a strong shield to block noise. The conductors are tinned to stop rust. The jacket is tough against oil and chemicals. It is flexible enough for moving parts but strong enough for fixed wiring. This is not just a wire. It is a reliable part of your equipment.
What Makes This 15-Core Cable Special?
This cable is designed for equipment connection and data transmission. It has 15 separate wires inside one jacket. Each wire has a cross-section of 0.2 square millimeters. This is roughly equal to 24 AWG. This size is the “sweet spot” for signal control. It carries enough power for sensors and data signals without being too bulky.The “shielded” part is the most important feature. Imagine a shield around your data. It stops outside noise from messing up your signals. We use a combination of foil and braid shielding. The foil covers the wires completely. The tinned copper braid covers the foil. This gives you almost 100% protection. It is perfect for places with motors, relays, and heavy machinery. These places create a lot of electrical noise. This cable keeps your data clean.The conductors are made of fine-stranded tinned copper. Why tinned? Because bare copper oxidizes when it touches air. Oxidation causes bad connections. Tin plating stops this. It keeps the wire shiny and conductive for years. The fine strands make the cable very flexible. You can bend it around corners without breaking it. This is crucial for robotic arms and moving cable chains.
Technical Specifications You Can Trust
We believe in being honest about what our cables can do. Here are the hard numbers for our 15-core shielded control cable:
- Number of Cores: 15
- Conductor Size: 0.2 mm² (Approx. 24 AWG)
- Conductor Material: Annealed Stranded Tinned Copper
- Voltage Rating: 300 Volts (300V)
- Temperature Range: -20°C to +75°C (Flexible use)
- Shielding Type: Aluminum Mylar Foil + Tinned Copper Braid (85-90% Coverage)
- Shield Coverage: > 85% for low noise pickup
- Jacket Material: PVC (Polyvinyl Chloride)
- Jacket Color: Black (Custom colors available)
- Outer Diameter: Approx. 8.0mm – 9.5mm (Depends on insulation thickness)
- Weight: Approx. 100-120 kg/km
- Flexibility: Very High (Class 5 flexible conductor)
- Special Features: Oil resistant, Sunlight resistant, Flame retardant
- Certifications: UL AWM Style 1061, UL 2464, RoHS, REACH Compliant
This cable meets strict standards like UL 2464. This means it has been tested for safety and performance. The 300V rating is standard for industrial control circuits. It is safe to use in most low-voltage equipment. The braid angle is optimized to be less than 40 degrees. This makes it easy to push back the shield when you are crimping connectors. You don’t need special tools to terminate it.
Where Should You Use This Cable?
You can use this cable in many different places. It is a “general purpose” cable for industry. But here are the best places to use it:Industrial Automation and RoboticsThis is the #1 use case. Connect PLCs to sensors, servo motors, and robotic arms. The cable needs to move millions of times. Our cable has a special PVC jacket that resists oil. Factory floors are full of oil and coolant. Normal cables get soft and rot. This cable stays tough. It is also rated for cable trays. You can run it along the ceiling of a factory without worry.Data and Communication SystemsYou need accurate data. RS485 and DeviceNet systems need a specific impedance. Our twisted pair design helps with this. We twist the pairs to cancel out noise. Even with 15 cores, we group them into pairs or quads. This keeps the signal strong over long distances. Use this for building automation, security cameras, and audio systems.Heavy Machinery and TransportTrains, subways, and heavy trucks vibrate a lot. Vibration breaks wires. The fine-stranded construction absorbs the shock. The tinned copper resists moisture and salt. This is great for marine equipment or outdoor installations. The black PVC jacket has carbon black. This makes it resistant to UV light from the sun. It won’t crack after a year outside.Food and Beverage Washdown AreasSome of our cables are evaluated for washdown procedures. If you need to hose down your equipment, you need a cable that resists chemicals. The PVC jacket is easy to clean. It resists the cleaning agents used in food plants.
Why Quality Matters for Your Business
You might think, “It’s just a wire. I’ll buy the cheapest one.” But think about the cost of failure.If a cheap cable fails, your machine stops. A technician has to find the bad wire. You have to buy a new cable. You pay for labor. The downtime costs more than the cable ever did.Our cable saves you money in the long run.
- Longer Life: The tinned copper doesn’t rust. The jacket doesn’t crack. It lasts 5 to 10 years, not 6 months.
- Less Interference: You get accurate data. No errors. No re-sending data packets. Your system runs smooth.
- Easy Installation: The cable is flexible. Your installers finish the job faster. You save on labor costs. The shield is easy to strip back.
- Safety: The 300V rating and flame-retardant jacket keep your facility safe. It meets UL standards for fire safety.
We use high-quality materials. We don’t use recycled copper. We use virgin PVC for the jacket. This ensures consistency. Every meter of cable we send you has the same quality.
Frequently Asked Questions About This Cable
Is this cable suitable for outdoor use?Yes. The PVC jacket is UV resistant and moisture resistant. It is great for outdoor control boxes and lighting.Can I use this for audio signals?Yes. The shielding is excellent for low-noise audio. It prevents hum and buzz from nearby power lines.How do I ground the shield?You should ground the drain wire (the bare copper wire inside the shield) at one end only. Usually, this is at the control panel end. This creates a “Faraday cage” effect without creating a ground loop.What is the minimum bend radius?The minimum bend radius is about 9 times the cable diameter. For this cable, that is roughly 70mm to 80mm. Don’t bend it too sharp, or you will damage the shield.Can you make the jacket in different colors?Yes. We can make it in Grey (RAL 7001), Blue, Orange, or Black. We can also do transparent jackets if you need to see the wires inside for inspection.What connectors fit this cable?The outer diameter is about 8mm to 9mm. You can use standard M12 or M8 connectors, or D-Sub connectors if you break out the wires. The 24AWG size fits most standard crimp pins.
Get Your Custom Quote Today
We are a factory. We don’t just resell. We make the cable. This means we can control the quality. We can also customize it for you.Do you need a different number of cores? We can do 2 core, 4 core, up to 50 core.Do you need a different conductor size? We can do 0.15mm², 0.3mm², or 0.5mm².Do you need a special jacket? We can offer LSZH (Low Smoke Zero Halogen) for tight indoor spaces. We can offer PUR (Polyurethane) for extreme flexibility and oil resistance.We have been exporting cables for many years. We know what customers in the US, UK, and Australia need. We know the shipping rules. We know the electrical codes.Don’t settle for “good enough.” Get a cable that is built to last. Stop the noise. Stop the downtime.Send us your inquiry now. Tell us the quantity you need. Tell us the specs. We will send you a price within 24 hours. Let’s build something reliable together.Click here to request a quote. Let’s get your production line running smoothly.