Drag chain cables in automated equipment fail too often — insulation cracks after a few thousand cycles, signal interference causes machine faults, and downtime eats into your production schedule. Most off-the-shelf cables simply are not built for continuous flexing in harsh workshop environments.This imported drag chain cable is engineered for exactly that. 14 cores of 0.2mm² (24AWG) twisted pair conductors, individually shielded and jacketed for high-flex signal and control transmission. The fine wire construction keeps bend radius tight, while the shielding layer blocks EMI from servo drives and VFDs — so your sensors, encoders, and control signals stay clean even in electrically noisy machine bays.Core Specifications
| Parameter | Detail |
|---|---|
| Core count | 14 |
| Conductor size | 0.2 mm² / 24 AWG |
| Conductor type | Stranded copper, fine wire |
| Pair construction | Twisted pair |
| Shielding | Overall braided + individual pair shield |
| Jacket material | PUR (polyurethane) |
| Min. bend radius | 7.5 × cable OD (fixed) / 10 × cable OD (moving) |
| Rated voltage | 300 V |
| Operating temp. range | -20°C to +80°C (continuous), -40°C to +105°C (short term) |
| Tensile strength | ≥ 30 N |
| Standard compliance | UL 2054, CE |
Why This Cable Performs Where Others Don’t1. Tight bend radius, millions of cycles. The 0.2mm² fine-strand conductors and PUR jacket allow repeated flexing at radii as low as 7.5× OD — tested to over 5 million cycles in energy chain applications. No cracking, no conductor breakage.2. Shielding that actually works in a factory. Dual-layer shielding (braid + pair foil) suppresses EMI from nearby servo motors, inverters, and welding equipment. Signal integrity holds up even when the cable runs parallel to 400V power lines inside the same drag chain.3. Resists oil, coolant, and abrasion. PUR jacket stands up to cutting fluids, hydraulic oil, and coolant mist common in CNC machining centers. It also resists abrasion from cable carrier contact points — a leading cause of premature jacket failure.4. Lightweight and compact. At 24AWG with 14 cores, the overall diameter stays small. This means smaller drag chains, lighter moving mass, and less wear on carrier bearings — a real advantage on high-speed pick-and-place robots and gantry systems.Typical Applications
- CNC machine tools (lathes, mills, grinding centers)
- Industrial robots and robotic arms (6-axis, SCARA, delta)
- Automated assembly and packaging lines
- Laser cutting and plasma cutting machines
- Injection molding machines
- Port and crane automation
- Automated guided vehicles (AGVs)
Any application where signal or low-power control wires run inside an energy chain, cable carrier, or flexible conduit — this cable is the fit.Customization & SupportWe offer custom core counts (4 to 60+), custom jacket colors, custom lengths, and connector termination on both ends. Standard lead time is 5–7 business days; rush orders available. Every batch ships with a test report.Need a cable for a non-standard machine or a replacement for an existing brand? Send us your drag chain model number or cable drawing — we will quote within 24 hours.Request a quote now →