Signal drift, intermittent readings, and cable breakage inside tight instrument housings — these are real problems when using standard multi-core cable in precision measurement and control systems. Poor shielding lets EMI corrupt low-voltage signals. Stiff conductors crack under repeated flexing. Cheap imports fail in humid or chemically aggressive environments.This imported 12-core shielded cable is built to solve exactly those issues. Each conductor is 30 AWG (0.06 sq mm) tinned copper — ultra-flexible, corrosion-resistant, and consistent in diameter. The overall shield (aluminum mylar + tinned copper braid) blocks electromagnetic interference that ruins sensor and meter accuracy. The jacket is soft PVC, rated for indoor industrial use, and the cable handles tight bends and repeated movement without conductor fatigue.Core Specifications
| Parameter | Value |
|---|---|
| Conductor count | 12 cores |
| Conductor size | 30 AWG / 0.06 sq mm |
| Conductor material | Tinned copper (extra soft) |
| Shield type | Al-Mylar + tinned Cu braid (85% coverage) |
| Jacket material | Soft PVC |
| Outer diameter (approx.) | 5.5 mm |
| Operating temperature | -20°C to +80°C |
| Rated voltage | 300 V |
| Standard reel length | 305 m / 1000 ft |
| Compliance | RoHS, REACH |
Why This Cable Performs Where Others Don’t
- Bend radius under 8 mm without damage. The extra-soft tinned copper strands stay intact even when routed through cramped control panels, meter junctions, or robotic arm conduits — no more micro-cracks after a few thousand flex cycles.
- Shielding that actually works at 30 AWG. Thin signal cables are the hardest to shield effectively. The dual-layer braid + foil construction delivers >85% coverage, keeping EMI out of mV-level sensor signals in motor-heavy or VFD environments.
- Tinned copper resists what bare copper can’t. In humid plants, chemical processing areas, or outdoor meter cabinets, oxidation raises resistance and kills signal integrity. Tin plating keeps contact resistance stable for years — no re-termination needed.
- Imported consistency, reel after reel. Conductor diameter tolerance held within ±0.02 mm. No surprise diameter spikes that jam automated stripping machines or cause uneven termination crimping on production lines.
Applicable Industries & Use Cases
- Industrial automation — PLC I/O wiring, sensor bus connections, distributed I/O modules
- Test & measurement — oscilloscope probe leads, data logger multi-channel cabling
- Medical equipment — patient monitor signal chains, analyzer internal wiring
- HVAC & building automation — thermostat multi-wire runs, BACnet MS/TP trunk
- Energy — meter reading signal cables, SCADA remote terminal wiring
Typical installation: inside machine enclosures, cable trays, conduit runs up to 30 m between instrument and junction box. Not rated for direct burial or outdoor UV exposure — use with outdoor-rated conduit if needed.Sourcing, Customization & SupportWe stock this 12-core 30 AWG shielded cable for immediate shipment. Need a different core count (4, 6, 10, 19, 24), paired or triax shield, LSZH jacket, or custom reel length? We cut to spec — MOQ as low as 500 m for custom runs. Every order includes a test report (continuity, shielding effectiveness, jacket integrity).Drop us your cable spec or drawing and we’ll respond with pricing and lead time within 24 hours.