Are you tired of signal cables that break easily? Do you hate cables that are too stiff to fit in small machines? Do you see signal errors because of bad wires? We know these problems well. In factories and labs, you need a wire that works every time. It must be thin. It must bend easily. It must carry signals clearly. Our 10-core 30AWG signal cable solves these pain points. It is built for instrument connections. It is flexible, strong, and reliable. This is not just a wire. It is a solution for your tight spaces and precision work.
What Is This 10C 30AWG Unshielded Cable?
This cable has 10 separate wires inside one jacket. Each wire is 30 AWG. This is a small size. The cross-section area is 0.05 square millimeters. The wires are made of tinned copper. This means the copper is coated with tin. Why? Because tin stops rust. It makes the wire last longer. The wire is also very flexible. You can bend it many times without damage. The cable has no shield. This makes it lighter and cheaper. It is perfect for places with low noise. You use it to connect instruments. It carries control signals or data. It fits in small cable chains. It works well in electronics and control panels.
Why Choose 30AWG for Your Project?
Choosing the right wire size is hard. If it is too thick, it takes up space. If it is too thin, it breaks. 30 AWG is the sweet spot for signal lines. It is thin. The diameter is about 0.255 mm. This is like a human hair. It saves space in your cabinet. It fits in small connectors. But it is strong enough for low voltage signals. It handles data well up to certain speeds. For short distances, it is perfect. It is much cheaper than 28 AWG or 24 AWG. You get 10 cores in one cable. This means you can run many signals in one go. You do not need 10 separate wires. This saves time on installation. It reduces clutter in your machine.
Technical Specifications You Can Trust
We believe in clear specs. No hidden tricks. Here is the data you need:
- Conductor: Stranded tinned copper.
- Wire Gauge: 30 AWG per core.
- Number of Cores: 10 cores.
- Cross-Sectional Area: 0.05 mm².
- Insulation Material: PVC (Polyvinyl Chloride).
- Jacket Material: PVC.
- Shielding: Unshielded (UTP).
- Voltage Rating: 300V.
- Temperature Range: -40°C to +75°C.
- Color Code: Black, White, Red, Green, Blue, etc. (Standard colors).
- Packaging: Reels or cut to length.
- Standards: RoHS compliant, UL style.
The PVC jacket is tough. It resists oil and water. It is flame retardant. This is important for safety in buildings. The tinned copper resists corrosion. This is key for humid environments. The cable is flexible. The minimum bend radius is 4 times the cable diameter. You can pull it through tight loops. It will not kink. It will not break.
Where to Use This Instrument Connection Cable?
This cable is everywhere. It is used in industrial automation. It connects sensors to PLCs. It links control panels to machines. You see it in test equipment. Labs use it for instrument wiring. It connects multimeters and oscilloscopes. Data centers use similar cables for short patch leads. It is great for audio and video signals too. Because it is unshielded, keep it away from heavy motors. Use it in dry, clean areas. It is perfect for robot arms. The cable moves with the arm. It does not snap. It is also good for CCTV cameras. It carries video and power. It is lightweight. This helps with cable management. You can bundle many cables together. They stay flexible.
How Does It Compare to Shielded Cable?
You might ask, “Why unshielded?” Shielded cable has a metal wrap. It stops noise. But it is thicker. It is stiffer. It costs more. You need special connectors to ground it. If you do not ground it right, it causes noise. Our unshielded cable is simpler. It is for quiet environments. If your factory has low interference, this cable is better. It is easier to install. You do not need to worry about grounding. It is lighter. It bends easier. For most instrument signals, noise is not a big issue. The signals are strong enough. You save money. You save installation time. If you need shield, we make that too. But for 90% of jobs, this is the best choice.
Quality You Can See and Feel
We make cables in a modern factory. We check every step. We test the copper purity. We check the insulation thickness. We pull-test the wires. We make sure the jacket sticks tight. We use high-quality PVC. It does not get sticky in heat. It does not crack in cold. The tinned copper is bright. It does not turn black. The printing on the jacket is clear. It shows the specs. This helps you identify the cable later. We pack it on strong reels. The cable does not tangle. We can cut it to your exact length. We strip the ends if you want. We offer custom colors. We offer custom printing on the jacket. We are a factory, not just a trader. We control the cost. We give you the best price.
Why Buy From Us?
We are a professional cable maker. We export to many countries. We know the rules for the US and Europe. We know UL and CE standards. Our cables pass these tests. We have stock for fast shipping. We can make new orders in 10 days. We answer emails fast. We speak good English. We understand your technical questions. We do not just sell wire. We sell a promise. The promise is quality. The promise is on-time delivery. The promise is fair price. We have many repeat customers. They trust us for their big projects. We want you to be our next happy customer.
How to Order and Get a Quote?
Getting a quote is easy. Send us an email. Tell us the quantity. Tell us the length. Tell us if you need special colors. We will reply in 24 hours. We can send you free samples. You can test the quality before you buy big. We accept T/T, PayPal, and L/C. We ship by sea or air. We handle the paperwork. You just wait for the cable at your door. Do not wait. The market changes. Prices go up. Lock in your price today. Contact us now. Let us solve your cable problems. Click the “Contact Us” button. Send us your drawing or specs. We will give you a solution. We are ready to work for you.