Stop Wasting Money on Cables That Crack and Fail
You know the feeling. You install a new machine. Everything runs smooth. But three months later, the control cabinet is a mess. Cables are stiff. They crack when you bend them. The insulation gets sticky from oil leaks. Worst of all, the machine stops because a wire broke inside the drag chain. This is not just annoying. It costs you money in downtime and repairs. You need a cable that moves like the machine itself. It must not break. It must resist oil and heat. And it must last for years. We built this cable to solve exactly these problems. It is not just a wire. It is a reliable part of your machine.
What Makes This Japanese KHD Cable Special
This is a 10.5mm Japanese imported KHD 2-core 2mm² power cable. It is designed for high-end servo motors and industrial robots. The “KHD” standard means high quality. It comes from Japan. This cable is ultra-soft. You can bend it easily. It fits perfectly in drag chains. It does not twist or kink. The outer sheath is special. It resists oil, grease, and coolant. It also handles high heat. The internal conductors are fine-stranded copper. This makes the cable very flexible. It is perfect for moving parts. You use it in CNC machines, robotics, and automated lines. It solves the pain of cable failure in moving applications.
Detailed Technical Specifications
Here are the hard numbers. You need to know if it fits your system.
- Product Name: Japanese KHD Servo Motor Power Cable
- Conductor Size: 2-core, 2mm² (Approx 14 AWG)
- Outer Diameter: 10.5mm
- Conductor Material: Fine-stranded Copper (Tinned for anti-oxidation)
- Insulation Material: PVC or PUR (Polyurethane) for high flexibility
- Sheath Material: Special Oil-Resistant and Heat-Resistant PUR/PVC blend
- Voltage Rating: 300V / 500V (Flexible use in low voltage control)
- Temperature Range: -40°C to +105°C (PUR can reach +125°C)
- Bending Radius: 8x Outer Diameter (Very flexible for tight spaces)
- Certifications: RoHS, ISO9001, CE, UL (Optional)
- Application: Drag chains, servo motor connections, robot arms, CNC wiring
Ultra-Soft and Flexible for Constant Motion
Standard cables are stiff. They fight against the movement of your machine. This causes stress on the connectors. Our cable is different. We use a special stranding technique. The copper wires inside are very thin. There are many of them. This makes the cable “ultra-soft.” It moves with the drag chain. It does not pull back. It reduces noise in the cable track. You can install it in tight spaces. It bends around corners without kinking. This is critical for high-speed machines. If the cable is too stiff, the machine slows down. Or the cable breaks. Our cable keeps your machine fast and safe. It is a true “motor plug wire” designed for motion.
Oil and Chemical Resistance: The “Armor” for Your Wire
Factories are dirty places. There is oil everywhere. Hydraulic fluid. Cutting oil. Grease. Standard PVC cables get sticky. They swell up. The insulation fails. Then you get short circuits. This cable has a special sheath. We call it the “oil-resistant armor.” It does not absorb oil. The chemicals just slide off. It also resists coolant and weak acids. You can use it near washing stations. Or in painting robots where solvents are present. The sheath stays tough. It does not get brittle. It protects the copper inside. This extends the life of the cable by 3 to 5 times compared to standard wires. It saves you from replacing wires every year.
Heat Resistance for High-Load Applications
Motors get hot. Servo motors get very hot when they work hard. If the cable insulation melts, it is a disaster. It can cause fires. It can short out your expensive driver. Our cable handles heat well. The insulation material can withstand up to 105°C constantly. If you use the PUR version, it handles up to 125°C. This is much better than standard 70°C cables. The heat does not make the cable soft or sticky. It stays strong. This is vital for high-power applications. It ensures safety in your factory. You do not need to worry about overheating wires during peak production hours.
Perfect for Servo Motors and Robotics (V90, Siemens, Fanuc)
This cable is a direct replacement for brand-name servo cables. It fits Siemens V90, Fanuc, Yaskawa, and Mitsubishi systems. The 2-core 2mm² size is standard for small to medium servo power. The connector is robust. It locks in place. It does not vibrate loose. The strain relief is excellent. Even if the cable gets pulled, the connector stays tight. We also offer custom lengths. You can order exactly what you need. No waste. It is ideal for retrofitting old machines. Or for building new control cabinets. It makes your wiring look professional. Clean. Organized.
Easy Installation and Drag Chain Compatibility
Installing this wire is easy. It strips cleanly. The ends do not fray. You can crimp lugs on it easily. Or solder it. It fits standard cable glands. The outer diameter of 10.5mm is optimized for drag chains. It fills the space well but leaves room for other wires. It does not “balloon” inside the chain. This means you can pack more wires in the same track. It reduces the size of your cable carrier. This saves space in your machine design. The surface is smooth. It slides against other cables without friction. It is a dream for electricians to install.
Why Choose Japanese KHD Quality Standards
“KHD” is not just a name. It is a standard of precision. Japanese cable manufacturing is strict. Every meter is tested. They check for pinholes in the insulation. They test the flexibility thousands of times. They check the copper purity. You get consistency. Batch after batch. You never get a bad surprise. This is why top engineers choose Japanese specs. It is “set and forget.” You install it, and you do not think about it again. It is built for 10 million cycles. It is built for 24/7 operation. It is the premium choice for serious automation.
Customization and Bulk Options
We are a factory. We do not just sell stock. We make what you need. Need a different length? We cut it. Need a different connector? We crimp it. Need a 3-core or 4-core version? We produce it. We also do OEM. We can print your logo on the sheath. We ship worldwide. For bulk orders, the price drops significantly. We have stock in our warehouse. We ship within 3 days for standard items. For custom orders, we finish in 15 days. We support T/T and L/C payments. We offer samples so you can test the quality before you buy a container.
Get Your Quote Today
Do not let bad cables stop your production line. Upgrade to a cable that lasts. This 10.5mm Japanese KHD 2-core 2mm² power cable is the best choice for your servo motors and robots. It is soft, oil-proof, and heat-proof. It is exactly what you need for harsh industrial environments. We have the best price because we are the source. Click the “Inquire Now” button. Send us your requirements. Tell us the length and quantity. We will send you a quote within 24 hours. Let us build a reliable power connection for your machines. Order now and see the difference quality makes.